Start With a Fake University

Wucheng University of Arts and Sciences, research base center.

Conference room.

Ding Yue convened his best group of teachers and students from Wucheng University of Arts and Sciences to have a meeting here, and will discuss and decide on showing the strength of Wucheng University of Arts and Sciences in semiconductor research.

At the same time, it is also to solve the problem of Feiyue·Future new energy vehicle chip shortage.

"President Ding, the phone number of President Wang of Nationalchip Technology Group."

Just as Ding Yue was about to hold a meeting, Suddenly Secretary Wen Ruohan came to his side, holding a mobile phone in his hand, and said in a low voice.

"Oh?"

After hearing the words, Ding Yue nodded slightly, and then said to everyone in the conference room: "Big guy wait a moment, I'll take a call here."

After all, it was the call from Wang Liwu, President of Nationalchip Technology Group, which may be important, so Ding Yue decided to hold the meeting after receiving the call.

Having said that, Ding Yue took the mobile phone from the secretary Wen Ruohan, then turned and walked out of the conference room, choosing to answer the call in the corridor.

"Hey, Mr. Wang, this is Ding Yue."

"President Ding, congratulations, this wave of new energy vehicles for your leap forward can be said to have created a miracle in the history of automobiles."

On the phone, Wang Liwu congratulated with a smile.

"Thank you, Mr. Wang, but I can't be happy now. Mr. Wang, you should understand what I mean?" Ding Yue said calmly.

"Chip problem?"

Basically, Wang Liwu didn't have to guess anymore. He made this call by himself and said about it.

"At present, we only have an order for 200,000 chips in the National Core Technology Group, which is far from enough." Ding Yue said with emotion.

"President Ding, I really can't do anything about this matter. The last time the board of directors agreed to the 200,000 chips was not easy. Later, we also compensated Penguin Automobile Group for a lot of liquidated damages."

Wang Liwu said that he could do nothing.

After all, there are countless companies that need chips, and orders are already scheduled for next year.

"No, you have to help from the National Core Technology Group in this matter." Ding Yue suddenly said seriously.

"Ah? President Ding, what can our Nationalchip Technology Group help you?"

When Wang Liwu heard this, he was a little confused.

What Guoxin Technology Group can do is to manufacture chips, but now the production capacity has reached the top. To put it bluntly, all equipment is turned on at full power, and it can no longer provide chips for Ding Yue.

Is it possible to be like the Penguin Auto Group in breach of contract last time?

This is obviously impossible, because Guoxin Technology Group cannot offend or abandon the business of other large manufacturers just for the sake of Feiyue Group.

"If we can provide you with lithography machines and other equipment, can the National Core Technology Group be able to produce chips for us?"

Ding Yue asked with a smile.

"what?"

When Wang Liwu heard this, he was even more confused.

But he was not completely stunned, but surprised and shocked.

"Didn't I say that last time, our Wucheng University of Arts and Sciences has a lithography machine experimental project. At present, the project has achieved certain results. Perhaps we can independently develop and manufacture lithography machines and other equipment."

Ding Yue said confidently.

As long as it is not a lithography machine with a 7-nanometer or a 5-nanometer-level process technology, like a lithography machine with a 28-nanometer or 14-nanometer-level process technology, Ding Yue is still very confident.

"Principal Ding, are you serious about this?"

Wang Liwu felt incredible.

This Wucheng University of Arts and Sciences is really extraordinary, even the lithography machine can be independently developed and manufactured?

"certainly."

Ding Yue replied.

"President Nading, what level of process technology is it, 32nm? But now 32nm is not very competitive in the market."

Wang Liwu asked again immediately.

The process technology of the lithography machine is closely related to the chip level. For example, a 32-nanometer-level chip requires a 32-nanometer-level process technology lithography machine to produce.

The lower the nanometer level, the higher the difficulty of both the chip production technology and the lithography machine.

At present, foreign advanced chip technology has reached the 7-nanometer level and has been widely commercialized and can also be produced and manufactured at the 5-nanometer level, and the technology is even relatively mature.

In China, taking the National Core Technology Group as an example, the current mainstream chip levels and orders are still 14-nanometer level. Although 7-nanometer level can also be produced, the number of orders is obviously lower than 14 nanometer level.

Because 14-nanometer-level chips can be applied to many fields, such as the CPU of computer mobile phones, and other electronic smart devices.

"Hahahaha, Mr. Wang, it's not a 32-nanometer process technology."

Ding Yue replied with a smile.

"That? Is it 28 nanometers?"

"Nor!"

Ding Yue didn't try to make a dumb puzzle with Mr. Wang, and said directly: "To put it straight, Mr. Wang, our lithography machine experimental project at Wucheng University of Arts and Sciences should definitely be able to develop and manufacture a lithography machine with a 14-nanometer process technology. "

"What! 14 nanometers!"

After Wang Liwu heard the words, he was shocked instantly!

Chip technology is already difficult enough. Many domestic technology companies and technology research institutions have spent years of hard work and invested a lot of money to develop their own domestic chips, such as 14 nanometers, 7 nanometers, and even Already working on 5nm-level chips.

But with the lithography machine, it is not so easy.

Because the R&D chip technology is different from the lithography machine, the lithography machine is a very compact and complex machine, and the lower the nanometer scale of the chip, the higher the precision for the lithography machine. Such high-precision mechanical technology , So far no domestic technology company can handle it.

Even national-level research institutions cannot do it.

But President Ding said that they can do it with the lithography machine experimental project of Wucheng University of Arts and Sciences.

"Principal Ding, we are old friends too, you are not interested in making a joke with me!" Wang Liwu said in disbelief.

"Mr. Wang, I also treat you as a friend, so naturally I won't know how to deal with it. To be specific, I need to have a meeting later to make sure. Should I tell you later?"

Ding Yue said with a calm smile.

"Okay, Principal Ding, then you quickly confirm, if... if it really works, it will be a great moment for our domestic lithography machine!"

Wang Liwu said very excitedly.

You should know that many of the lithography machines and etching machines of the National Core Technology Group were purchased from abroad at the beginning, but as the gringles' suppression of Xia Guo became stronger and stronger, it has led to thinking now. It's hard to get a lithography machine.

Without machinery and equipment, what would be used to produce chips?

It is precisely because of this that Xia Guo is now facing a very difficult crisis of core shortage!

"Okay, then you wait for my news."

After Ding Yue finished speaking, he hung up the phone.

Afterwards, Ding Yue returned to the conference room.

Looking at the entire conference room, Tong Yihang, Liu Tiefei, Luo Peng, Subeilin, Xu Bin, Yang Jie, Ding Xiaoyou, etc., a group of some of the most powerful figures in Wucheng University of Arts and Sciences, such as the most ace majors, have gathered here.

"Sit down, everyone, we are going to have a meeting."

After Ding Yue came to the meeting room and sat down in his seat, he said to everyone: "Every one of you here is an elite of our Wucheng University of Arts and Sciences. I have been working **** the Engraving Experiment Project, and I have seen all the hard work and hard work over the years."

Everyone is quiet.

"Okay, I'll just talk about business."

Ding Yue began to get serious and continued: “Everyone knows that our leap forward, the pre-sale of new energy vehicles in the future is very successful. Core Technology Group has only an order for 200,000 chips, but we have already pre-sold nearly one million Leap-Future new energy vehicles."

"In that case, we still have a big gap in chip demand."

Teacher Luo Peng said.

"Principal Ding, do you mean..." Tong Yihang seemed to understand what Principal Ding meant.

If there is no chip, then you need to build a chip, and if you build a chip, it will naturally require the extremely critical lithography machine.

"Yes."

Ding Yue nodded immediately, and said with a serious face: "Our school has been developing the lithography machine experimental project for so many years and has invested so much money. I think you are also very clear about which step you can achieve, right? "

"Principal Ding, let me summarize it."

As the main person in charge of the experimental project of the lithography machine and the most authoritative person, Mr. Luo Peng stood up and said.

"Sit down, sit down and say."

Ding Yue immediately motioned to Teacher Luo Peng to sit down and talk.

Luo Peng nodded slightly, and after sitting down, he said, "President Ding, we are currently working **** the lithography machine for the 5nm process technology, and the exploration of the 3nm process technology. If the 7nm process technology, we I have mastered it, but I think it is not very mature. We can already master the application technology of the 14-nanometer process technology lithography machine. I think it is not a problem."

"Very well, so to speak, can we build a 14nm process lithography machine?"

Ding Yue asked very satisfied after hearing the words.

"Yes!"

Teacher Luo Peng's answer was affirmative.

"14-nanometer-level process technology lithography machine, there is no difficulty in challenging, or 5 nanometer and 3 nanometers are more challenging, hahahaha."

At this time, Ding Xiaoyou said with a smile.

Although Ding Xiaoyou is only one of the participants in the experimental project of lithography machine, Ding Xiaoyou knows very well that his team is very strong. Everyone is a genius, conquering 5nm or even 3nm process technology. Lithography machine and chip, that will happen sooner or later.

"That's good. For our leap forward, the use of 14-nanometer-level chips for future new energy vehicles will be enough, but we are running out of time. Therefore, we need to cooperate closely with the National Core Technology Group."

Ding Yue nodded.

At this time, if you build your own factory to manufacture lithography machines and then manufacture chips, it will take a long time.

Too late.

Moreover, although the 14-nanometer chip is the mainstream chip of many electrical appliances, in a few years, the 7-nanometer chip, and even the latest 5-nanometer chip, will become the new mainstream, even abroad. Large-scale use of 7-nanometer-level chips.

For example, a fruit cell phone!

Therefore, Ding Yue does not plan to open his own 14-nanometer chip factory for the time being. This area is strongly supported by the National Core Technology Group.

If he wants to lay out the semiconductor industry, Ding Yue is ready to take the high-end route, so that he will have the strength to compete with foreign companies.

For example, Almes Group, which manufactures lithography machines very well, and Island Semiconductor Manufacturing Group, which manufactures chips very powerfully, etc.!

In addition, if you do it yourself now, the supply leap, the future of new energy vehicles is too late in time, so Ding Yue prepared a 14-nanometer-level process technology lithography machine to cooperate with the National Core Technology Group.

"I agree with that."

In the conference room, An Yujia took the lead in supporting President Ding's ideas.

"Well, this is a way."

Xu Bin also nodded and said: "We provide 14-nanometer process lithography machine technology, and Guoxin Technology Group provides manpower, material resources and even capital. In this way, domestic 14-nanometer process lithography can be quickly realized. The machine is now in production."

When you think about this matter, everyone knows that it is indeed necessary to cooperate with Guoxin Technology Group first.

Because of the lithography machine, Wucheng University of Arts and Sciences and Feiyue Group are still in the research stage, it is not that simple if they want to lay it out.

At the beginning, it took almost a year for the establishment of the graphene industry, and now the new energy automobile industry and the automobile factory have just been completed. If the 14-nanometer process lithography machine industry is established, it will take more time. At least one and a half years.

But Feiyue·Future delivery of new energy vehicles cannot wait a year or a half.

"Okay, that's the decision. We use the 14-nanometer process lithography machine technology to work closely with the National Core Technology Group. In the future, we will deploy the high-end chip field. If you are in this area, you have to start. Ready. UU reading www.uukanshu.com"

Seeing that everyone agreed, Ding Yue immediately looked at President An Yu Jiaan's instructions.

"Good Principal Ding."

Upon hearing this, An Yujia nodded immediately.

"For specific arrangements, Mr. Luo Peng, according to the specific situation, divide our team into two groups. One group is responsible for the production and manufacture of 14-nanometer process lithography machines with Guoxin Technology Group. For the other group, then Is it possible to continue to research our 5nm level and strive to make our domestic high-end chips as soon as possible. Do you think there is pressure to divide into two groups?"

Ding Yue made some arrangements, and then asked Teacher Luo Peng.

"I think the pressure is not great. After all, we have matured the manufacturing of the 14-nanometer process lithography machine. After I go back, I will make the corresponding arrangements according to the principal Ding."

Luo Peng thought for a while and replied seriously.

Because Luo Peng also felt that the two-way approach that Principal Ding said would indeed be more efficient.