Rebirth 2008: I Can Make Money Reading

The latest website: On January 12, the company's new dormitory was opened. Muyang went for a walk and felt pretty good.

On January 13, the land acquisition of 2,000 mu was completed.

When Mu Yang received the notice from the h city z mansion, he felt that the land acquisition was progressing a bit quickly, which was a bit unexpected.

It is estimated that the Chinese New Year is almost here, and the local residents want to spend the New Year with money.

The sooner they sign up, the more perks they get.

If you wait for the New Year, the subsidy will be gone, and you may be forced to requisition land, so the money you will get will be much less.

On January 15, Muyang, on behalf of the company, signed a real transfer of 2,000 mu of industrial land with the Z government. The actual land area was 2,003.5 mu. After paying taxes, the transfer fee totaled 778.5 million yuan.

The district government will assist Xinghai Group in handling the remaining procedures and give the green light all the way.

Now, you can start leveling the land, and when the leveling of the land is almost done, start the groundbreaking ceremony, and plan to have the groundbreaking ceremony after the year.

Xinghai Group found a construction company to level the land.

Office buildings, laboratory buildings, dormitories, canteens, factories, etc. involve a relatively large amount of investment. After the land acquisition is completed, Xinghai Group will invite external bids.

Xinghai's tender this time is an invitational tender, that is, it invites relatively strong and experienced architectural design companies and construction engineering companies to bid. After the year, Xinghai Group will invite relevant experts to assist in the evaluation of the tender documents. The person who evaluates the tender cannot be the bidding company. In the end, Xinghai Group felt that it could open the bid and notify the winning bidder.

After the opening of the bids, the actual construction begins.

Xinghai Group requires all factories and headquarters with 2,000 mu of industrial land to be put into use within one and a half years. Some factories have low requirements and are built quickly, and may be used in July of 2010.

When the construction is completed, the Xinghai Group will be considered to have a decent headquarters, and the territory will be truly complete.

January 17, 2010.

Today is the day of the national trials for the WorldSkills Competition.

The national selection of the WorldSkills Competition is not limited to one location. For example, there are 5 selection locations in the country for the CAD mechanical design project, namely Sucheng Technician College, Longyan Technician College, Dongshan Labor Technician College, Yuecheng Industry and Trade Technician College and Jinshi Technician College.

For the welding project, there are also 5 trial locations, two of which are enterprises, and the other three are technician colleges. Fortunately, there is one in h city technician college.

Muyang has three projects to enter the national trials, but due to the conflict of location and time of trials, it is difficult to coordinate, he gave up the mechatronics project and chose to participate in the cad mechanical design project and the welding project.

If both projects enter the national training camp, but the training location is not in the same city, maybe one will be given up.

Mu Yang didn't know which one of his own can enter the national training camp, so he signed up more and added more achievement points by the way.

The company is only 164 kilometers away from Sioux City Technician College, and it only takes two hours to walk by high speed.

He went to Sioux City on the evening of the 16th and slept in a hotel in Sioux City for one night. The next day on January 17th, he participated in the CAD mechanical design trial at Sioux City Technician College. After this project, he would return to H City to participate in the welding project trial. .

This year's world skills competition cad mechanical design project, the software just uses the soliworks2008 version, of course, the selection of this software, Muyang's software skills have reached the intermediate level of 5.

The competition project includes four modules, including assembly design and engineering drawing, mechanical manufacturing, mechanical design challenge, reverse design, trials and the main competition. The competition time of each module is 2.5 hours, and the accumulated time of the competition is quite long.

The cad mechanical design competition items are all computer operations, depending on the individual's proficiency in the soliworks 2008 version software, as well as the understanding of mechanical design.

No matter how good the contestants are under the age of 22, their proficiency in using Soliworks software is no better than that of mechanical design engineers who have used this software for more than ten years, let alone Muyang.

Mu Yang put on a show on the spot. Each competition module took less than half an hour, and four modules were completed within two hours.

Anyone who has studied CAD software knows that if you are proficient in applying various functions of the software and using shortcut keys, you can draw a gear box quickly. If you are not proficient, you may not be able to finish it in a few hours.

It took Mu Yang about twenty-five minutes to carry out a module, but he deliberately controlled the speed and drew slowly.

Other contestants may not complete a module in 2.5 hours. Excellent contestants also need an hour. Mu Yang directly crushed them.

Of course, drawing fast does not mean that the score is high. It also requires the completion of various topics. For example, in 3D modeling, there are scoring items such as surface modeling, changing part modeling, creating part families, and determining part characteristics.

For designers who often engage in design, it is not difficult.

Generally speaking, in the soliworks competition, domestic competitors are really inferior to foreign reference.

Muyang's competitors are overseas, not at home.

After the game, Mu Yang went back to City H that day, faster than expected.

It will take a few days for the results of the game to come out.

The next day, Muyang went to the H City Technician College to participate in the welding project.

It is impossible to imagine the cad mechanical design in the welding project so fast. Even if Muyang is skilled in welding, it is not much faster than other players.

We weld the same structural modules, the welding process is roughly the same, that is, the welding speed is not much different.

Mu Yang welds very stably and basically does not make mistakes. He has a clear thinking and starts quickly without so many worries. Therefore, his welding efficiency is faster than other players. In general, it is twice as fast as most players.

But the welding of the four modules also took Muyang more than three hours to complete.

Welding is a tiring job. When welding, it is in a high temperature environment, which is hot to the hand. When welding the second protection welding, the welding splashes splash on the clothes, and it is normal to wear a few holes.

In addition, there will be smoke and dust from welding, and it is uncomfortable to inhale the smoke and dust into the nose. If you wear a mask, the mist sprayed from your mouth will spray on the protective lens. If the lens has water vapor, you can't see clearly. Generally, you don't wear a mask.

Welding radiation is also large. If everyone is sweating in the summer, young people don't want to do it.

Those who choose the job type of welder are all because the salary of welders is higher than that of other types of jobs, which is a helpless choice.

Now Mu Yang has a choice, but it is worth it to work hard for a few hours in order to achieve points.

It takes only a few hours of hard work to get to the achievement point, and it's so easy to do other things.

The scoring criteria for the WorldSkills Welding program are very strict.

For carbon steel welding, the weld width error of manual arc welding and gas shielded welding should not exceed 2 mm, and the residual height difference should not exceed 1.5 mm.

When welding stainless steel, the weld width error and excess height of argon arc welding cannot exceed 1 mm.

The distance between the minute is completely dependent on the feel, and can only be mastered by repeated practice every day.

If it is an actual welded product, it can be repaired if there is a welding defect, but in the competition, it is a big mistake, and it is not allowed to polish the surface of the welding seam.

Mu Yang's competition works are perfect and won unanimous praise from the judges on the spot, and he also shot a lot of videos about his operation.

Muyang left the Technician Academy after participating in the welding competition. He could also guess the result, and there would be no problem in entering the national training camp.

three days later.

The results of the WorldSkills National Trials are out.

There is no doubt that Muyang's two participating projects have all entered the national training list, and won the first place in the selection competition, which is much higher than other competitors.

But he received a national training notice, and when he saw the document, he sighed and felt a little regretful.

Both Mu Yang and Feng Younan made a mistake. After being selected for the national training team, they will have to undergo three months of hard training.

The welding project is in Sucheng Zhongye Group. The training time is from January 25th to April 25th. Except for the week when you can go home during the Spring Festival, the other time is the training camp.

For example, in welding projects, the daily welding practice time is more than 8 hours, that is, it is necessary to repeatedly weld several modules to be fixed, which is boring and very hard.

In fact, just like the welders in the factory, they work eight hours during the day and four or five hours at night.

If you enter the training camp, it is estimated that you need to practice for twelve hours a day, which is still the norm.

In the end, out of ten of the national training team, two out of five were selected, and the two welding players represented the national competition.

When participating in the provincial trials, Mu Yang only cared about participating in the competition and did not ask about the national training camp. He came and went in a hurry, and was busy gaining experience.

It is true that he did not investigate clearly himself. He only knew that the final was held at the end of April, and he did not know the specifics of the national training camp.

I thought that like the national football team, the training will be finished in a few days.

It's not that Mu Yang is afraid of hardships, the main reason is that he doesn't have the time to train.

In fact, now that he is allowed to practice for a long time, he is not willing to suffer this.

Mu Yang was in the mood to play occasionally, but he was unwilling to let him practice this for a long time.

The cad mechanical design project training site is also in Suzhou City. The coaching team requires a long training time. They have to attend training every day, and then practice. It is divided into several training stages, which is very time-consuming and Muyang is reluctant to participate.

If you want to represent the national team to participate in the competition without passing the training camp, the coaching staff will not agree, which is very unfair to other training camp players.

However, Mu Yang was also very satisfied and gained a few achievement points.

Just received a prompt from the reading system.

[System prompt 1: Welding project won the first place in the 40th World Skills Competition National Selection Competition, achievement point +2]

[System prompt 2: The CAD mechanical design project won the first place in the 40th World Skills Competition National Selection Competition~www.readwn.com~Achievement point +2]

Total Achievement Points: 70

If you can represent the country and win a gold medal, you may have 5 achievement points for a project, maybe more.

It takes too much time. It takes three months. Of course, it is not worth it. With this time, it is better to brush up experience and obtain invention patents.

But if I gave up like this, it would be a pity, and I finally went to the country for training.

Mu Yang touched the stubble that he hadn't shaved for the next two days, and thought to himself: Otherwise, try that, maybe you can participate without participating in the national training camp.

If it is the Universiade or the Olympic Games, no matter how strong the strength is, Mu Yang doesn't think that method will work.

However, this WorldSkills competition, maybe.

7017k