Super manufacturing empire

The first month was paid, Li Shufen did not ask for the processing fee and was in arrears with Yun Kai's salary...

Yun Kai didn't say anything.After all, back then, my second sister’s nephew became seriously ill. The parents who worked outside the home and the eldest brother-in-law whose eldest sister had been away for 18 years without any news all went bankrupt and owed a lot of debts to make up for the surgery.

In the end, the little nephew did not succeed in surgery and left the world.

The 6,000 yuan Wu Feng lent to Yun Kai was not borrowed by anyone in the entire family. Yun Kai brazenly went to the bosses who worked part-time during his schooling to borrow money, and people gave him the most charity. Two hundred, that means Wu Feng lent Yun Kai the processing fee he had finally gotten back despite his wife's objections, so that the entire operation cost was enough!

Although his nephew eventually disappeared, Yun Kai worked hard to work part-time and soon returned Wu Feng. This favor was actually owed.

In the first year, Li Shufen not only refused to raise her wages, but also owed her wages, did not pay overtime, and did not pay for the New Year, not to mention the usual festival fees or in-kind benefits, Yunkai did everything. did not say.

These, just as the favors of Wu Feng when he lent money to him back then!

In the second year, the situation remained the same, and Yun Kai had begun to have various dissatisfaction.

It is impossible for anyone to be regarded as a fool forever and always suffer.What's more, Yunkai is a master who has rich experience and can operate all kinds of ordinary or numerical control equipment of common types of work!

Li Shufen drew a huge pie for Yunkai-when the company's scale develops and grows, after the equipment is added, a part of Yunkai’s dry shares will be distributed. If Yunkai can put a part of the money into the equipment, he You can even become a shareholder of the company!

Hearing such words, Yun Kai felt like he was beaten up when he was working.Among the tens of thousands of small companies like this in Chengdu, most of them are shareholding systems, and many masters have become company bosses in this way.

With this hope, Yun Kai worked hard all day long. In many cases, he even went to the workshop directly to find a place, lay down a slightly clean wooden board and clothes to sleep, and then started to work again when he woke up.

One person is in charge of many tasks in the office and workshop. After the worker asks for leave or resigns, he even regards himself as the most ordinary operator, and he drives several numerical control equipment by himself.The hard work is to get the company’s dividend shares or some shares.

Even if it was five percent, he was willing.

Until Yunkai entered Longguang's third year, Wu Feng's workshop grew, with an annual profit of more than three million yuan, and Li Shufen did not fulfill her promise to him.

Yun Kai now understands that Li Shufen drew a cake for him!

How can he not complain?

"Is it interesting to mention this now? It is estimated that you have the thickest skin in Rongcheng! Last year, I worked more than 2,000 hours of overtime in a year, and you gave out 1,200 yuan for the Chinese New Year. Are you special? I am so embarrassed to talk about the year-end awards? I am not afraid of making people laugh out loud! Honestly give me this year's overtime pay, so we can get together and spend time, otherwise, don't care about me and someone who is unkind! "After Yun Kai finished speaking, he left Li Shufen's office without looking back!

If it was Wu Feng, Yun Kai would leave without saying a word.

He admitted.

But for Li Shufen, he is not so polite.

What he owes is Wu Feng's love, not Li Shufen!

"Yun Kai, do you really think of yourself as a character? You are scared when you are an old lady? I have to see how you are disregarded!" Yun Kai usually looks like a little sheep in front of him Generally docile young people dare to threaten themselves!

He said he was dead!

He is the rhythm of death!

The elder brother who brought him up since childhood has never asked himself for anything. Now he asks himself to arrange a job for his nephew. Can she refuse?

Besides, in the eyes of Li Shufen, his nephew Li Wei is no worse than the technical school student who has not even gone to college before and only has a technical secondary school diploma!

Without him, his factory would be paralyzed?

With so many factories of their size in Rongcheng, she hadn't heard of anyone whose factory collapsed because one person left!

In a small factory of Longguang's scale, there is no need to go through any formalities at all when resigning. You only need to return the various tools that you have received to the warehouse management staff, and then you can leave.

Simple, isn't it?

Don't be surprised, why the resignation here is so simple, even as simple as the resignation report does not need to be written.In such a small factory, even the employment contract does not need to be signed. Where else do I need to write a resignation application when I resign?

Small-scale companies are operating by verbal agreements. In addition to the most basic accidental injury insurance (an annual premium of 100 soft sister coins, the amount of insurance seems to be 20,000), pension insurance and medical insurance, all employees are There is no.Of course, don't even count on provident funds and other benefits that only state-owned enterprises and foreign capital have.

"Master, did you really leave like this?" Hu Cheng was very hesitant about Yun Kai's departure.

Yun Kai smiled and nodded: "What else can I do if I don't leave? I've been driven away, so I still keep it stubbornly? Xiao Hu, do it well! I'm leaving, and I have to rely on you to support it. It's over."

The main business of Logan is lathe processing. The machining center is only for supporting the lathe. As for the fitter, the fitter of Logan is basically for the supporting work types. Most of the time is spent on tapping, deburring and surface polishing. Whether it is aerospace or military products of the 132 factory, various structural parts are connected with non-standard or standard threaded fasteners.

Of course, welding is definitely indispensable.Military products are far more stringent than civilian products, and the inspection standards of military products units far exceed those of civilian products.Chinese civilian products, as long as they can be used, even if they are too bad, can be accepted with concessions.And military products are absolutely not allowed. Of course, the relationship between the two parties is good, and military units can actually make concessions to accept some non-critical products in non-critical parts.

"What are you going to do now? After knowing that you were driven away, Zhou Gong of Hongfu Precision Machinery said at the time that he asked you to go to work with them. Didn't Zhou Gong call you?" Zhao Ling was very sad when her sweetheart resigned. .

He hasn't become the wife of the Yun family yet!

"Zhou Gong called me more than once, but I told him that I need to rest for a while!" Yun Kai picked up the wine in his glass and clinked with Hu Cheng.

"Master, where are you going, take all of our brothers! Although our technology is not very good, there is still no problem with doing computer operations and simple programming under your hands. Brothers. Over the years, I have worked in many factories, so you will teach us without reservation..." The two monitors of the turning team, Feng Wen and Chen Fei, are one of the few proficients of Longguang besides Yun Kai. Both of them are less than twenty-five years old.

Especially Chen Fei, besides Yunkai, is the oldest on-site employee of Logan Factory.The first-hand technique was taught by Yunkai.

Before entering Longguang, he didn't even know how to calculate the linear velocity of the parts. Before, he could only do some of the simplest machine operations, and could compile some simple machining programs for turning parts.

Before entering Yunguang Factory, he worked in this industry for six years!Always quit because you can't learn technology!Many small factories have the support of masters like Yun Kai, and the recruited workers are not problematic as long as they are not affected by disability.

A simple machine operator, work only needs to clamp the workpiece, then press the green start button, wait for the CNC equipment to process the part, remove the processed workpiece, and install one more on it.Then repeat this mechanical action day after day.

Generally, the masters in the factory have to be responsible for the debugging of many equipment every day, which requires them to compile the program, prepare the various tools and inspections that need to be used before the processing of the equipment to be debugged is completed. Measuring tools.Wait until the previous product processing is completed, and then complete the debugging of the processing program in a very short time.

Such masters are extremely busy.

They simply don’t have time to explain to the machine-operating workers why they should develop such a production process and arrange such production toolpaths (the arrangement of toolpaths during parts processing is very important. In mass processing, the knife The design of the road is directly related to the production efficiency of the entire product. It is necessary to choose such tools (different processing materials require tools of different materials, even if the tools of the same material, because of the blade angle, blade width, chip groove width and other issues , The surface quality of the processed parts are different).

There is also the choice of the most important three elements of cutting.

The three elements of cutting must be selected reasonably according to the different sizes and materials of the products produced, otherwise not only the quality can not be guaranteed, but also the production efficiency cannot be improved.(The old book "Intelligent Industrial Empire" has a detailed description)

It is impossible to learn how to choose these crucial parameters and various machining tools or even clamping methods. No matter how talented people are, it is impossible to develop a superb technique.

This is the importance of masters in the machining industry.

Many things are actually just separated by a thin layer of window paper. Someone mentions it a little, and it can be pierced in an instant. If no one mentions it, it will take at least a few years to get an epiphany by chance.

Yunkai is very grateful for the support of these brothers.

Although Li Shufen was threatened when he left, at this time, if everyone in the Longguang Factory who was barely able to get it was taken away, Longguang would be completely finished.

Whether it is aerospace or 132, these military factories have very strict assessments for supporting factories.Once the loss of all skilled workers in the supporting factory is detected, the supplier's orders will be immediately reduced.

The Longguang Factory makes some more complicated aerospace structural parts, which have higher requirements for workers!

It is precisely because of this that many factory masters are reluctant to teach workers. Once workers have mastered the skills, they will have no cards to negotiate with their bosses.If only oneself is in control and left alone, there is a high chance of taking these businesses away. This is the confidence to negotiate various conditions with the new owner.

As a result, those young people who are actively involved in this industry are sad.

Entering these processing plants that are the main production force in the entire Chengdu area, you can't learn anything at all.

Ask for recommendation tickets, ask for collection!

The contract for this book has been sent out. It is estimated that the status will be changed today or next week, so please don't worry about it.The pit product of the gourd can be fully guaranteed.

It was originally planned that when there is no change status and no website recommendation, only one update per day.However, it has been added every day for these two days.

Tianhai Xiangyun continued to reward him greatly, making the gourd even more embarrassed.

Today, decisively adds one more to Tianhai Xiangyun!

As long as the brothers recommend and collect them, Hulu's books will be able to rush to the top of the new book list, so that more brothers can see that Hulu is updated on the top, and there will be no ambiguity.

The update of the old book "Intelligent Industrial Empire" is proof.Hulu dare not say that it can guarantee continuous updates, there are old and small, many accidents are uncontrollable, but as long as the change is broken, the gourd will compensate everyone in the shortest time.