Super military empire

And in a place less than 500 meters behind Lei Keming, a face was covered by thick oil paint, and the whole person was also hidden by a camouflage net that blended with the environment. He sniped in a bush. The hand was calmly pulling the bolt of the svd sniper rifle in his hand that was transformed into a manual svd sniper rifle out of the shell, and continued to shoot in the direction of Recmin.

At the moment when Reikming's buttocks touched the ground, he held the gun with one hand and propped the other on the ground. The whole person was like a spring installed under his butt, and his body moved towards the back of the tree in a twisted posture.

"Two snipers!" The two snipers identified on the other side are all in this direction!

Just after hiding behind the tree, another bullet flew past the tree. As long as he slowed down for even 0.1 seconds, it is estimated that Lei Keming would have to explain here.

The fiery pain on the scalp made Lei Keming more and more calm.

"Three o'clock!" Er Kui's voice came from the headset.

Lei Keming immediately set up the sniper rifle in his hand against the tree trunk, bit his lower lip with his upper teeth, and searched for the distance.

In the forest environment, the role of the sniper rifle is greatly restricted, and there are obstructions everywhere. However, the fact is that because there are too many obstructions, the sniper loses his duty and gives up the opportunity to snipe the opponent.

When he saw the target in the bushes in the distance that was almost integrated with the environment and would be missed if he didn't pay attention to it, Reikming smiled coldly, sticking out his tongue to feel the wind, and then in his mind Silently calculated the distance between the two sides, and finally, aimed at the target, squeezed the trigger heavily, and then proceeded to the top of the mountain bag without looking.

A headshot!

The war is still going on, but the gunfire has become much thinner.

"Inform the Soviets, to trade this afternoon, I don't want to wait until tomorrow, and I don't want to wait until dark..." After knowing that the gunshots on both sides of the special operations battlefields were gradually decreasing, Liu Yijiu made this Decided.

The Soviets should also be aware of the situation here.

Liege didn't know at all. The KGB people wanted to kill Liu Yijiu to stop the transaction. It was even more unclear. The top leaders of the Soviet Communist Party felt a very serious threat to people like Liu Yijiu in the CCP.They don't want to see the rise of China.

The world is only this big, and China must not be allowed to rise, even if they have irreconcilable contradictions with Europe and the United States.

In any case, the Soviet Union is all white people, while China is a yellow race.

"Exchange!" After knowing Liu Yijiu's request to advance the transaction, Liege thought about it and nodded.

The special forces should have failed!

Immediately under the protection of security personnel, he headed for the port on the border between China and the Soviet Union.

Liu Yijiu, Johnson and others also went to the border port. This port was once impassable. In recent years, the secret trade with the Soviet Union has increased, and the transactions between the two sides have also become intensive.

There was no bridge on the not-so-wide Heilongjiang. With the support of the engineers from both sides, they each built a wharf that can accommodate cargo ships of not small tonnage. Both sides control half of the river area. It was filled with movable fortifications.

Liu Yijiu couldn't help but be a little surprised when he saw this situation.

This area of ​​Fuyuan has changed a lot from the last time he arrived here. There was no trade port. The railway network in the northeast was not connected to the Soviet Siberian Railway in this area. Under the construction of the engineers on both sides, it has become this look.

"Xiao Liu, you can't go there! In case they..." Johnson has always been worried, his own safety and Liu Yijiu's safety are very important.

Liu Yijiu shook his head without saying anything, and stepped directly on the ferry on his side.

Several security personnel wearing black security uniforms were by his side. All of them were much taller than Liu Yijiu.Surrounding Liu Yijiu, even if the sniper was outside, he might not be able to find a chance to shoot.

The same goes for Liege.

The two ships met above the center of Heilongjiang and then docked together.

"General, everything you want is ready, what do we want?" Liu Yijiu pointed to the containers with thick camouflage nets piled up on the dock behind him.

"Is it ready? It depends on whether you have everything ready." Liege grinned, but his heart became cold. The special forces plan didn't seem to be successful, and Liu Yijiu seemed to be totally unclear about this, or Did not say at all."This time the transaction is really important, so we need to check it out first."

"Of course, it's just that you have counted, how can we be sure that what we want is ready?"

Liu Yijiu is not a fool either.

The mobilization of troops on the opposite side is clear here.

"Your opposing troops are mobilized, aren't they planning to grab these things?"

"How is it possible! Our troops are mobilized in order to implement the agreement between our two sides. Our troops will be withdrawn via the Siberian Railway..." Liege was stunned. "This is just the beginning of the transaction. Japan has lost The five-axis machining center, if your side breaks again, we will lose more..."

Liu Yijiu didn't say a word, and Liege took a group of people on the Chinese ferry and came towards the dock on the Chinese side.

The boxes containing six five-axis machining centers are neatly arranged in a row on the dock. There are many fortifications outside. Various high-performance chips for the Soviet Union are also tightly guarded in the surrounding area. stand up.

The people Liege took with him began to check and count them with the assistance of Chinese personnel.

When it was learned that the number in it was exactly the same as that on the list, when Liu Yijiu was about to let people follow the past to check the things that the Soviet Union was about to trade, Leonid stopped him.

"Liu, although we have cooperated many times, the five-axis machining center this time is different from other processing equipment. Without checking the performance, we cannot guarantee that your five-axis CNC machining centers will be what we need. ......" Leonid's words made Liege frowned.

He turned his head and looked at the head of the KGB, who didn't make contact with his eyes at all.

"This is no problem. After all, the five-axis machining center is nothing else! What's more, the exchange is Figure-22m. For business, it is a question of integrity. The reason why these machining centers do not support wood on the spindle to fix the position, we Just to show your performance before the transaction..." Liu Yijiu smiled.

The spindle is inherently heavier, and these boxes have just been able to fit the five-axis machining center. The bumps along the way will definitely have a great impact on the performance of the five-axis machining center.

Neither side of the transaction will honestly give the best things to the opponent.

Under the command of Liu Yijiu, the technicians on the Chinese side were directly asked to disassemble the rectangular box on the outer packing box of the machining center, and at the same time, the 98 division stationed here found a generator and a voltage stabilizer. , The necessary equipment for the machining center, such as the air compressor, immediately generated electricity on the site and connected the machining center inside.

When the power is turned on, the technician enters a series of programs into the operating system. After all the things are done, the sky has begun to dim.

"Strengthen the surrounding area and don't let their people touch in..." Li Xiangyang did not show up at the place of the transaction, Liu Yijiu, Liege, Johnson and others were always on the dock.

The other party is obviously dragging time.

And Liu Yijiu's special forces have not returned yet.

"Chief, it's ready, are you going for a trial run?" The operating technician asked Liu Yijiu after finishing the preparation work.

"Start the dry run!" Liu Yijiu looked at the surrounding sky and nodded.

"Call..." After the technician checked the program and the settings on the machine again, and pressed the green start button of the control system, the machine tool was originally stationary, and the spindle quickly moved downwards. At the same time, the worktable was also facing horizontally. And longitudinal movement, fast movement, even with hydraulic pressure to reduce weight, the slight friction sound of the machine tool guide pair and the friction sound of the ball and the screw on the ball screw are very clearly transmitted in the deafening sound of the generator. come out.

When the moving parts of the machine tool are moving rapidly, the sound of ", , " also started in the tool magazine. This is to prepare for tool change, and move the tool that is to be changed to the spindle to the tool change position.

When the spindle descends to a long distance from the worktable, the spindle stops moving.

At the same time, the tool holders in the tool magazine began to move slowly downwards from the original position parallel to the worktable until they were parallel to the spindle.

The tool change manipulator, originally parallel to the y direction of the machine tool spindle, quickly rotates 90° under the hydraulic drive. The semicircular jaws on both sides of the manipulator just stop at the position of the spindle and the tool magazine, and are caught on the slot of the tool holder. Then he heard a sudden "bang", the manipulator began to quickly fall downward under the hydraulic pressure, and then when it reached the position, it rotated 180° again, and suddenly pulled upwards. The tool holder and the tool magazine were originally on the spindle. The tool handles have changed positions.

"Boom!"

With a sound of air pressure again, the tool-changing manipulator was released, rotated 90° in the opposite direction, and then returned to the original position. The tool holder in the vertical downward direction of the tool magazine also began to rotate slowly until it returned to the spindle. The position just stopped.

Then, the tool magazine began to rotate again...