Rebirth: I carry a desktop computer inside me

The whole machine was very well prepared by Jiang Cheng, and some small problems were solved, that is, the appearance, and there were also packaging boards, which were a bit like a high-tech lithography machine.

It's the kind of thing that at a glance, you feel that this thing is high-end, not casually.

Of course, the results of the experiment are also very good, and after Jiang Cheng led everyone to continue to optimize and adjust, especially after optimizing the process such as what rate each step should be and how long it takes to run, the overall lithography effect is good.

Moreover, through an experimental multiple exposure, the final process minimum node reached 32nm.

Bai Chunhua is the president of the Chinese Academy of Sciences, still has an understanding of this piece, after personally checking the measurement parameters, his hands were excited, "It's true, our lithography machine has really broken through, the 28nm process, just around the corner!" "

Through the immersion system, the laser wavelength of 193nm is set to 132nm, and the minimum process of 45nm can be reached with one exposure!

After multiple exposure technology, it can advance to 32nm, 28nm process.

Yi Guobin also raised his thumb to Jiang Cheng, "I know that your kid will definitely be able to give us a surprise when he enters the magic capital, but I didn't expect to see it so soon!" He

Ming's old face on the side blushed, "Minister Yi, you are right, Jiang Dong's research in the field of lithography machines is really the only person in China, and I admire this piece extremely much!"

Yi Guobin nodded, "Okay, I know that you didn't add chaos to R&D this time, so let's cooperate with Jiang Dong well in the future." "

Understood." He Ming answered.

Now, Jiang Cheng has made an immersion lithography machine, and his position in the magic capital is more solid.

How could those shareholders replace Jiang Cheng?

Alas, forget it, it's also good to be an executor.

Jiang Cheng smiled slightly, "It's still too depressing here, Dean Bai, Minister Yi, let's go back to the conference room." "

Hmm." The two nodded with smiles.

Later, he shook hands with these R&D engineers one by one and expressed his gratitude.

Only then did they change into lab clothes and go to the board room of Moduwei.

"Jiang Dong, looking at it now, is it difficult to reach the process of 28nm?" Yi Guobin asked first, he is not professional after all, although he knows some, but what he has seen is the realization of the 32nm process.

Jiang Cheng explained, "From the 45nm process to 28nm, FAB factory engineers need to work together to improve the process level and achieve it through multiple exposure technology. This technology is not difficult to implement.

"That's good." Yi Guobin was a little relieved. "Nowadays, the Internet has spread, we have developed a 28nm domestic lithography machine, the majority of netizens are looking forward to it, we can't let them down!"

Jiang Cheng nodded slightly, "We understand this, we are currently optimizing this prototype, and at the same time we have purchased a batch of components, which can be supplied to FAB factories at home and abroad."

"How much does it cost?" Bai Chunhua asked.

"At present, we are still doing research and accounting, because of the prototype piece, we have improved dozens of times, and the cost accounting part will be more difficult." Jiang Chengdao, did not disclose the price for the time being, "But I believe that compared to ASMAL's DUV lithography machine, it is still a lot of savings."

Bai Chunhua nodded, "That's good, when the acceptance is time, the initial date is late September, is it time?" "

Acceptance is no problem, our prototype is ready at any time."

"Cheng, then we will give everyone good news before the National Day!" Bai Chunhua glanced at Yi Guobin and said with a smile.

The whole machine acceptance, the alliance will organize a group of more professional people, including the technical representatives of the domestic FAB factory will also come over, so that we can see together, whether this machine can be successful, can it be commercialized.

Yi Guobin asked again, "What's Jiang Dong's plan next?"

"At present, it is to ship a batch of 3200A," Jiang Cheng said approximately, "next year, on the basis of improving this version, I want to start research and development on EUV lithography machine." At

that time, Jiang Cheng planned to find a place.

This magic capital is micro, the place is not large enough, and when the immersion lithography machine is shipped in large quantities, the whole machine assembly plant is a little crowded.

Bai Chunhua said happily, "Well, with Jiang Dong in Moduwei, we believe that the domestic EUV lithography machine will also be developed one day!" He

Ming was also a little excited on the side, this Jiang Dong is really awesome, if he is there, he must first ship this immersion lithography machine to make money, and slowly improve it.

You must know that now, the whole lithography machine has approached and reached the high-end chip process!

The current chip process is 22nm, which is an immersion lithography machine through multiple exposure plus FinFET technology, can be realized.

Of course, this piece mainly depends on the process capacity of the FAB factory, and although there is a relationship with their lithography machine, it is not particularly large.

Jiang Cheng said modestly, "The EUV lithography machine is too difficult, I can't be sure, I can only say that I should start the research first, after all, no matter how difficult it is, you have to take the first step, don't you?"

"Yes, Jiang Dong said this well!" Yi Guobin slapped the table and said enthusiastically, "It's Mount Everest, if you don't start walking at the foot of the mountain, it's impossible to approach or even arrive."

Bai Chunhua's blood also boiled, "Jiang Dong, you can rest assured to boldly research and develop, I believe, these shareholders, will fully support, Omi countries, a few have provided an Asmer, I still don't believe it, our Hua country is the power of the country, and we can't supply a magic capital!" Everyone

chatted hotly for a while, and then also talked about confidentiality.

In this area, Jiang Cheng said that he will strengthen management, of course, as for the leaker, he has been fired, and there will be corresponding punishments.

Yi Guobin said that the Ministry of Security will also arrange some people to station in to prevent the leakage of core technologies.

Several people ate a light meal in the magic capital at noon and left.

Jiang Cheng conveyed the relevant requirements at the top of the organization, and asked He Ming and Lian Guanghao to prepare for acceptance.

That evening, Jiang Cheng returned to Kyoto first.

He was going to see the two heads of the house.

---٩(๑•̀ω•́๑)۶-

-On the Internet, the matter of immersion lithography machines has slowly cooled down, because the official media has not given an official news, which makes many people think that this is another hype.

[The sky and the earth are my biggest: look, where there are any 28nm lithography machines, all of them are deceptive, thanks to those fools for an orgasm. ]

16351153: That is, I see that if I give it another five or six years, I can't develop it, so let's be obscene.

Big A needs ICU: Can't you see, just that day semiconductor rose a lot, today is a big fall, hey, they made money to buy, but bitter just bought us stockholders, don't say, see you on the rooftop....

AmriGreat: I'll just say a few hehes.

......

For these comments, on the high-speed train back to the high-speed train, Jiang Cheng also looked at it, feeling a little funny, but also a little uncomfortable.

Wasn't he also such a teenager before?

I will also be happy to see the news of these technological breakthroughs for half a day.

But waiting and waiting, but disappointed.

It's like a lithography machine, which has been disappointing.

......