Siheyuan I can simplify skills

It is indeed not enough to manufacture fighter jets with tens of thousands of employees in a steel rolling mill. But Xu Yang traveled from later generations.

He still knows a lot about automated assembly lines. During the development process of fighter jets, he had already begun to consider developing automated assembly lines for fighter jets.

It is almost impossible to achieve a fully automatic assembly line in future generations at this level of technology, but it is still possible to achieve semi-automatic assembly.

With the improvement of a large number of fitters in the workshop who have mastered the operation of CNC machining centers, there are now enough operators of CNC machining centers, but there are not enough CNC machining centers.

Xu Yang began to consider realizing the automated assembly of CNC machining centers to speed up the production efficiency of CNC machining centers.

“Lao Guo, please arrange for the CNC machining center workshop to process this batch of parts first.”Xu Yang handed a batch of design drawings to Guo Dayaozi.

“Little Master, what did you plan?”Guo Dapai asked.

“You’ll know when it’s made.”Xu Yang sold it out with a smile.

Guo Dashui was also used to it. Anyway, this thing must be a good thing. Otherwise Xu Yang would not be in a hurry to get this thing.

After Xu Yang handed over the task to Guo Dashui, To manufacture integrated circuit boards. This integrated circuit board is more complex than the circuit board of a CNC machining center.

“XCMG, what kind of control center is this? Why is it so complicated?” asked Lin Yong from the Department of Electronic Engineering.

“You’ll know when it’s built.”Xu Yang still said the same thing.

Lin Yong knew that Xu Yang was keeping this matter secret, so he didn’t ask again.

Here at the steel rolling mill, they saw too many things that far exceeded the domestic technological level.

The CNC machining center, even for people like them, I have only heard of it, and only a few developed countries have developed it. I didn’t expect to see domestically produced products in steel rolling mills. In addition, turbofan aviation is still in the preliminary research and development stage internationally. But Xuyang’s experimental workshop It is already in stock, and 21 has passed the test of Beihang Aviation Development Laboratory.

Xu Yang said before that he wanted to build a fighter jet, but the integrated circuit board Xu Yang gave them this time was a bit incomprehensible.

But Lin Yongyong This integrated circuit board is definitely not simple. It can carry so many components and is already very powerful. Lin Yong even doubted whether this integrated circuit board would be one of the control units of a fighter jet.

Lin Yong’s classmates Chen Yubin and Lin Yong They came to the steel rolling mill together.

Originally they were unwilling to come, but when they arrived at the Ministry of Industry, the ministry directly sent them to the steel rolling mill.

When they got here, they couldn’t regret it anymore.

The graduation allocation has been completed, unless the allocation unit is given up.

But don’t think about finding another job.

As long as the steel rolling mill does not release people, they cannot be reassigned.

Without a reassignment certificate, they cannot work in any other unit.

But

Lin Yong and Chen Yubin are very happy to be here. Maybe coming here is the best choice. You can’t see such an advanced CNC machining center in any domestic factories and research units.

And they have begun to have a certain understanding of Xu Yang.

Although Xu Yang is now He is a graduate student of Qingdao University, but in fact, Xu Yang did not even go to high school.

However, Lin Yong can say with certainty that there is no scholar in the country who is more knowledgeable and profound than Xu Yang. He is simply an omnipotent scientist.

“Yubin, what do you think this integrated circuit should be used for? Lin Yong asked.

Chen Yubin shook his head:”I can’t tell, but this integrated circuit board must be very powerful.” It’s even more complicated than the control system of a CNC machining center.”

“That’s right. Do you think this could be the control system of a fighter jet? Lin Yong asked

“Hard to say. Anyway, I can’t understand this XCMG.”Chen Yubin smiled bitterly.

“If we could understand him, we would become omnipotent scientists. I really don’t know how he learned so much.” Lin Yong said

“The gap between people is huge. Don’t compare yourself to some people, otherwise you will be ashamed to death.”Chen Yubin laughed.

“Well, you should never compare yourself to people like XCMG. It’s not that people can’t go to college. It’s that they don’t have to go to college. People who go directly to graduate school are even better than their tutors.”Lin Yong said with a smile.

When all the accessories Xu Yang needed were gathered, several sets of integrated circuit boards were made. At this time, Xu Yang began to assemble.

Helping on the side were Guo Dazhi and others who were from improvement workshops. quasi-engineers. There are also college students such as Lin Yong.

But except Xu Yang, no one knows what Xu Yang is going to assemble.

These sets of things are all assembled in Xu Yang’s experimental workshop.

It can be seen that this set of machines has great influence on Xu Yang. Yang Li attaches great importance to it.

Now the experimental workshop has a CNC machining center, two aviation engines, and a large number of aviation engine parts.

In addition, these sets of parts for unknown machines.

These are all It is something that Xu Yang attaches great importance to.

Xu Yang is very familiar with the assembly of this machine, assembling the parts one by one like a jigsaw puzzle.

The most popular thing became something very weird, but also very sci-fi.

“Is this a robotic arm? Lin Yong asked.

Xu Yang nodded,”It is indeed a mechanical arm.””

“What do you design a robotic arm to do? Lin Yong asked in confusion. I feel that a mechanical arm is not very useful.

“You’ll soon find out.”Xu Yang said with a smile.

Xu Yang installed a batch of robotic arms in succession, forming a large mechanical array in the workshop. When the robotic arms ran, they moved very slowly. Lin Yong and others could not see what else this robotic arm could do. Can it still replace human labor? A robotic arm is not as efficient as a worker. So many robotic arms may only be able to replace the work of a few workers, which is not worth the gain.

Xu Yang constantly inputs parameters into the machine in the storage unit of the arm.

It took a long time to complete the input of all system commands and the settings of the robotic arm.

“Lao Guo, go get a set of parts for a CNC machining center. Check out the functionality of this assembly center.”Xu Yang said.

Xu Yang put the parts one by one on the conveyor belt, and the workpiece was brought to a specific position by the conveyor belt. A robotic arm immediately stretched out to fix the part, and then another robotic arm just fixed the second part. Send it to the position of contact with the second part.

The two parts are assembled together under the operation of the machine.

Then the two parts are transferred to the next manipulator, which immediately controls the third workpiece. It was installed.

The assembly speed was getting faster and faster. Almost no one at the back site could clearly see how the machine installed the parts of the CNC machining center in order.

The further you went to the back, the faster the speed. A CNC machining center, It took Xu Yang several days to assemble a CNC machining center without any helpers.

However, using an assembly production line, it only took two or three hours to complete the assembly of the CNC machining center.

Lao Guo, Bring this CNC machining center to the No. 0001 CNC machining machine for testing. Xu Yang said.

Guo Dali was not ambiguous at all. He immediately took a few fitters to move the CNC machining center that had just come off the assembly line to the No. 0001 CNC machining center. Next to the machining center. Then began to process some complex workpieces. (To read Baoshuang novels, go to Feilu Novel Network!)

Each exquisite workpiece is produced from the No. 0002 machine tool. They look like works of art.

“Master, please go and measure it to see if it meets our own standards.”Xu Yang said.

Zhao Xiangdong immediately took the measuring tool and started measuring.

This CNC machining center has not yet been debugged, and the parts processed are already of excellent quality.

“Xu Yang is excellent! This CNC machining center is more precise than one assembled by hand. This assembly center is amazing! The assembly speed is really fast,” Xiang Dong said excitedly[]

Guo Dapizi figured it out

“Little Master, tell me the truth, is this assembly center just to test the possibility of using the automated assembly center for fighter jet manufacturing?”Guo Dabozi asked quietly while there was no one else around.

“Don’t pry when you shouldn’t pry. If our fighter jet is built, maybe it will become a secret here.”Xu Yang said.

Guo Da Paizi was convinced:”That’s okay, I won’t ask anymore.”

With the establishment of the CNC machining center assembly line, the production efficiency of the CNC machining center has increased several times.

If the parts production can keep up, Xuyang can even produce dozens of CNC machining centers a month.

In this era , The assembly center of a fighter jet is still extremely difficult. But what Xu Yang wants to build is not a truly fully automatic transfer center, but the assembly of large parts of helicopters, which is not that complicated. The assembly of some small parts is It can all be done manually, but Xu Yang can design some labor-saving tools to improve the efficiency of assembly. This includes the assembly of aircraft engines.

When Xu Yang assembled aircraft engines before, he needed a large group of fitters to help. If equipped with assembly machinery, Xu Yang can complete it relatively easily by himself. The efficiency of assembly will be improved a lot.

After all, the fighter jet Xu Yang wants to develop is not a fourth-generation fighter jet, but a third-generation fighter jet, which can meet current needs.

Through the research and development of third-generation fighter jets, Cultivate a large number of technical personnel. When developing fourth-generation fighters or even fifth-generation fighters in the future, the aviation industry may be full of talents and have very strong technical reserves.

But even just the development of assembly centers is extremely time-consuming and labor-intensive.

And many There are already signs of wind blowing in the place. Even in the steel rolling mill, something is not right.

What makes Xu Yang very helpless is that instead of Deputy Director Li, Deputy Director Sun has come. Deputy Director Sun became the steel rolling mill Director of the Revolutionary Committee.

As soon as the limelight came, Deputy Director Sun followed the trend.

In the end, Secretary Yang was implicated by the big boss and was soon dismissed from his post.

Director Sun immediately stopped Xu Yang’s research and development Activity

“XCMG, you are going in the wrong direction. If you replace labor with machines, what will our working class do in the future? Director Sun asked

“Director Sun. It is because of the nature of our society that we cannot exploit workers like capitalists do. Think about it, if we replace most of the manual work with machines, will it free the working class from heavy labor? Allow them to pursue their higher dreams. We are in a new society now. Shouldn’t the working class live better than in the old society?”Xu Yang asked.

How could Director Sun dare to answer this casually?

“Of course, the working class is better off in the new society than in the old society. Director Sun said

“The machines I develop are meant to make the working class less tired and make their lives better and better. This direction should be consistent with your direction, Director Sun. Isn’t this the direction Director Sun is heading in?”Xu Yang asked

“Of course it is in this direction. Comrade Xu Yang, you have misunderstood my ideas. In fact, I have always been very supportive of your research and development activities.”Director Sun wiped the sweat from his forehead.

Educated people are really terrible. They will dig holes for you accidentally.

Director Sun doesn’t dare to touch Xu Yang. Because Xu Yang’s family background is so good. There are a lot of fitters in the factory to support him. Guo Dabozi also has a team of people, and he is also a huge force in the steel rolling mill.

“Young Master Liu, what did the man named Sun want to do with you just now?”Guo Dapai asked.

“nothing. He wants me to stop doing research and development.”Xu Yang said

“Don’t worry, I won’t let him cause damage. I have now brought most of the fitters over, and the security department is also ours. People with the surname Sun cannot stir up much trouble. This rolling mill is now our fitter’s rolling mill!”In order to protect Xu Yang, Guo Dabo gathered a group of people when the wind blew up.

“Lao Guo, don’t get into too deep. Don’t wait until then and you won’t be able to look back.”Xu Yang said worriedly.

Guo Dabozi glanced at Xu Yang and smiled:”Old Guo has always been the only one who cheats others, and I have never been cheated by anyone.”

The Siheyuan also has a powerful character.

Xu Damao is still the same as in the original drama. He turned to Director Sun and became Director Sun’s right-hand man. This time, even He Yuzhu was pulled in by Xu Damao. With the canteen A group of people followed Director Sun.

Liu Haizhong and Yi Zhonghai did not join Guo Dabizi’s fitter team, but turned to Director Sun. Liu Haizhong was appointed by Director Sun as the team leader, while Yi Zhonghai served as the second workshop Director.

This is interesting. Yi Zhonghai and others were originally sworn enemies of Xu Damao, but they all turned to Director Sun. But even though they all turned to Director Sun, the conflicts between them were not resolved. During the day, they fought in the factory and returned to the courtyard. , then fight in the courtyard.

Yi Zhonghai and Xu Damao both want to draw Xu Yang into their respective camps.

“Xu Yang, at this time, you must choose a side, otherwise it will be very detrimental to yourself.”Yi Zhonghai found Xu Yang

“Master, I don’t want to get involved in your affairs, and you don’t want to disturb me. This non-interference may be beneficial to everyone.”Xu Yang said…