Synthesis of everything starting from models

Printing was in progress, and Li Anchor was quite aware of the printing speed that Li Anchor had synthesized by himself.

It didn't take long. Just as he was rendering the renderings of the military drone, all the parts of the communication drone were quickly printed out by the printer.

When he heard the beeping sound in the production area, Li Ao immediately ran from the office area to the production area.

An electro-hydraulic forklift was borrowed to lift all the printed parts from the printer, together with the printing platform.

The silver-white metallic parts made Li Ao feel relieved for some reason. These parts in front of him were one of the foundations for his future settlement.

With many previous printing experiences, Li Anchor took the tools and started disassembling and assembling them on the printing platform.

The parts printed by the printer were removed from the printing platform one by one, and then neatly placed on the open space in the production area.

Soon, the open space where many printers were placed was filled with parts. The neatly arranged parts looked so pleasing to him.

The parts are already in place, so what’s next? Putting it all together of course.

At this time, Li Ao couldn't hold back his excitement. Of course, he was also a little uneasy.

After all, the drone that he has built now, which can carry communication equipment, has a prototype basis, but it was built by himself.

However, after a lot of calculations on his computer, he found that there was basically no problem with the drone body, but whether there was any overall problem was something he could not know now.

But even if there is a problem, it is not a problem for Li Ao who has used the plug-in. Who makes his synthesis unreasonable at all?

Even if there is a problem, after synthesis, the problem will be eliminated directly. Synthesis can automatically discard the problem and come up with the optimal design.

It was with this mentality that Li Ao had enough confidence when he was working on this drone.

Otherwise, even though he studied building houses in college, he wouldn't dare to just build things like this.

After the two sets of drone parts were printed, he assembled them together bit by bit.

And this time, based on his experience last time, he also paid special attention to some issues that should have been noticed long ago.

Issues such as the positioning of the aircraft, speed, altitude, fuel volume, etc. This time, Li Ao was well prepared and took corresponding measures.

Some time ago, he had taken out various instruments purchased from the Hujiang Instrument Factory from the raw material warehouse.

In addition, Li Ao also obtained a batch of special lenses from Hujiang Optical Instrument Factory through Fan Chang's channels.

Although it is still not as good as the lens used on the Pterosaur, who makes this thing cheaper!

As for the VR equipment, it is also purchased from the domestic Ju factory. Li Ao also has corresponding solutions to the positioning problem, which is just to add an extra antenna to the body and develop a public Beidou chip for civilian use.

As for the control system, Li Ao bought it on Taomao. It was removed from the cheapest 32-channel remote control aircraft. The main point is that it is cheap.

Anyway, for the pre-synthetic aircraft, these functions are enough as long as they are available, and they do not need to be very high-end, and they still need to be modified when they are installed.

The machine body was assembled bit by bit by Li Anchor, and various miscellaneous parts were stuffed into the machine body by him.

And those scattered electronic parts that were not systematic at all were welded together by his fashionable craftsmanship using perforated boards. Anyway, Li Ao said, they were all connected.

When Li Anchor started assembling the drone, he had no idea about time, and the day passed quickly.

Just as he was holding a soldering iron and carefully welding the disassembled mobile phone motherboard to the perforated board inside the body, the mobile phone he had placed in his office rang.

The ringing of his cell phone made him come back to his senses from the assembly. He stood up and stretched his body. Li Ao, who felt a sense of accomplishment, glanced at the drone that was nearing completion and walked towards the office.

When he came to the office, he connected the ringing mobile phone and turned on the speakerphone. He poured himself a glass of water and drank it.

Just before he finished drinking the glass of water, the voice of the courier boy came from the phone.

"Hello, are you Mr. Da Shikou? The items you bought on Taomao have arrived! Can you find you when I go to the delivery address now?"

Big corpse scarf? Who is this? At first, he didn't realize what a ridiculous name he was talking about. Then after he swallowed the water in his mouth, he realized that this was the nickname Taomao he had picked up when he was a sophomore in high school!

What did Taomao buy? It was the 3D laser scanner that he had longed for, so he quickly replied.

"Yes, that's me, just come here according to the address!"

Li Anchor put down his phone. Although there was no one around, he still felt a little embarrassed.

Before he could wait long, there was a knock on the workshop door from outside. Li Ao opened the small door of the workshop, and a red-faced courier boy stood at the door holding a big box.

Li Ao looked at the other party's red face and slightly twitching corners of his mouth, and understood what the other party was holding back. He quickly signed and dismissed him.

He held the box in his hand and didn't think about what the courier boy was holding. Instead, he ran back to the production area at an extremely fast speed to unpack the courier.

He had been waiting for a long time for what was in the express box.

He quickly opened the box and took out two extremely exquisite packaging boxes.

Continuing to dismantle it, he took out an extremely large thing that looked like an enlarged version of a wealthy man's money-spraying gun.

Moreover, there is a long data line at the end of the gun handle. Although it does not look high-end, it can accomplish many important things for Li Anchor.

Restraining the urge to combine the two sets immediately, Li Ao put the disassembled 3D laser scanner aside.

Now is not the time for synthesis, don't forget that his communication drone has not been assembled yet!

Li Ao thought for a while and decided that it would be better to combine them together so that he wouldn't have to worry about anything else.

Immediately afterwards, Li Ao came to the machine body with only the final touches left, picked up the soldering iron and continued to weld carefully.

A long time passed, and the sky outside the workshop had completely darkened. Finally, Li Ao stood up from the machine body.

He stood up and stood between the left and right aircraft, stretched his waist, and then looked at the two drones in front of him, with a bright smile on his face.

Opposite him, he saw two weird drones that were not big but looked like stitch monsters, right in front of him.