The opening game is full of free hearts, hard and rigid snow moon sword fairy

Chapter 0158 – Chaotic Cloak Hammer Method!!

“Start work!”

Under everyone’s gaze, several skilled casters quickly began to manufacture molds.

Those with styles are cast directly with styles.

If not, it is to draw drawings on the spot.

This is very easy for the old man and Lei Wuyun.

“You guys go and put these ores into the magma separately and melt them.”

“Some of these ores need to be refined for a long time.”

Hearing the old man’s order, several people also quickly began to act.

“I didn’t expect that when I didn’t have the heart to have a heart, I could actually forge weapons.”

“Look at you one by one, or I’ll get a long stick to play with.”

The skill of the heartless body is in the fist and foot kung fu.

Whether it is the sword and stick method, there are some involved, but they are not proficient.

“If you don’t say it earlier, is it a little late now?”

“You, let’s hurry up and work.”

The first sword that Lei Wuyun and the old man were about to forge was an imitation of the Xuanyuan Divine Sword.

The casting mold was also quickly made.

All the ores needed for casting, such as copper, gold, and iron, were put into the molten slurry.

Over time, the molten iron, which quickly melted, mixed together.

The old man carefully took it out and poured it into the mold.

The embryo of a Xuanyuan sword was soon formed.

The sword body, from raw materials to finished products, must go through multiple processes such as blanking, hot forging, shoveling, filing, openwork, copper inlay, polishing, decoration and so on.

The key to this is exercise.

First, hammering: the iron block is smelted in a furnace, and the sword blank is made into a sword blank by the carburizing process, repeated many times, the degree of which depends on the quality of the sword (hard sword, soft sword or martial arts sword).

Second, planing file: use a steel knife to sharpen the file, so that the thickness of the sword body is moderate, there is a certain slope between the sword ridge and the blade, and the sword ridge must be in the middle of the sword body and form a straight line.

Third, quenching: using the traditional quenching method, after “strong forging”, a special quenching agent is used for “softening” treatment, so that the sword body is rigid and soft, and can be flexed and extended.

It is a high-precision craftsmanship, which is not convenient for ordinary craftsmen.

Fourth, polishing: Place the filed sword on the house stone to polish it.

Rub evenly with a gold steel sandcloth wrapped iron ruler.

First coarse grinding with coarse sand cloth, then fine grinding with fine sand cloth.

Polishing is twice as much as hammering and filing.

Fifth, steel grinding: the already elastic sword is sharpened with steel blocks; Or use a steel ruler to tie the sword and grind it on the stone.

After the sword is sharpened by “bright stone”, there is no need to plate nickel, and the sword body is blue and illuminated.

Sixth, inlay: after polishing, the sword body is engraved with a steel needle, the name of the sword, the shop number and the words of the customizer’s inscription, embedded with red copper, and chemically treated to make the glaucoma sword appear gold, produce color contrast, and have a sense of spiritual treasure.

The old man said all the manufacturing processes in one breath.

Then he pointed to the sword embryo on the forging table and said, “This is the process of forging. ”

“Each of you has a suitable hammer.”

“Circle around the forging table.”

For a while, Lei Wuyun, Lei Wujian, Wuxin, Zhao Yuzhen, and several casters all surrounded the forging platform with large iron hammers.

Although the hammers held by several people in their hands weighed differently, each one was no less than 200 pounds.

“This first process doesn’t require any skill.”

“You just need to have brute force.”

“Let the various iron ores inside be completely integrated.”

“So you just have to beat as much as you want.”

Since he listened and nodded, Lei Wuyun picked up the first hammer.

With Duang’s sound, the sword embryo on the forging platform directly flattened by more than half at a speed visible to the naked eye.

Lei Wuxian behind him, and then he smashed it with a hammer.

After that, several people began to take turns in a very tacit understanding.

Originally, a normal sword embryo quickly became a thin layer under the combined force of several people.

At this time, the old man took another piece of sword embryo and melted it that could be forged before.

Although everyone had some doubts in their hearts, under the leadership of Lei Wuyun, several people became ruthless forging machines.

Soon, after everyone hit dozens of sword embryos one after another, the old man finally let a few people stop.

Then the molten iron that had been forged and melted before was forged again into a sword embryo.

Unlike before, this time the sword embryo looked golden all over, and it was very round and full.

It is also much heavier in terms of weight than before.

If the previous sword embryo weighed five pounds, then now the sword embryo of the same size has to be 20 pounds.

“This time it will be forged by my old man himself.”

“Well, let you see the old man’s ability to forge.”

For a while, everyone retreated to the side, and the old man took a 350-pound sledgehammer and picked it up.

It’s just that unlike everyone, the old man turned around again with the power of his collision anyway after smashing down.

One move leveraged the power to increase the power of the second hammer again.

This made Lei Wuyun’s mind can’t help but think of a hammer method for striking iron.

Messy cloak hammer method.

It seems to be constantly superimposed in this way.

A hammer is stronger than a hammer when the individual can withstand it.

That sect’s chaotic cloak hammer method is a full eighty-one hammer.

This made Lei Wuyun’s heart also a little excited.

If you forge it with your own full-level dragon-elephant skill, I don’t know if you can swing these eighty-one hammers and forge this divine sword at the same time.

Under everyone’s gaze, the sword forgers below also hammered one by one, counting as if they wanted to know where the old man’s limit was.

Under such circumstances, everyone’s emotions were also instantly driven.

“Nine hammers!”

“Ten hammers!”

“Eleven hammers!”

Twenty hammers!

When everyone’s voice fell, the old man put away the hammer and stood aside panting.

“The head of the family is really powerful.”

“Our first sword forger back then in Kenshinzuka was only swinging 15 hammers!”

“Yes, so far I can only swing three hammers.”

“Who isn’t? This countershock force is stronger and stronger every time, if there is no strong core lower body strength, it would have been swept away by this big hammer. ”

“Back then, Wang Laosan didn’t measure his strength, and he had to try to break through his limits, but his arms flew away.”

“This sword embryo already has a faint sword shape.”

“If you do it a few more times, this sword should be able to be forged.”

Lei Wujian saw that the old man was working so hard, and he also wanted to try it, so he stepped forward and said: “Grandpa, I don’t think this method is so difficult, or should I try it?” ”

The old man originally wanted to refuse, but he was indeed a little old, and if this method was performed several times in a row, it was indeed a little overwhelming.

So he looked at Lei Wuyun.

After all, he is skilled in forging skills.

But Lei Wuyun said, “Let’s try it first.” ”

“No matter how many shots I play, I’ll play again after that.”

Lei Wujian listened excitedly, and began to smash it along the steps of the old man with his 400-pound sledgehammer.

Lei Wujian is also the strength of the Escape Heaven Realm, plus the dragon elephant Ruogong has reached the 5th layer.

So unexpectedly, he actually smashed 30 hammers, which is taller and stronger than the old man.

This made the old man ecstatic for a while, as if he had found a forging genius.

However, after unintentionally playing, his performance was usual, and he only smashed a record of ten hammers

Zhao Yu’s strength is really stronger, and with the means of the iQue Xuan Realm, he also smashed 30 hammers.

This made Wuxin a little disappointed for a while.

“Am I the weakest among the co-authors?”

However, as soon as his words came out, the other sword forgers were a little self-contained.

However, at this time, everyone’s eyes were focused on Lei Wuyun.

You must know that the movement made by Lei Wuyun before is not small.

In addition, he was holding the largest 500-pound iron hammer on the scene.

Many people also want to see how much this thin young master of the hemp pole can swing for a long time…