Super manufacturing empire

In the Zhongda Mould Industrial Park, Yunkai’s newly established Xingmeng Precision Machinery Manufacturing Company, several long-distance trucks are neatly parked on the wide logistics passage outside the plant, and a ten-ton crane is just transporting these. The equipment is moved down from the truck compartment.

Seeing that the professional porters quickly placed the equipment on these large trucks and accurately placed them on the anchor bolt holes that cost 120 yuan each, Yunkai nodded with satisfaction.

"Yes, there is no way to trust you!" Yun Kai absolutely praised Huang Kui for his efficiency.

"Brother, I'm satisfied now! For you, I have offended several customers. Except for this 40 CNC car, everything else was intercepted from other customers..." Huang Kui's face There is not much smile.

The total value of these equipment of Yunkai exceeds 1.4 million, and his profit is not less than 100,000, which can be regarded as a small fortune, but he really can't get higher.

The two Youjia’s three-axis CNC machining centers were intercepted from two customers. The manufacturers have stocks of the conventional 40 simple CNC lathes, but the two 50 CNC lathes are also from the other two customers. Intercepted in the hand.

Coupled with the 61125 heavy-duty sleeper that was in place on Saturday and has now been installed and debugged and ready for operation, Huang Kui has offended many customers at once.

On the surface, this is just grabbing equipment from five customers, but in reality, there are far more than five.The production cycle of these equipment is relatively long, especially the processing center, which can not be intercepted by Yunkai now. Now the order is placed and waited a few months before handing it over to the customer!

If each customer's delivery is delayed by one month, it will offend at least six customers...

These are just two machining centers...

"Where do you complain? Don't you do anything like this? Customers who only sell one or two devices have no human rights. Am I not sure? Anyway, I can be considered a big customer for you! "Yun Kai ignored Huang Kui.

"People are not like you. Tell yourself what you are doing. The four-axis machining center with a simple worktable driven by pmc control module, but I got it from a friend from the Pearl River Delta. , The delivery date is still half a month away..." Huang Kui really didn't know that Yun Kai had a clear understanding of their doors.

"What's the big deal about this? All you pay is to buy him a meal, drink a little, and then take him out to do something. How much did it cost?" Yun Kai bit the secretary especially weight.

A man can understand what to do.

Such things are too common these days.

"Oh, yes, I know you, I'm bad for eight years. By the way, brother, I heard that Wu Feng and his wife in the Longguang factory are getting divorced. They plan to dispose of the equipment. Do you have any ideas?" Huang Kui also knew that there was no use entangled with Yun Kai any longer, and he simply changed the subject.

"Longguang Factory is selling equipment? When did it happen?" Yun Kai frowned.

In the past few days, I have not been busy tracking the processing progress of the tooling, or busy lay hands on Zhao Ling, as a porter, and by the way, I have to contact the electrician of the step line, the professional worker who drills the anchor bolt installation hole, etc. There is no such thing. Time to understand the situation of Logan Factory.

"In the news from the previous two days, Wu Feng called me and asked me to help deal with the equipment in his factory..." Huang Kui whispered.

Even if it is a new device that came back today and enters the second-hand market, the price will drop by a large margin.

Isn't Yunkai just in need of imported machining centers and precision inclined bed CNC lathes?

"His wife agrees?" Between these two people, who can be the master, Yun Kai is a little confused now.

"I don't know yet, take a moment, and then ask again in a few days!" Huang Kui smiled wickedly.

"Indeed, the more they bother with each other, the better, just to keep the price down. I don't want their two inclined bed CNC lathes, but I want the Mazak machining center!" Yun Kai sighed.

I’ve known it a long time ago and ordered these new equipment slowly. Most of the CNC equipment at Logan Factory was only bought in the last one or two years, and after the equipment’s running-in period, it is now the most stable period of operation. The machining accuracy is very stable.

Especially, Wu Feng's divorce is the easiest way to keep prices down.

"Not interested in the others?" Huang Kui was anxious that Yun Kai swallowed all the equipment of Wufeng Longguang Factory at once.

"Nima, why didn't you ask me if I was interested when these devices hadn't shipped when you got the news?" Yun Kai gave Huang Kui a white look.

Upon hearing Yun Kai's words, Huang Kui smiled wryly and didn't speak any more.

No one knows the performance of the equipment at Wufeng Longguang Factory better than Yunkai.Moreover, the price of these equipment will be much cheaper than buying new equipment. Huang Kui is worried that Yunkai will not want the equipment he ordered when he knows that the equipment in Wufeng factory is going to be sold...

"Master, when the number of cars is leveled, you can find within two guides. Anyway, these things can't do any super-precision work..." In order to install these equipment as soon as possible, Yunkai also brought the master Guo Guichuan. Now, six CNC lathes, two machining centers, together with the installers from two manufacturers provided by Huang Kui, completed the first leveling in just over an hour.

During the installation of machining equipment, since the ground is absolutely impossible to level, the guide rails of the equipment must be leveled with a spirit level, otherwise the machining accuracy will be affected during the machining process.

Generally, before using concrete to fix the equipment, you need to find the guide rail plane of the equipment (the plane formed by the two moving directions of the equipment x/y) within 0.05mm.Then pour the concrete fixtures and wait until the concrete is dry before leveling it a second time.

The second leveling needs to reach a certain level according to the accuracy of the equipment and the range of products added.It is impossible to reach the absolute level, so many masters will strive to find a position that is infinitely close to the correct level when leveling the equipment.

This is the second leveling. If you follow the leveling method of the master, you may not be able to adjust all these equipment in one day.

"Two guides are enough? Are all these counting cars of your baby used for rough processing?" Hearing Yun Kai's words, the master frowned.

"That's not the case. The precision requirements are all small parts..." Yun Kai said nonchalantly.

Two guides are completely enough for most jobs!

Even many devices themselves cannot achieve this level of accuracy.

For domestic equipment, 0.005mm is just a theoretical data.

"Your baby has a bad attitude! If you don't adjust him now, and wait a few days until the concrete is completely dry, how do you adjust? You are preparing to do precision work again. Isn't this breaking your own job?" The master was very angry at Yun Kai's words.

This kid, the more he engages, the more he goes back.

Didn't this lose his face as a special engineer inside the aerospace system!

"Uh..." Yun Kai couldn't refute the master's comments.

"Master, this is a difference of one or two leads, and it doesn't have much impact on machining accuracy, right?" Peng Zhi on one side had never learned these things in school.

"What did your master tell you?" Guo Guichuan stared at Yun Kai dissatisfied.

This is not a typical mischief!

"How can it be, I thought it myself..." Peng Zhi had heard that this master used to use the wrench in his hand to beat the master.Fortunately, their master did not develop such a problem.

But he knew that if he let the master be knocked at this moment, his good days would be gone.

"Baby, on the surface, there is only a difference between one and two leads, and the error is not big, but our lathe is a rotating equipment, and these errors have to be magnified twice. Think about it, how much error will this have? When making parts, these errors are manifested in the flatness of the end face of the part. The level of this equipment is two-leads. Theoretically speaking, the flatness of 400 diameters will have at least two-lead errors; the parallelism is at least four-leads Error..." Guo Guichuan taught the young apprentice who had just walked out of the technical school a vivid lesson.

"What will be affected by the machining of shaft parts?" Peng Zhi made Yun Kai admire, and it was not unreasonable to keep him among the many apprentices.

"Straightness, shaft parts rotate around the axis line during processing. Have you learned this in school? When the entire axis line is offset, does the axis line move towards Lean over there, and the depth of the knife over there will be more? After the processing is completed, it will become a very small taper..." Guo Guichuan slowly adjusted the level of the equipment, while facing this with the willingness of Yunkai back then The eager young man spoke carefully.

Now, there are not many young people willing to study hard.

The entire industry has already begun to fault.

Now that the master had taught himself a lesson, Yun Kai didn't dare to mess around anymore. He knew that the master would definitely check the equipment he adjusted in a while, so he could only level the rails slowly and honestly.

If it weren't for the master to take him seriously, he wouldn't care about it at all.

In Yunkai's plan, things that could be done in one or two hours, it took more than seven hours to do it, which made Yunkai very painful.

As a result, the wiring task originally planned to be completed this afternoon can only be waited until tomorrow morning.

This has no effect, and production will not start tomorrow anyway.

Hu Cheng and Feng Wen helped Zhou Xingquan, and it took at least a week to finish the work. Chen Fei helped Tang Hui process his own tooling, and it was almost finished tomorrow.

Now, just waiting for the bastards who signed the contract with Zhao Ling to ship the rough tungsten parts.

Thank you for your great reward, ︿︿.