Rebirth 2008: I Can Make Money Reading

There are too many technologies that can be purchased at Level 5. Muyang browsed for several hours, took a break, and read an unknown number of technologies, from automobiles, mobile phones, batteries to software, to the home appliance industry, to…

At present, he has seen the partial door - oral dental filling materials.

"A highly viscous dental filling material", seeing this technical title, Mu Yang suddenly felt a toothache.

He certainly doesn't have cavities at the moment and doesn't smoke.

But in his previous life, he had a knocked front tooth, and there was a small gap.

The reason why the front teeth collided was that the beer cap was knocked on, and the fork could not be installed. Instead, a small gap was knocked, and there was one more defect in the ordinary appearance.

Muyang has seen several dental hospitals, and the doctors all said that the gap is too small, it is impossible to extract the teeth and implant the teeth.

Anyone who has implanted teeth knows that they need to inject local anesthesia first, pull out the original tooth, and then screw the stainless steel screw into the alveolar bone based on the lower structure in the root bone tissue to tightly close the soft tissue wound and implant. Healing takes 4-6 months, the purpose is to make a slot to put porcelain teeth.

A second surgery is required, an impression is taken, and a porcelain tooth is placed.

Mu Yang has never done it, but he has seen related videos, and now he has a toothache just thinking about it!

These dentists are so violent, is this a human thing? !

The doctors all said it didn't hurt, it wasn't him who pulled out, and it wasn't him who hurt, and all they said were **** comforting words.

He had his wisdom teeth pulled, and although it wasn't heart-piercing pain, it was heart-wrenching pain. Fortunately, the doctor was very skilled and helped him get it done in ten minutes. His face was swollen for a few hours, but the pain after that wasn't a problem. What, it is trouble to eat.

But after pulling it once, I definitely don't want to do it a second time, and the psychological shadow is huge.

Men are okay, children and women who are afraid of pain are absolutely crying, and being beaten doesn't hurt that much.

Therefore, it is impossible to extract the implant teeth with the bump of that kind of tooth.

In stomatology, no matter what kind of teeth are implanted, they are not as good as the original teeth, so it is necessary to take good care of the teeth.

How to fill a gap in a tooth without a dental implant?

Of course there are materials to fill up.

Mu Yang had made up for it twice in his previous life, and the doctor asked him, "There are 2,300 yuan and 500 yuan, and there are 800 yuan. Which one do you want to do?"

This is not nonsense, of course the best!

Knowing that he was being fooled, the doctor also grasped the consumer's psychology, but for the sake of appearance, he also endured being slaughtered.

Whether the material used was photocurable composite resin, glass ionomer composite or nano-resin, he could not remember.

As a result, in less than a month, it fell out!

I almost ate it in my stomach, it makes me sick to think about it.

Hehe, Doctor of Conscience, what about your virginity?

Do you want to make more?

For the sake of appearance, of course!

Then I will change to the best dental hospital in the city. I believe that the technology will be better and the materials will be better. It does not require a year, but it can stick to it for half a year. At least it can ensure that his front teeth will not affect his handsomeness.

He is willing to spend no more than a thousand yuan a year to maintain his handsomeness.

Let the doctor use the best materials, the best technology, and have no shortage of money. In fact, Muyang is very distressed about money.

The doctor told the truth and advised him not to do it. He said that if the adhesive is not strong, it would be good for a few months. He said that there is no high-end technology that can solve this problem.

Those advertisements are unbelievable, and what they say is not easy to fall off.

Mu Yang didn't listen to the persuasion and felt that he was not bad for money, so let's try again.

As a result, it fell off in less than three months.

It turns out that "not easy" to fall off does not necessarily mean that it does not fall off!

After that, Muyang never went to the dental hospital to fill gaps in his teeth. Even by 2022, there will be no dental filling materials in the world that have strong adhesion, are harmless, and match the color of the teeth.

It only needs to spend a few hundred dollars, no pain, no tooth extraction, and the repair time is extremely fast. If there is this new material, it will be a revolution in the oral cavity!

Filling repairs before minor cavities are found!

There are gaps, fill and fix!

Unsightly teeth, polished and refilled!

Muyang believes that this new type of material has many metamorphoses.

In 2008, the domestic oral market will reach 100 billion yuan, the M country will be more than 100 billion US dollars, and it is estimated that the global market will reach 200 billion US dollars, which is a very huge market.

Muyang searched the Internet again. According to public data, the number of dental clinics in my country in the past two years is about 300 million, the unit price per customer is between 300 and 400 yuan, and the market size of the service is between 70 billion yuan and 100 billion yuan;

The number of consumers of teeth cleaning items is the largest, accounting for 67%, followed by fillings and whitening, accounting for 13% respectively.

Dental fillings are the most expensive, with a market size of 50 billion yuan.

The data is not true or false, but there is not much difference, and the core structure is relatively reliable.

The domestic composite resin and nano-resin market has an output value of about 4 billion yuan. At present, the best dental filling materials such as 3M Aesthetic Light-Solid Composite Resin, Cole Sonic Resin, and Fuji IX are all imported, and the annual import exceeds 4 billion yuan. .

Note that this refers to the market size of raw materials, the sum of the output value at the ex-factory price, not the market size of end services.

These billions of dollars were all swept away by foreigners!

Mu Yang remembered that in 2020, he bought a 4g 3m light-curing composite resin from T-bao, which cost 125 yuan, and more expensive ones.

The competition for T treasure is fierce, and the profit margin is not high~www.readwn.com~ He estimates that the ex-factory price is 70 to 100 yuan, but the terminal sales, that is, the service price of the hospital, is several hundred yuan.

That is, if it is the terminal service market, the annual domestic market size exceeds 10 billion yuan.

And this is only the domestic market.

The global market will be a super cake, waiting for Muyang to tap.

In this way, the data of the market size are closely related.

If there is that perfect material, the oral market will be bigger, who doesn't want to spend a little money to restore the teeth to be more beautiful.

Materials, the core is the formula.

Mu Yang opened the introduction of this technical document with great expectations, hoping to meet his requirements.

Don't let me down! !

Whether you can make a fortune depends on you!

"A highly viscous dental filling material"

【Light-Solid Nano-Resin Technology SM01】

【Introduction: A light-solid nanomaterial is made of composite resin and calcium phosphate and calcium carbonate of teeth.

Bond strength, hardness and color reach 95% of the original teeth.

The raw materials are easy to obtain, but the composition requirements are strict, and the process is complicated. The production temperature and temperature requirements are strict, and manual manufacturing is difficult to obtain. Fully automatic material separation and mixing equipment is required. 】

[Achievement point: 10 points]

[Disciplinary requirements: polymer materials and engineering (polymer molding technology level 5, polymer synthesis level 5, polymer processing principle level 4...), biomedicine level 4, nanomaterials and technology level 4, automation level 5 (software technology level 4) Basic level 5, motor and driving level 4, system simulation level 5, circuit level 4, signal and system level 4, analog electronic technology level 4, automatic control principle level 4, process control level 4...)]