Siheyuan: I can simplify skills

Lao Zhou quickly measured it and his eyes widened: "There is no deviation at all, excellent! I originally thought that it would be enough to pass, but I didn't expect that there was no deviation at all. With such a good tool, I feel that technology is not important at all. .I just need to adjust the parameters.”

Guo Dayi also had a smile on his face: "Continue to process. Old Zhou, look at the wear of the tools."

Lao Zhou smiled and said: "Do you even need to look at it? See for yourself! It's not worn at all. It's just that the blade is a little hot."

4.8 "Continue processing, continue processing, and see if the accuracy is affected after the blade tip is heated." Xu Yang also came over.

Because the tool was changed, the processing efficiency suddenly increased several times.

It usually takes the time it takes to process one workpiece, but now four or five pieces can be processed.

And the quality did not decrease at all, but increased slightly.

"The deviation is smaller than before, the processing is very stable, and after the blade heats up, the strength does not seem to have any impact. This tool is so powerful." Guo couldn't help but go up and try it out.

"Little Master, what kind of brain do you have? How come you can do everything!" Old Zhou laughed.

"Who told the little master to read so many books? During the Chinese New Year, I didn't buy anything, so I bought a bookcase. Then I went to Xinhua Bookstore and bought a bunch of books to fill the bookcase. Later I found out that I bought too many books. There were so many books. They are all the same." Guo Dapai said with a smile.

Everyone laughed non-stop, but they all knew that Guo Dapai was definitely telling a joke.The real situation may be that I bought one or two copies repeatedly.

Xu Yang smiled: "It's a good thing to read books. Fitter can't just read about fitter technology, but also read books on design. In this way, we can read the drawings. It is good for improving processing technology."

"Little master, our eighth-level fitter has reached its peak." Guo Dabo said.

"Then do you think your skills have reached its peak?" Xu Yang asked.

"That's not the case. I feel like my skills are far behind your benchwork skills." Guo said.

"That's it. Technology has no limits. You don't usually feel it, but you can feel it when you encounter difficult processing workpieces." Xu Yang said.

Chapter 121 The development of new fighter aircraft is blocked

All the machine tools in the improvement workshop were replaced with new tools, and then they began to process parts according to Xu Yang's drawings.

The quantity is quite large, and it is impossible for the improvement workshop to take on other tasks in a short period of time.All tasks were transferred to other workshops.

Although several other workshops have also used new machine tools, their processing capabilities cannot be compared with those of the improved workshop.

This made Secretary Yang a little dissatisfied. The only thing the steel rolling mill could withstand was improving the workshops, and the rest of the workshops were really stretched.The gap with the improvement workshop is really too big.Nowadays, junior and intermediate fitters in improved workshops are making rapid progress.In the future, maybe all of them will be staffed by senior fitters.

But other workshops are still the same as before.Not much improvement.

The improvement workshop is also in a critical period now, and it is impossible to split the improvement workshop.After all, improving the workshop is more critical.

What worries Secretary Yang most is that once the improvement workshop fully cooperates with Xu Yang in developing a new generation of machine tools, the rolling mill may not be able to handle the processing tasks of key units.

And there was news that made Secretary Yang even more worried. Over at Beigang, as Beigang's technical staff became more and more familiar with the imported equipment, the performance of the imported equipment was slowly improved.The processing precision is getting higher and higher, and the processing quality is getting higher and higher.It is definitely much more powerful than an ordinary workshop in a steel rolling mill.

Secretary Yang even wanted to postpone Xu Yang's new generation machine tool development plan.

But after just a moment of hesitation, Secretary Yang gave up the idea.

For steel rolling mills, the new generation of machine tools is the most critical.Even if the new generation of machine tools cannot reach the level of the world's top machine tools as Xu Yang said, it will definitely be much better than the machine tool introduced by Beigang.As long as it is stronger than the imported machine tools of Beigang, it will be a huge breakthrough.It is far more important than processing workpieces in key units.

Therefore, Secretary Yang made his choice without hesitation.

Temporarily suspend the processing tasks of key units and fully support 26 He Xuyang in the development of new generation machine tools.

However, Secretary Yang put forward new requirements to Xu Yang.

"Xiao Xu, just by improving the workshop, the development of a new generation of machine tools will take a long time to be completed. How about you also train several improvement groups in several other workshops? If the overall processing level of the steel rolling mill is improved, Now, will the process of developing a new generation of machine tools be much faster in the future?" Secretary Yang said.

Xu Yang is not easily fooled: "Secretary Yang is worried that after the improvement workshop participates in the development of new generation machine tools, our factory will not be able to take on the processing tasks of key units, right?" Xu Yang said with a smile.

"That's true. Without these orders, our efficiency today would have dropped a lot, and everyone's income would have been much less. Especially the investment in improving the workshop was very large, but until the new generation of machine tools was successfully developed, it was almost impossible to make ends meet." Yang The factory director said worriedly.

"That's okay, but based on the experience of the previous workshop, we should first select an improvement group in the workshop. Form a separate group of motivated fitters. This can prevent them from being influenced by those old fritters." Xu Yang said.

There are more or less old fried dough sticks in every workshop.Usually, not only do you not work actively, but you also affect others.If there are too many old people like this in a workshop, the atmosphere in the entire workshop will be completely rotten, and everyone will act like a fool.

"Another thing is that the level of fitters cannot only be raised but not downgraded. There must also be downward assessment. Some fitters have very high levels, but their technical capabilities are declining year by year. Such fitters should be downgraded," Xu Yang said.

"You have a good idea. We must strictly demand that some employees in the factory start to slack off after passing the grade test. If their technology regresses, their technical grade will be downgraded. The same applies to our leading cadres. If they are incompetent, they will be downgraded. Even dismissed." Secretary Yang strongly agreed.

Of course, I agree with it, but whether it can be operated is another matter.If this thing is really to be implemented, there will be great resistance, and there is no such system now. It is difficult to be unique and innovative in the steel rolling mill.

Xu Yang said this, but he didn't really want Secretary Yang to do this.

However, improvement groups for ordinary workshops were established one after another.Workshop employees can join voluntarily.

The second workshop where Yi Zhonghai worked also established an improvement group.

Registration for the second workshop was very enthusiastic.

However, when they saw some of the requirements of the improvement team, many people backed down.The requirements are strict, but the benefits are not obvious.

Yi Zhonghai will definitely not sign up. He is very satisfied with the current situation.Anyway, he is already an eighth-level fitter and has no room for improvement.Even after entering the improvement workshop, he was still an eighth-level fitter.Wages will not be paid a penny more.

Liu Haizhong doesn't want to suffer that crime. He just wants to be an official. There is not much difference between a seventh-level fitter and an eighth-level fitter.Level [-] fitters are still ordinary people.Like Yi Zhonghai, he was still driven to the second workshop.

Generally speaking, the enthusiasm of old fitters is generally not high, and those with high enthusiasm are mid-level and low-level fitters. They still have a lot of room for improvement, and they are generally relatively young.Many people envy the improvement team in the first workshop.Many people become intermediate and low-level fitters and become advanced fitters in one leap.And most of them are level [-] fitters, and the worst are level [-] fitters, which is amazing.

The salary of a low-level fitter is half that of a senior fitter. If you can upgrade the level of the fitter to a senior fitter.Their wages are much higher.Especially for many young people who are about to get married, it would be great if the fitter level could be upgraded to a senior level in a short period of time. It would be easy to negotiate a partner. With such a high salary, he can choose any girl around him.

There is no limit on the number of improvement team members per workshop.Anyone who is willing to join is welcome.But the requirements of the improvement team are very strict.Various tasks must be completed to remain on the improvement team.Otherwise, they will be eliminated by the improvement team.

The workshop improvement team now has rich experience in technical training and improvement.

If lovers can follow the requirements these years, it is really not difficult to improve their skills.

Xu Yang had to transfer several people from the improvement workshop to several other ordinary workshops to take charge of the improvement group.

This time, Zhao Xiangdong and Guo Dapai were not allowed to pass.There are more important tasks for the two of them to do in improving the workshop.

Qin Huairu had been thinking of taking shortcuts before, but now she found that it didn't work.As the three-month deadline was getting closer and closer, she had to improve her benchwork skills conscientiously.It's just that it's a little late.

He didn't have any very good talents, and he was unwilling to put in the effort, so his progress was much slower than others.Many apprentices at a similar level to her have improved their skills.Only she was still moving forward slowly.

"Qin Huairu, your skills haven't made much progress. The assessment is coming soon. Do you think you can reach the level four fitter level?" Zhao Xiangdong asked.

Qin Huairu shook his head: "Maybe not."

"I think you should take advantage of this last opportunity to improve as much as you can. Even if you are promoted to a second-level fitter, you can get an extra 20 yuan a month." Zhao Xiangdong sighed, meeting such an apprentice, He also had a headache.

"Master Zhao, is there any other way? I really want to stay in the improvement workshop." Qin Huairu said.

"I don't have any choice. If you want to stay in the improvement workshop, you must reach the level four fitter level. You are still far behind." Zhao Xiangdong said.

Qin Huairu's tricks didn't work at all on Zhao Xiangdong.

It no longer works even in the improvement workshop, because everyone in the improvement workshop already knows Qin Huairu's routine.

After Qin Huairu got off work, she ran to Xu Yang's house to look for Xu Yang.

"XCMG, can you let me stay in the improvement workshop?" Qin Huairu asked.

Xu Yang shook his head: "Don't come to me about this matter. It's useless to come to me. Even I have to abide by the rules of the improvement workshop. I am no longer the person who improves the workshop, so I won't interfere."

"Xugong, we are all from the same hospital, are you taking care of me? This won't do you any harm," Qin Huairu said.

"Qin Huairu, if we are talking about friendship, it would be fine if I didn't expel you. How dare you tell me that you are from the same hospital? You are stirring up trouble behind your back. Do you think I don't know? Do you want to stay here? To improve the workshop, just improve your skills. If you stay without skills, you won't have a good life." Xu Yang said coldly.

"Xu Yang, that's not what I meant." Qin Huairu said.

Xu Yang ignored it and drove Qin Huairu out.

At this time, Qin Huairu was still thinking of taking a shortcut.

The improvement of the workshop is progressing smoothly, with batches of parts being processed and sent to the experimental workshop in Xuyang.

There is also good news from Secretary Yang.

"We already have information about the batch of parts you want. It may not take long to get them back."

Hearing the news, Xu Yang also breathed a sigh of relief.If he cannot get these things back from abroad, then the completion time of the new generation of machine tools will be postponed indefinitely.

"That's great. The improvement workshop is also going smoothly. Various parts have begun to be processed. However, the situation of each workshop improvement team is not ideal." Xu Yang said.The foundation of an ordinary workshop is compared with the original first workshop.There are not many high-level fitters to begin with, and most of them are low-level fitters.

"Don't rush this, take your time. The basics of ordinary workshops are still a little worse. But I heard that the progress is also very fast, which is not easy. After all, how can ordinary workshops compare with the first workshop?" Secretary Yang said.

In fact, Secretary Yang was also anxious.

Almost all the processing tasks of key units were taken over by Beigang.

During a recent meeting in the ministry, Ding Kechengke, the director of Beigang Factory, made a fuss in front of Secretary Yang.Because the improvement workshop of the steel rolling mill was fully involved in the development of the new generation of machine tools, the ordinary workshop was not able to step up in time.As a result, the processing capacity dropped significantly, and Secretary Yang simply gave up processing special-shaped workpieces in key units.

This time, everything fell on Beigangtou.

But Ding Kecheng was very happy.

Secretary Yang can only count on Xu Yang to develop a new generation of machine tools as soon as possible.At that time, the steel rolling mill will make a desperate counterattack.

Beigang is applying again, hoping to introduce more advanced machine tools.But there are some things that even if Beigang wants to, it may not be able to introduce them.It's one thing to ask for a high price, but the main thing is that you can't buy it.

The big leader criticized Ding Kecheng on the spot, thinking that since the steel rolling mill can carry out machine tool research and development, and Beigang has stronger technical capabilities, why can't it carry out research and development?

Afterwards, the big leader 877 talked to Secretary Yang again.

"Xiao Yang, what's going on? Your improved machine tools are not capable of processing special-shaped workpieces of key units. Why did you suddenly give up all of them?"

Secretary Yang had no choice but to report to the top leaders the news that Xu Yang was developing a new generation of machine tools.

The leader was very surprised: "How is the development progress? When will it be completed?"

"The progress is going very smoothly now, but the important accessories Xu Yang needs have not arrived yet. The ministry said before that there has been news, but as of now, the accessories have not arrived." Secretary Yang said with some worry.

"I will ask about this. I will find a way to get the accessories for you." The big leader said.

At this time, the external conditions are actually pretty good.The accessories Xu Yang needed were not very sensitive.Therefore, after the big leaders intervened, the process sped up a lot.Not long after, all the accessories Xu Yang needed had arrived at the rolling mill.

By this time, the improvement groups in various ordinary workshops of the steel rolling mill had also made great progress.Young people have strong learning abilities and are motivated. Through systematic technical training, their technical skills are improved very quickly.

More than half of the fitters in the improvement team have intermediate technical levels.Several have advanced to the level of advanced benchworkers.But most of them have no level at all.

But the overall level has improved a lot.

Although it cannot be compared with the improvement team of the first workshop, Xu Yang is already very satisfied.Once you reach this level, you can already participate in the processing of various accessories for new generation machine tools.

At this time, Professor Chen from Beihang University participated in the development process of new jet piston fighter jets.It is very difficult to process a batch of parts.

I heard that Beigang had imported sehuabei, so I gave the processing task to Beigang.But what I didn't expect was that none of the workpieces delivered by Beihang were qualified.

Professor Chen was so angry that he lost his temper on the spot.

Ding Kecheng, the factory director of Beigang, personally went to Beigang to apologize, saying that the parts of the fighter jets were too precise and their imported equipment was not up to the task.