Super Dimensional Wizard

 Chapter 3632 Improvements

 In the next half hour, Angel witnessed the entire forging process in Moretta's workshop.

I have to say that this is the most assembly-line-like forging that Angel has ever seen.

 Material selection, material setting, defect removal, heating, purification, secondary heating, hot melting, shaping, painting, condensation, packaging...each step is completed in different compartments.

Each compartment has a corresponding person in charge, a digital assistant, and a large number of crystal puppets used to carry and handle debris.

These compartments are closed to each other, and the only thing connecting them are several suspended water channels.

 The water channel is filled with special coolant.

 After each step is completed, the crystal puppet will put the semi-finished product into the water channel and let it float down the water to the next compartment.

 Finally reach the end point - the condensation pool step by step.

 The molded embryo will enter a condensation pool mixed with several types of coolant, floating with brilliant colors and intense light.

 The embryo sinks to the bottom of the condensation tank for half an hour.

Finally, a vortex will appear at the bottom of the pool, rolling the condensed embryo into the packaging chamber below, and then pulling it up the hanging shaft to the first floor of the bubble workshop, where the crystal puppets can carry it to the nearby bubble warehouse.

 The whole process can be said to be very smooth.

Moreover, because someone is watching every step, it is almost impossible to find obvious defects.

This is probably why the effects of the embryos forged by Moretta are extremely stable.

 …

When Moretta took Angel and others to the last area of ​​the workshop, next to the condensation pool.

 After hesitation, he still asked: "What do you think of my workshop, sir?"

 Throughout the whole process, Moretta did not ask Angel for his opinion on the workshop.

It’s not that he didn’t ask. He originally thought that Angel might ask. But from beginning to end, Angel remained silent, which made him feel a little uneasy.

 The more uneasy you are, the more you will think of bad things.

 Napoli said before that Angel just randomly picked a workshop to see the progress...but was it really random?

Angere also made it clear before that he came from the Bubble Warehouse. Could it be that Angel saw the embryonic weapon he refined in the Bubble Warehouse and felt there was something wrong with it, so he chose his own workshop?

 In short, Moretta began to feel uneasy in his heart.

 After arriving at the condensation pool, Moretta finally couldn't help asking Angel a question.

On the other side, the reason why Angel remained silent was actually because he was thinking about the entire forging process and how to improve it.

 Because I don’t have an idea yet, I didn’t say anything.

Now that he heard Moretta's inquiry, Angel originally planned to say a few perfunctory words, but through super-perception, Angel noticed Moretta's inner uneasiness.

Angor thought for a while and decided to explain a few words.

“The whole process, there were almost no major problems, it was perfect.” Angel: “It can be said that this is the most streamlined forging I have ever seen so far.”

 “Assembly line?” Moretta was stunned for a moment.

Anger: “You can understand it as division of labor and joint efforts.”

"Generally speaking, there is nothing wrong with your refining. At least in my opinion, it is very good."

As Angel spoke, he stretched out his magic hand, grabbed it from the void, and grabbed a water ball from under the condensation pool.

 Inside the water polo is an embryo that is settling.

Angor carefully looked at the basically formed embryo, and said calmly: "It's a very good embryo."

After speaking, Angel threw the embryo into the condensation pool, and then continued to grab new embryos.

In just half a minute, Angel captured more than ten embryos.

Angor looked at each embryo for a few seconds before throwing it back into the condensation pool.

 Finally, Angel gave a comprehensive evaluation: “They are all qualified products and can be used as consumables for the login device.”

　　After hearing Angel’s evaluation, Moretta’s hanging heart finally dropped. However, he still had some doubts in his heart. Since there were no major problems in the entire forging process, why didn't Angel say a word before?

and…

Angor’s brows have been frowning slightly. Why is this?

Moretta is also an outspoken person. Now that he has said this, he simply asked the doubts in his heart.

Angor was silent for a moment and replied: "Although the whole process is perfect, because it is too perfect, I can't find any room for improvement for the time being."

 “Improvement?” Moretta was stunned. Did Angel come to his workshop to improve the device embryo? So, is there really something wrong with his embryo?

Angor shook his head: "There are indeed some small problems, but they are not big."

 “Can you tell me what the problem is?”

Angor didn’t hide it, and told Moretta about the low number of logins.

After finishing speaking, Angel added: "Although the number of logins for the weapon embryos coming out of your workshop is relatively low, their stability is very high, almost second only to the weapon of the mirror-wielding banshee. Embryos. And not only in this current area, but also in the entire production area, your stability can be ranked among the best."

Moretta: "Is that why you came here to see my workshop?"

Angor nodded: "The stability is very high, which means your forging level is very stable. I just want to come over and see if I can make some improvements to increase the number of logins while maintaining stability."

 “But...it seems a bit difficult at the moment.”

Moretta now understood why Angel had been silent before. He was probably thinking about how to improve things.

“Is there no way to improve it?” Moretta is not a stubborn person. As a fashion designer, he will accept various opinions to maintain his fashionable mind. Therefore, when Angel said that his embryo had some minor problems, he did not feel offended, but was eager to improve it.

Angor did not answer 'yes or no', but pondered: "I originally thought that all the utensils produced in your workshop were forged by one person."

"In this case, I can give some improvement plans from the perspective of forging."

 “But what I didn’t expect was…”

Moretta's forging workshop is a relatively mature assembly line.

Assembly lines are of course good and worth promoting, but because the level of each compartment is almost the same, Angel cannot find any major faults, resulting in a lack of improvement plans.

“If you want to achieve a leap-forward qualitative change, the entire assembly line must change.”

 In other words, the person in charge and assistants of each cubicle now need to be completely changed.

  This is unlikely.

 Because the newly recruited people must be at the top level, and their levels must be similar to each other. In the end, the number of these people will be several hundred.

 This is obviously impossible to do. Napoli's ability to assemble the current assembly line team is already the limit of what he can do.

“So, there is no way to make a leap forward qualitative change.” Angel: “The improvement plan I can give is to change some details at most.”

“For example, the heat control on the hot melt, the techniques during shaping, the coolant combination in the condensation pool...etc.”

“But these improvements may not lead to a significant increase in the number of logins.”

 According to Angel's estimate, it may have changed from a stable 750 times to 760 or 770 times?

 The increase will not exceed 50, and it is impossible to enter the high-quality or good-quality area. It is a small improvement.

“What I can give right now is this small improvement.” When Angel said this, he sighed softly: “But I feel that this small improvement is not that big...”

Before Angel could say "it's not necessary", Moretta said first: "It's necessary!"

“Although it’s just a small improvement, every small improvement can make my work better, right?”

Moretta: "I used to do the same thing in fashion design. My style tends to be complicated and simplified. But after simplifying to the extreme, it is basically difficult to improve..."

"I will visit different designers, even designers from different ethnic groups, and ask them to give me advice on my design. Even if this advice does not greatly improve my work, as long as there is improvement, I will eventually To reach the heights I strive for.”

In the same way, Moretta does not feel that small improvements are unnecessary. As long as it is an improvement, even if it is just to increase the average from 750 times to 751 times, he is willing to do it.

 The important thing is not the number of increments, but finding the problem.

 He ​​cannot find the problem himself, so he has never thought about improving it; but if others can help him find the problem, he is extremely willing to make adaptive changes.

What's more, from 750 evolutions to 760 and 770, in Moretta's view, this is not a small change.

 Go one step further and you will reach the realm of good products!

Looking at Moretta's eager eyes, Angel's hesitant expression suddenly became relieved.

 Since Moretta wants to make improvements step by step, let’s do it.

Perhaps, he can really achieve stable improvement in the future and reach the level of good or excellent products.

 …

  In the following time, Angel began to improve his teaching.

  The most important teaching areas are the hot melt area, shaping area and condensation pool.

These three places are the most important areas on the entire assembly line, and they are all headed by Moretta.

Angel has no way to improve everyone's level, so he can only start with Moretta...

Time passed slowly, Angel spoke in detail, and Moretta also studied very seriously.

About an hour later, Angel taught Moretta all the details that needed to be improved, including changes in shaping techniques and the coolant ratio in the condensation pool.

Moretta also absorbed it quickly and even planned to improve it immediately.

However, fire control and shaping techniques cannot be changed immediately, so he can only start by mixing coolant.

The new coolant ratio given by Angel does not require emptying the original condensation pool, but only needs to add new coolant into it.

Moretta found a crystal puppet and within ten minutes, he prepared the proportion of coolant in the condensation pool and readjusted it.

 Then, Moretta found Angel with two embryos.

 One of the embryos was soaked in the original condensation tank; the other embryo was soaked in the new condensation tank.

Moretta asked Angel to help test the impact of old and new condensation pools on the number of logins.

Angor himself also had this intention, so he agreed without hesitation, but...

“One control group is still too few. Let’s get a few more embryos.”

 Five minutes later, Angell recorded the number of logins for the old and new condensation pools with reference to several control groups.

 Finally, it was determined that the average number of logins to the new condensation pool increased by about 4 to 5 times compared with the old condensation pool.

  That is the difference between 750 and 755.

 The number of increases was not much, but at least it was an increase that could be seen with the naked eye. This made Moretta very happy, and she couldn't wait to learn the fire control and shaping techniques taught by Angel.

Angor was quite pleased to see Moretta's enthusiasm for learning, so he made a request to leave.

 Because if they didn't leave, Moretta would definitely stay with them, wasting their time and enthusiasm for studying.

 So, it’s a good time to leave now.

Moreover, it has been more than two hours now, and there is still no news from Naples. Angel is also curious whether there is any big problem in the workshop of the Mirror-wielding Banshee, and wants to go and have a look.

Seeing that Angel insisted on leaving, Moretta did not try to stay. He just begged Angel to tell him if he found out more problems later.

Angor naturally agreed wholeheartedly, and then under the guidance of Moretta, they returned to the surface.

 Farewell to Moretta, Angel and Laplace looked at each other and walked out of the Bubble Workshop.

 When they returned to the outside world, they found that the space around them seemed to be significantly wider... Was it because there were fewer bubbles?

Angor observed it carefully and finally made a decision.

 The density of the bubble has not changed, what has changed is...the crystal puppet.

When they came to this area before, there were a large number of crystal puppets flying in the airway. Whether they were carrying supplies to major bubble workshops, or transporting embryos from bubble workshops to warehouses, these were the activities of crystal puppets. .

Hence, crystal golems are spread across the sky.

 But at this time, no crystal puppet left the bubble workshop... This is obviously a problem.

Moreover, Angel noticed that only their bubble area had no crystal puppets. In other areas, the crystal puppets were not abnormal.

 It can be seen that the crystal puppets in their area are controlled by others.

There are currently only two people who can control the crystal puppets in an area: either Napoli, or Elder Kongta, the person in charge of the crystal puppet data in this area.

Just when Angel was guessing who controlled the crystal puppet, Laplace suddenly said: "I seem to know where the crystal puppet has gone..."

Angel looked at Laplace in confusion.

However, he found that Laplace was looking in the direction behind him. Angel immediately followed her gaze and turned around.

 In the first few seconds, Angel didn’t see anything unusual. But after observing carefully for a few seconds, he finally noticed something was wrong. He saw a huge black circle...

 (End of this chapter)