Synthesis of everything starting from models

There are a lot of files in the hard drive box, and because they are files used for 3D printing, they are much larger than other files.

For example, a file opened by Li Ao at this time was fourteen or five gigabytes in size. According to common sense, ordinary home computers would have a hard time opening such a large file, let alone running it.

But Li Ao, who had just switched from shotgun to gun, when he opened the file in front of him, it ran very smoothly, with no sign of lag at all.

The file he just opened is the 3D printing file that he will use later. It contains the printing drawings of all the parts of the Yunwu aircraft model.

At this point, Li Ao should have distributed the print files directly to the laser sintering printer, but he, who has a new computer, didn't want to do this at all!

Now that the performance of the computer has improved, some of the previously rough designs can be further upgraded and rendered.

After the design is completed, you can also use the 550-like computer in your hand to run the model.

Then Li Anchor held the mouse and keyboard in both hands and began to optimize the design of the drawings extremely quickly.

For example, the double-layer wings of the previous Y-5 aircraft model are obviously not in line with the current aesthetics. The design of the double wings on the aircraft is still somewhat backward. Why can't one wing be reduced?

They are all models anyway. This is not a real aircraft, so it would be a good idea to make some magical modifications to it.

With this idea in mind, Li Ao began to optimize the body structure of the Yun-5 prototype.

The structural layout of the upper and lower double-layer wings was directly optimized by him on the structural layout of the upper monoplane. While optimizing, he also used the superb performance of the computer to make certain adjustments to the newly designed wing shape. Simulation runs.

When he redesigned the high-wing monoplane, Li Ao didn't have models that he could refer to. C5, C17, C130, and Fat Girl were all his reference materials at the moment.

It has to be said that the design work is easy to do with the model as a reference, and Li Ao is not a student of aircraft, so there are inevitably some deviations in some common sense.

The top-monoplane wing he re-created now looks like it was created by combining the characteristics of several types of wings.

Anyway, as long as it is the wing of his reference model, the characteristic points of the prototype can always be found in his newly designed wing, but it doesn't matter how awkward it is.

Anyway, they are somewhat different from each other, but when these characteristic points are put together, they appear to be somewhat harmonious.

This went on for several hours, until Li Anchor couldn't stand the growling from his stomach, so he stopped and moved his hands that had been typing on the keyboard for a long time.

And he once again sent the revised version of the wing into the simulation software for simulation operation, and he took out his mobile phone and ordered some late-night snacks on Hungry Meituan.

While waiting for the midnight snack to be delivered, Li Anchor finally felt that the factory building he was in seemed a little quiet. He walked out of the office area and took a look at the mini engine first.

Only then did he realize that the mini engine had stopped at some point.

Li Anchor came to the engine with a trace of curiosity. He reached out to the oil drum and shook it. He directly determined the reason why the engine stopped. It turned out that the fuel was burned out.

This means that since the mini engine started running, a total of 10L of gasoline has been consumed so far, and it has been working continuously for more than 40 hours.

And he has not determined the actual running time. How long the 10L of oil has been burned will not be known until he checks the monitoring later.

After clarifying the situation on the engine side, Li Ao turned back to the production area. At this moment, all the printers had stopped running. No wonder he felt that the workshop was unusually quiet.

Since the printer has stopped, it means that the seven printer printing platforms that he just turned on now all have printed model parts.

Li Anchor hurriedly drove the electric forklift, removed all the printed items from the printer, and transported them to the semi-finished product area.

This wasn't the end yet. Li Anchor cleaned up a printing platform and reloaded it into the printer. The printer automatically started the next round of printing according to the previously distributed tasks.

When all the printers were running again, Li Anchor moved out two large plastic water tanks, and then poured buckets of industrial alcohol into the buckets. He threw away all the parts that had not been cleaned after light-curing printing. Entered the water tank and soaked.

After doing all this, Li Anchor was very tired. After all, he had to do it one printer at a time.

After finishing it, Li Anchor returned to the office area and glanced at the progress bar of the running simulation. Li Anchor took out his mobile phone and looked at his takeaway status.

As soon as he got the phone, it rang, and it also displayed a prompt for food delivery. Then Li Anchor answered the phone and walked towards the door of the factory.

When he walked out of the factory door, as soon as he stood at the door, a man wearing a yellow robe rode an electric motorcycle and stopped in front of him from a distance.

Li Anchor successfully took the things from the other party's hand. When he returned to the office, he had already opened the bag outside, and he still held several large tamarisk bunches in one hand.

He felt so good after eating it, his mouth and face were all oily, and when paired with the cold Feizhai Happy Water, it was really good.

It didn't take long for Li Ao to solve his stomach problem. Only then did he return to the computer and stare at the simulation progress bar again.

Not long after, a completion prompt came from under the work desk. Li Anchor looked up and saw that the prompt also came out. This time, the thing he designed did not make any big mistakes in the simulation.

As for the small errors that are prompted, they are insignificant and are still acceptable.

At this point, his redesign of the high-monoplane wing was considered complete. He put the redesigned high-monoplane wing together with other parts of the Y-5 model, and then distributed them to the laser sintering printer.

When the files were distributed by him, Li Anchor did not stay in front of the computer screen, but quickly walked towards the laser sintering printer in the production area.

When he came to the printer, the printer did not start printing directly. Instead, as before, it automatically and intelligently formatted the received files.

When the progress bar on the printer screen reached the end, the laser sintering printer finally started moving.

First there was a power-on self-check procedure, and then printing officially started. Layers of metal powder on the printing platform were sintered together by high-energy lasers.