Steps of rebirth

Long Jianhua threw the ball out, and he watched Chen Ai is willing to pick it up. He doesn't want to spend more mind above, and I want to put this more eighty-hundred thousand quickly.

In the island, he has some talents.

It has a rapid development of industrial so many years, and there is always a number of capable people to show.

About 100,000 years, is a very high number, and he is now estimated less than 150,000.

There is also something that can make him want to stop, it should be equity, which is equivalent to one of the bosses.

If you want to do your company, he is not necessarily enough. Now there is a ready-made boss, why not?

As for the right and financial power, which time is not the boss?

Indeed, Chen A is a bit faint, and it was shocked by Long Jianhua.

On Long Jianhua, the rest of the people away, and after a drill alone, he went to the office to see the company's list of materials, and he can't see it;

To the production workshop, I watched Long Jianhua in a job, turning it back; I checked the inventory in the warehouse, and I always have a wrong number ...

The two lathes to be modified are used to process the crude car stadown. Due to the low efficiency, only one hundred and twenty times, so that the machine is a 60-year-old worker.

At this age, the general enterprise is unwilling to recruit them, and the island at this time has no old-age benefits, so they will make a little more, and some income can be added to the house.

Even if you have already arrived at 6 o'clock in the afternoon, you will get off work, Long Jianhua wants to transform the two machines, and two workers are still very unhappy.

Two stages, ten dollars.

Chen A was ascended, and Long Jianhua told them that today's production will not be less, but will be more; let them leave here, go outside the workshop, etc., wait for the equipment to complete.

The two of them took the doubts to the door of the workshop, but they didn't leave, and immediately reached into the head.

This type of machine tool is modified, and there is a factory modification in the 1960s.

Why didn't be promoted, because a machine is not produced by the same specification. Every time you need to replace the variety, it is necessary to reform.

Fitting is not the same. Each of their machines only produces the same product, and has been specialized to meet the premise of transformation.

At 19:210, Pan Agui took Chen Adei three into the workshop, asked in the sound of the machine roared, "When can I finish it?"

Long Jianhua turned his head and loudly, "This is good, and the other is before!"

The two servo motors of this have been installed, only the debug lines and power are completed.

After thinking about it, he wants to arrange people to debug lines and power, and they will install the second.

The commissioned people need to know, and will not have a person who knows himself to see himself, and this person only has Chen Amens.

Chen Ashi has just finished debugging the first place, and Long Jianhua has been installed.

Long Jianhua asked loudly, "Pan Boss can call people to learn!"

Pan Agui recruited, screaming the two old workers who manipulated this machine.

Dragon Jianhua gave them a little time to pay attention to the key to start the lathe.

The power is turned on, the spindle is rapidly rotated, and the bridge gear is passed through the rod, the worm drive worm gear on the rod drives longitudinal cam ...

" ~"

In the harsh metal cutting, a circle dark blue iron filing is rolled up, and a crude car is quickly cut.

"Hey!"

The chaler pushes the horizontal car knife forward, the processed historical portion is cut down; the spring head is loose, the remaining material follows the iron boxes below the spring card.

The lathe continues to run automatically until the three raw materials on the feeding frame have been launched on the face of the Dragon Jianhua, and Pan Agui and the two operators are extraordinary.

Dragon Jianhua's "Pan Boss, you take it to measure it."

I will have a female worker holding a cursor card, and I measure it, "I'm qualified!"

Dragon Jianhua's Gui, "Let them operate, see how much can I work in one time?"

Pan Agui Haha smiled, "Take a look!"

Long Jianhua asked, "Who can operate this machine, do it personally."

An old worker looked at him in a glance, immediately went to the machine, take it out, gently put it on the gauge of the feed.

Then press the button, the machine starts again ...

One, two, three, four ...

The stretches continue to cut down from the card head ...

Thirty-one, 32, thirty-three ...

Every fall, Pan Da is smirked.

"Half time, forty one!" Pan Agui yelled.

You know, this old worker can produce five even if it is not stopped at all times.

According to this speed, you can complete the workload of the previous twelve time in one and a half.

Pan Weigui wants to see the limit, the old worker also wants to take the opportunity to produce some signs.

Dragon Jianhua did not manage them, calling another old worker to start another lathe that has just completed the power and line debugging.

This time, Long Jianhua no longer personally manipulates, but he is doing himself himself. He is just watching it.

" ~"

The sound of the fast-rotating sound of the spindle of the lathe sphere sounds, and after the blank rolls to the card head, the linkage device is quickly fixed to the spring card.

The two servo motors are simultaneously started, and the car knife is precise to a predetermined position, and the coolant is in the first time to cover the head of the knife.

" ~"

Blue black iron filings fly around the workpiece ...

"Hey!"

The first positor dropped the dish

"Hey!"

The second pillar dropped the tray ...

"One or eighty!"

Chen A was called his arm and found it quietly.

Pan Agui nodded, and couldn't be excited, "not only increased, noise is also a lot!"

The rest of the machine has stopped, only these two are still working, the people who control the old machine tools are around.

"These two servant streets have been sent, so much production."

"Calllaoye! This is the boss specified. Don't worry, we will change it right away." ......

At 9:30, all the remaining blanks of the workshop were completed, Pan Da Gui took Long Jianhua's shoulder haha ​​laughed, "Hua Ti, drink two cups tonight!"

Long Jianhua wipes his hand with a clean rag, "I have to eat it in the future. I have to go back to Kowloon, no bus. First give me the two money."

This is the agreement. This two money is given, and the rest will follow the contract.

There is less than 8,000 in the pocket, it is unwaver.

Pan Agang laughed, "Then I don't delay you. A Ling, give money to Hua Tiao!"

Take the shoulders of Long Jianhua go out.

He is very happy.

After such a transformation, the two machine tools have been greatly improved. The key has also reached an agreement for the transformation of other manufacturers for half a year. It is equal to how many companies that will be killed?

Think about it!

Chen A was on the back of Long Jianhua, and his eyes were full.