Super military empire

Regardless of whether Liu Yijiu's objection is, it is not clear where the station is.

Even if they are not discussed on the Standing Committee, they must be discussed in the Military Commission.Liu Yijiu put forward his opinion, the old man accepted it, and will not put it into actual action until the Military Commission discusses and approves it.

Most places in Daba Mountain are high in mountains and dense forests. Many places inside are sparsely populated, and it is not easy to be spotted by U.S. reconnaissance satellites.

This is the reason why the main structure of the third-line construction is selected in this mountain.

In the final decision, Liu Yijiu didn't bother to pay attention to where the troops that will be the development and exploration of the Chinese army should be stationed. Even in Daba Mountain, it has nothing to do with him.When he left, the sky outside was already bright.

On this early winter morning without haze, Liu Yijiu refused the opportunity to have a meal with the top Chinese leader, and left a certain courtyard house in Nanhai with a convulsive face.Li Rui was asleep in the car outside, wrapped in a thick military coat.

"Let's go back to Chengdu today and be with the Soviets." Liu Yijiu just said such a sentence, and then asked the driver to drive them back to the guest house.

The Soviets were going to visit their CNC machine tool factory in Chengdu to determine whether to cooperate with them.

Regarding this, Liu Yijiu does not think there is anything worth keeping secret.

The Soviets' urgent need for CNC machine tools is an opportunity for China's machinery manufacturing industry.

For ordinary machine tools, the Soviets have surpassed the entire world, but in terms of CNC, they are the most backward in the world.This may be to blame Khrushchev, perhaps it is also the character and national habits of the Soviets.

CNC machine tools are sophisticated, not in a rough style.

Regarding Liu Yijiu's ability to arrange a visit to Rongcheng the next day, the Soviets changed their way along the way to inquire about Liu Yijiu's negotiations with the Americans.Liu Yijiu cleverly avoided it.

This time, thanks to the blessing of the Soviets, Liu Yijiu did not take a military transport plane anymore, but the boss above allocated a special trident plane to send them to Chengdu.When he arrived in Rongcheng, at ten o'clock, Liu Yijiu took the Soviets straight to the Hongshan Machinery Factory in the western suburbs of Rongcheng.

Hongshan Machinery Factory, originally called Qianjiang Machinery when it belonged to the Ninth Institute, mainly produced small mechanical equipment such as ordinary bench drilling machines and tapping machines. Even large radial drills could not be produced.According to the tradition of the Ninth Academy, perhaps the tradition of Chinese military industry, the name of any key unit will begin with a red letter.Liu Yijiu did not oppose this system in the slightest.

Before the Ninth Institute took over, the production of such an uncompetitive enterprise in the planned economy era was not very moist. The national reform, the first batch of such factories with repeated production capacity and rotten streets were abolished. .

After the Ninth Institute took over, it transferred most of the skilled workers from the equipment departments of its more than ten machinery factories to this factory, and transferred a group of skilled workers from the 541 base to enrich their strength and establish a complete mechanical equipment. Production plant.

Now, the entire factory has nearly two thousand people. The production capacity of machinery and equipment in the three districts is gradually shifting to this side. Ordinary small lathes, milling machines, and radial drills can be produced here, and more importantly, the main Production equipment-CNC lathes and CNC machining centers.

In the whole country, it can be regarded as a relatively large-scale specialized machinery factory.

The three areas in the base are still research-oriented, with production as a supplement, and the main production equipment in the base is placed here.

After the steel from Panzhihua Iron and Steel is cast into the required large castings in the workshop there, and after simple rough machining, it will be transported to the Hongshan Machinery Plant in Rongcheng, and finally a series of follow-ups such as heat treatment and precision machining are performed here. Craft.

For Liu Yijiu, a tycoon who rarely appeared in Hongshan Machinery Factory, brought the Soviets to inspect this time, the management of Hongshan Machinery Factory paid great attention.

Luo Yuanxiang and Zhao Mingshan, who were transferred from the three districts to be the factory directors, waited at the factory gate early with a large group of people.

Originally, they were going to meet Liu Yijiu at the airport, but the time was too late. What's more, the young Director Liu didn't like to be too busy.

However, when Liu Yijiu and others got out of the car and saw the tall, tall, high-nosed and blue-eyed foreigners following him, they were shocked to see a huge wave in their chests. This is a top-level confidential unit. The most important CNC machine tool in the country's military industry system is produced. How could Director Liu bring these foreigners somehow?

"Lao Luo, Lao Zhao, this is a customer from the Soviet Union. All the production workshops of our Hongshan Machinery Factory are open to them..." Liu Yijiu could see their doubts from the seriousness of the two, but they couldn't. To explain here, I can only command with a straight face.

"welcome……"

The two were not regarded as leading cadres born and raised in the Ninth Academy, but as external transfer cadres who entered the Ninth Academy at about the same time as Liu Yijiu.

It is impossible for Liu Yijiu to climb up at the speed of a rocket in the Ninth Academy in the past few years without thinking.But they couldn't help it. The gang of old people in the Ninth Hospital supported Liu Yijiu, and they couldn't.

Fortunately, at the end of Liu Yijiu's suggestion, the base transferred them to Rongcheng as the person in charge of Hongshan Machinery, and escaped from the jail life in the mountains.

The least offended is Liu Yijiu.

Like other newly built workshops under the Ninth Institute, the workshops of Hongshan Machinery Factory are also of light steel structure, which is very different from the original Soviet-style workshops. This alone shocked the Soviets.China's domestic reforms and development seem to far exceed the imagination of the entire Soviet Union.

"This is our newly built light steel structure factory building. The main structure is supported by I-shaped steel, and then supplemented by other lighter materials. The top is covered with colored steel. The appearance is beautiful and the construction progress is fast..." Liu Yijiu confronted The Soviets introduced these factories.

"This is our machining workshop. Due to the transportation problem of large equipment, the current production capacity is not very sufficient. Large rail grinders are from Ukraine, heavy boring and milling machines are from Romania..." Many of these equipment are from the Soviet Union in the 1960s. imported.

Liu Yijiu didn't mind telling the Soviets.

It is exciting to use Soviet equipment to process new equipment and then sell it to the Soviets.

The cleanliness of the workshop made the Soviets' mouths wide open.

China’s industrial foundation is inherited from the Soviet Union, and everything in corporate management and technology comes from the Soviet Union.But now, in the huge production workshop, all kinds of equipment are neatly arranged, and all kinds of processing and transfer parts are neatly arranged, giving people a refreshing and pleasing feeling.

Inside the Soviet factory, there was complete chaos.

Other factories in China are the same as in the Soviet Union. The equipment may be placed neatly, but the area next to the equipment, the placement of various tools and workpieces, is not so neat.In the eyes of the Soviets, it is a matter to organize these environments that are not related to production. It is a matter that greatly affects production efficiency. After all, under special machine production, all the skilled workers need to do work is work, and handling is the work of porters. !

"Numerical control machine tools are no different from ordinary machine tools, especially in mechanical processing. The only difference is that they require electronic control systems and servo drive systems..." When I visited the neat and clean machining workshop, I went to the assembly workshop. .

Rows of main components of the machine tool are assembled to different degrees in different positions.

The assembly line assembly with the flow of people is used here instead of the assembly line assembly with the flow of products like other assembly lines.

"The control system is in Chinese. Everything is independently developed by China, including the chip. At this point, we don’t have to worry about being sanctioned by Western forces led by the Americans. These CNC lathes are mainly used for processing. Large quantities of small products, of course, complex shapes and high precision rotary parts are also processed by these CNC lathes. What we have seen before is just a simple CNC lathe for processing large quantities of parts, which can process rotary Parts with a diameter of under 800 mm..." The Soviets were obviously not interested in the first CNC lathe assembly shop.

Liu Yijiu took them into another workshop.

Just seeing the situation in the workshop, the eyes of the Soviets lit up.

CNC machining center!

In the entire huge workshop, hundreds of CNC machining centers that have been formed and not yet formed are neatly placed!

Most of the shells are not installed, and even the CNC machine tools near the door are running automatically without the operation of workers. The z-axis where the spindle is located is moving up and down at different speeds. When the worktable is moving on the z-axis , Is running fast, front and back.Next to these confidently moving CNC machine tools, there is a one-meter-high control cabinet with densely packed buttons, and at the top position, on a display screen that is not much larger than a palm, lines of programs are constantly flashing With...

This is the program verification after the CNC machine tool is assembled. It is necessary to check the operation problems of each component before leaving the factory to ensure that there will be no major mechanical failures after leaving the factory.

But just these verified running-in CNC machine tools made the Soviets understand that the Chinese were not bragging to them.

"These machining centers can process parts with a length of 1.8 meters, a width of one meter, and a thickness of 800 millimeters with the maximum stroke..." Liu Yijiu did not introduce these CNC machine tools in detail.

The Soviets were very aware of these things.

Otherwise, they will not have such an urgent demand for CNC machine tools.