Synthesis of everything starting from models

Because he wanted to know what the overall performance of the printer he synthesized was.

After all, the synthesized printer is generally equivalent to a three-no product. Even as the person who synthesized it, Li Ao didn't know much about it.

At present, we only know that the maximum volume of printed items has been increased, but the speed of the printer and the accuracy of printing are still unknown.

So this requires Li Anchor to conduct the test himself. Only through actual printing can the comprehensive performance of the printer be finally determined.

Li Ao, who was well prepared, took out a USB flash drive directly from his pocket.

Without saying a word, he came to the printer, connected various power sources to the synthesized printer, and then pressed the power button.

When the printer is powered on, it immediately starts a power-on self-test. After all the self-tests are completed, the special light-curing consumables are also poured into the printer.

Li Anchor inserted the USB flash drive into the printer, and then the printer read the model data in the USB flash drive.

Like the fused model synthesized before, all of them have undergone a name given by Li Ao himself - intelligent formatting.

That is to say, the model files he created cannot be used directly on the synthesized printer, so there is this smart formatting of the printer.

With the file formatting completed, Li Anchor couldn't wait to press the start button, and then the printer started running quickly. The printing platform, which was originally hanging high in the air, was directly immersed in the liquid consumables.

Then he looked at the printed things to see what was going on. However, Li Anchor had no intention of stopping what he was doing. He continued to work on the remaining five fused deposition printers.

After having the experience of synthesizing this kind of printer, Li Anchor's movements were obviously much more proficient this time, and his synthesis speed was also much faster. After all, what makes a perfect printer!

As time went by, he dismantled the five printers one by one, and then used the synthesis plug-in to combine them into one.

There were originally five sets of parts in one place, but soon only a single set remained, while the four sets that disappeared were synthesized into two sets of synthesized printer parts.

After synthesizing the parts, Li Ao didn't sit idle and started assembling them directly. It was different from the previous assembly experience. The assembly speed this time was quite fast.

Just when he finished assembling the last part, the running light-curing printer next to him also stopped running. It was obvious that the model he had set had been printed.

The two newly assembled fusion-type printers were nothing new to Li Anchor, but the synthesized light-curing printer was completely different.

Li Anchor ignored the two newly assembled printers and ran directly to the light-curing printer. He lifted up the transparent shielding cover and used his best strength to lift the printing platform filled with models out of the printer. .

Li Ao, who struggled to get it out, couldn't help but think that it seemed like he should have something like a gantry crane in the workshop.

Now this is just a model of resin material. When the metal laser sintering printer is synthesized in the future, it will become a printed part of metal material. It will not be easy to take it out of the machine.

With this in mind, Li Anchor already took a small spatula and began to shovel the printed model off the printing platform.

What is printed by light-curing printing actually has a layer of residual resin filament attached to it. Unlike the fused type, there is nothing but support after printing.

Therefore, it is necessary to clean the model first. Only after cleaning, the participating consumables on the model will no longer be sticky.

Li Anchor, who was well prepared, pulled over a large plastic water tank, filled it with industrial alcohol, and then threw the disassembled models into the alcohol.

After the model was cleaned with alcohol, it was no longer sticky. At this time, Li Ao took a digital vernier caliper, micrometer and other tools to measure the model in his hand.

After measuring all the data, Li Anchor couldn't help but feel happy. The accuracy of the printed model was so high. If you don't look carefully without a magnifying glass, the printed layer patterns are not very obvious.

Obviously the accuracy has been improved, and the speed has also been improved a lot. It is almost the same as the melting type, and the speed has been increased by almost eight times.

Generally speaking, the comprehensive performance of this synthesized light-curing 3D printer is simply awesome. Even the most advanced professional-grade 3D printers in the world that Li Ao knows are not so awesome.

At this time, Li Ao was already excited and didn't know what to do. He just kept circling around the printer.

And after he finally calmed down after turning around for countless times, he looked at the two metal laser sintering 3D printers that had not yet been unpacked, his eyes were extremely fiery.

If these two laser sintering printers can be successfully synthesized, it seems that I may not need to go to any machinery factory anymore. The micro-mini engine I made by myself can be printed by myself with a printer.

Thinking of this, Li Anchor ran directly to the laser sintering printer with fiery eyes. He looked like a pervert who saw a beautiful woman lying naked on the bed.

However, when Li Ao was about to start working on the laser sintering printer, Chief Engineer Feng from Hanyang had already taken Brother A to clean up the live ammunition firing laboratory that they had messed up.

The two of them carefully packed together the bombed model remains that were flying all over the sky. They were talking while cleaning them up.

"Xiao Wu, after we finish cleaning up here, there should be something we need to do!"

When Chief Engineer Feng was talking, Brother A was carefully searching the remains of the model little by little. When he heard Chief Engineer Feng say this, he looked over at him, with a trace of clear stupidity in his eyes.

"Ah? Mr. Feng, what else can I do? Isn't your experiment finished?"

"What's the matter? Of course, we need to report it to the superior. While reporting, we also have to call the police. The model you bought is really too scary. If anyone notices it, the impact will be immeasurable. !”

Hearing Chief Engineer Feng's words, Brother A's head immediately got bigger. This time, the wishes of the water friends in the anchor head live broadcast room were fulfilled.

If he reported it to the police, it was really possible that Anchor Head would be sent in, but he always felt that it was inappropriate to call the police. After all, all the things Anchor Head produced were legal and compliant.

As for what Mr. Feng said about revising the laws and regulations on firearms, that is a matter for the future. What happens in the future cannot be applied to the present.

"Mr. Feng, should we think carefully about it..."