Return
Chapter 44: 3.14 I dare to learn and teach.
Six days later
Shipyard No. 3 of Toulon Port, Oka Empire.
The huge steam engine was knocking on the parts. The crimson steel hissed during the heat treatment. Putting on the workers' clothes, Bingnuo has been examining the machinery here after entering the factory.
The gun flame family's factory mainly produces army arms, and this heavy industry factory is mainly shipbuilding and smelting steel rails. Some of the heavy equipment is not available in the gun flame family, but many of them are only partially operated. The part of the mechanical shaft that is not running is fixed together in metal rust and oil stains.
Bingnu jumped away from the metal poles scattered on the ground, and stunned the wine bottles and the unmaintained machinery in the corner of the factory. Began to count.
And soon a 40-year-old mechanic stood in front of Binghe, looked at Binghe with skeptical eyes, and asked, "Are you a mechanic?"
Binghe nodded nicely.
The mechanic frowned and pointed to the two steel plates hoisted on the side of the mechanical boom. "Weld the two steel plates together. Give you half an hour."
Some of the workers in the surrounding area looked at them with a lively look.
#
Five minutes later, Binghe took off the blindfold covering his eyes, and said to the stunned middle-aged mechanic: "Can you do that?" In the noisy sound environment of the people around at the beginning, the whispers of theft, the hammer in the factory The knocking sound also slowed down.
#
Spectral vision,
High temperature lock zone,
Air separation
Inert gas restraint,
...
And one by one the temperature-guided light strips are docked from the welding site, and the temperature is controlled extremely accurately. Bingbing fully benchmarked the teaching standards of Sugaot that year. Do it. This is an orthodox state of work that only the top mechanics understand.
If it is an orthodox mechanical controller from the Imperial Academy of Machinery of the Oka people, although some details of the operation are different, but it is also the best to ensure every seemingly simple industrial step.
What is invisible to a large number of mechanics is that on the one hand, the consciousness of small workshops cannot understand the specific role of the detailed control of these fine operations. Most of the small mechanic families run workshop-level factories. Because they do not understand the role of some links, many of the details of the machinery products they make are rough.
#
In this loosely managed factory that is almost becoming a folk workshop, it has not been seen for nearly two or three decades.
Some young workers, although they don't understand what this means, they look novel and look at so many magic control systems. They speculate on the occupational grade, family background, and identity of the child in the factory.
A few old workers directly spoke the term mechanical controller, and then watched the reactions of the mechanics in the factory, while the mechanics in the factory opened their eyes wide and stared at them. Check a series of steps. Don't want to miss any details. The knowledge of these family of machine controllers appearing during operation.
#
Dozens of magics are used smoothly, keep five magics running at the same time, and reach seven magics at the highest peak at the same time.
On the one hand, this is the teaching of the celestial tower teacher, and on the other hand, Binghe wants the dominance in the factory.
Note: Bing nuclear is already the best level of the gun flame family mechanical controller. After Binghe uses the gun flame family method to make bug corrections, Binghe is still pushing this set of methods in a higher and stronger direction.
#
When the Bing nuclear operation was completed, the factory was noisy and noisy. The middle-aged mechanic looked at Bing Bing nuclear with three-point shock, three-point complexity, and four-point respectful eyes.
After sorting out his emotions, the middle-aged mechanic looked at Bing nuclear. Say: "You just said you were a mechanic?"
Binghe smiled: "Yes, I was a mechanic two years ago, and my current professional level has not been tested."
The middle-aged mechanic opened his mouth and said, "What are you going to do in this factory?"
Binghe bowed deeply and said, "Learn knowledge, exchange experiences, and recognize your own shortcomings. Please advise."
Bingwei checked out the mechanic and stretched out his hand, saying with a smile: "I hope to work with you, I believe this factory will become better."
#
Steam calendar 1025, November.
The freshest thing about Toulon in the south of Oka is the appearance of a young machine controller.
At first the news was treated as a joke. Thirteen or fourteen (the age of Bing Nu was guessed in the general direction) is a minor mechanical controller. This is completely out of common sense. The general age of machinery controllers across the continent is after the age of 27. The biggest record is sixteen.
However, after a few months, this 'fake news' seemed to become more and more real. Because a special machine was built in the Toulon shipyard.
In the steam roaring factory, the blades on the flywheel were installed one by one. The mechanical metal shaft on the flywheel exudes brilliant colors.
For large steam turbines, the Oka Empire has always mastered its own technology. This technology involves the guarantee of maritime hegemony for large battleships of more than 20,000 tons. In the past, the Oka Empire blocked 20,000 tons of high-speed battleships. It has been a good blockade.
#
The production technology of a country is generally not so easy to leak, because the technical system is more than just superficial stuff on paper.
Only senior engineers from other countries use the corresponding equipment in the factory to go through the entire production process. Try all the processes that may go wrong. It is considered that technology has leaked to foreign countries.
And even the technology production chain. Making a finished product for the first time does not mean mastering the technology, putting it into use later, giving feedback on the effect, and establishing a maintenance mechanism that should deal with the problem. This is considered mastery of technology. (This means that the country has this industry demand, which can allow this industry chain to grow.)
Therefore, some high-tech factories on the earth can be visited by non-technical personnel. As long as they do not take pictures, these visitors can only roughly see that the factory is very advanced, and the specific advanced is in that detail. Visitors can't help but say so. But for technical colleagues to visit, it ’s ‘pregnant at a glance’
#
The production machinery and equipment in this world is only suitable for the operation of senior mechanics. These devices are placed on the earth, and it is difficult for the earth's workers to achieve quality control to produce qualified industrial products. Ordinary workers can't see the temperature through the spectrum, and can't see the flaws in the heat-treated material through the ultrasonic induction. So ordinary people at the grassroots level have no control over the entire production.
In theory, only a mechanic can steal a teacher.
And even if the machinist ran over to steal the teacher, he had to go to those big factories to steal the teacher. There are only large factories with mechanical controllers. Some complex processes are in production. These processes are in operation and may be seen by foreign mechanics and steal the details of the process.
The focus of the Oka Empire's technical secrecy work is in those large factories.
Toulang Port No. 3 Factory has no experience in producing steam turbines for decades (there were production decades ago). Without production steps, how could a technology leak occur?
All the databases are dusted in the big iron gate. As long as these paper materials are not stolen, note: more than ten tons of materials cannot be stolen. This is for trucks.
#
However, the Oka Empire did not even think that there was another extreme situation, that is, a mechanical controller ran under his eyelids. In other words, this is not a steal of technology, it is basically international assistance.
In this chaotic factory, the person in charge of the factory saw that Bing nuclear was sent by the navy, and thought that it might be a trial disciple from a large family of the Oka Empire.
They opened the database for review.
Of course, you can't read more than a dozen tons of information, and of course you don't have to read it. Because more than a dozen tons of data, those equipment parameters are recorded. These devices are now available in the entire factory, and basically after renovation.
There are a lot of materials that workers in all links need to look at. Binghui directly communicates with workers in production. If he looks at the process in person, he can see clearly the information to be explained in a dozen pages of books.
#
As for the upper intelligence organization of the Oka Empire, I heard that the so-called foreign 14-year-old machine controller ran to a small factory in Oka and did not believe the authenticity of this information.
And because Bing nuclear is a captive of the navy. Involving the Navy department, cross-departmental matters are troublesome. The intelligence organization was temporarily put down. After seeing this information, the intelligence chief thought that this was a daydream of the commander of the Southern Fleet doing a pie in the sky.
But in the past four months, things have gone awry.
#
In November, when Bing Nuclear arrived,
Binghe is very interested in discussing the most advanced production technology of the factory with the mechanics in the factory.
This made the Toulon plant's mechanics burst into tears, which was the decision to focus on the Toulon plant. Note: Binghe did not bring any funds, and there were funds in the factory. The naval component of the Port of Toulon also has some funding. The identity of the machine controller is itself a large-scale investment.
In just one month, the large-scale equipment sealed in the warehouse was inspected and repaired. Then began the production process. From the key alloy steel is made from the steel furnace to the drilling knife processing. Binghe is involved.
According to the information, using the auxiliary magic one by one, controlling the temperature, stabilizing the tools, and judging every slight change in the manufacturing process. In this process, the workers' production experience is checked,
And in the actual operation, observing the details is equivalent to serving as a measuring ruler in the operation of each worker. They don't have details such as spectral vision, observing magic,
If workers do not promptly remind them to pay attention to measurement in detail, many links will be operated by guessing. Eventually, a large number of errors will be accumulated in the product without knowing it, making this complex industrial equipment unusable.
Each person's habits are different, and their personal differences are different. The individual's feel and eyesight must be grasped to this extent. It cannot be recorded on the paper information. You must get clear instructions many times during the operation.
#
After a series of stumbling trips, with the efforts of the entire factory, the large-scale steam turbine finished product was manufactured. After passing the factory inspection, this product was qualified, and it was quickly dragged away by the naval military police officers waiting.
The steam turbine was then pulled to a military base three kilometers away from the factory for testing. When military bases, when most of the performance parameters are tested.
The commander of the Southern Fleet notified the Minister of the Navy of the Oka Navy by telegram.
The commander then preemptively placed an order for twenty large marine steam turbines at the Toulon shipyard. And paid ten percent. A contract penalty of more than forty times was set.
The Southern Fleet Command notified the above that it was to come over quickly to control the people, and to place an order first, before the other fleets came to grab the people, first arrange the task to tie the people to the Toulon shipyard.
If you like returning, please collect: (www.readwn.com) Returning to the literature is the fastest.
You'll Also Like
-
You said you were good at archaeology, but your tattoo of the Nine Dragons pulling the coffin has be
Chapter 1767 3 hours ago -
Starting from traveling through Naruto, who says archers are weak
Chapter 203 3 hours ago -
I was imprisoned by the Empress at the beginning, and I was secretly invincible
Chapter 716 3 hours ago -
Pirates: Get the telekinesis fruit at the start!
Chapter 145 3 hours ago -
Hong Kong Film: The Positive Energy System of the Hongxing Boss
Chapter 592 3 hours ago -
Naruto: I am immortal and can open the eight gates infinitely
Chapter 183 3 hours ago -
Naruto: Reborn as Uchiha Itachi and kill Danzo first
Chapter 88 3 hours ago -
The Peerless Fisherman: The Counterattack Started from Accidentally Entering a Fishing Village
Chapter 245 3 hours ago -
The ghost knocked on the door, luckily I was able to read the save file!
Chapter 105 3 hours ago -
I asked you to teach the worst class, but you made it the best in the school?
Chapter 229 3 hours ago