Siheyuan: The night demon comes, don't sleep too dead at night

Besides, when there was an accident in the factory, the one who died should be a wicked ghost.

As a result, his father died.

Wicked ghosts owe their family.

Although wicked ghosts are fierce, they have a fluke mentality.

Maybe even the wicked ghosts won't be able to find out if the fish is taken.

Even if the wicked ghost finds out and the stick refuses to admit it, then nothing will happen.

"Today's appointment is no longer acceptable."

"Everyone has seen this. If we do it, it will be easy to be discovered."

"The fish has to be dried before we can eat it. We'll get it after it's dried."

Jia Zhang's eyeballs rolled.

"Grandma, you are still smart."

"Wait for the wicked ghost to dry the fish, we'll take it back and eat it directly."

Sticky is happy to think about it.

Zhang Bingye walked to the front yard.

"Bingye, go to work."

Yan Fugui stood at the door and said hello.

Holding a rag in his hand, he wiped the bicycle.

This is the only bicycle in the compound, and Yan Fugui treasures it very much.

I have to wipe it off every day after get off work.

"Well, I went to work."

Zhang Bingye nodded.

Step up and step over the gate of the courtyard.

Yan Fugui laughed.

Zhang Bingye is alone in his family, he is young and his salary is still high.

If you have a good relationship with him, can you have less delicious food?

Yan Fugui had a good plan.

Zhang Bingye entered the Red Star Steel Rolling Plant and came to the second team of the welder section of the workshop.

He is a welder in the second team.

Liu Haizhong works in a team, and usually the two of them don't get along.

"Bingye, good morning."

"Morning, Bingye."

Several workers from the welding class greeted Zhang Bingye.

Zhang Bingye responded with a smile.

Sitting in the team area, put the lunch box in your own small box.

The team leader held a brief meeting, paying attention to safety and labor discipline.

Let the big guys go to work.

Zhang Bingye put on his labor protection gear and came to his post.

He is now a second-level welder, doing arc welding with electrodes.

This live has a lot of smoke and dust, and the smell is relatively strong.

It does little harm to the human body.

But there is no way, the production environment of the workshop is like this.

Apprentice welders and first-class welders all do some spot welding.

Carrying big welding tongs.

It's a hot day, and after a day's work, I'm covered in sweat.

In comparison, Zhang Bingye's job is not bad.

If you can be promoted to a third-level welder, the work you do will be even more advanced.

Zhang Bingye had always wanted to be promoted through the assessment, and having more money was one aspect.

Improving the working environment is also a big reason.

Zhang Bingye is currently a seventh-level welder, and he will be awarded a seventh-level professional title when he officially passes the welder assessment.

You can get rid of the dirty work of spot welding and electrode arc welding.

Specialized in advanced argon arc welding and precision welding.

Moreover, level seven welders can take apprentices and let them do chores.

Most of the time is dedicated to studying welding technology and solving some advanced metal welding problems.

Zhang Bingye was wearing goggles, holding a welding torch in one hand and covering it with the other.

After welding a seam, take a hammer and tap it along the seam.

Hammer out the impurities.

Then repair welding again.

He works very fast today.

One morning's work was done in only two hours.

And the filled weld seam seems to be poured with molten iron.

Flat and thick.

There is no lack of welding, let alone welding porosity.

Level seven welders are used to do the work of level two welders.

It's like shooting a mosquito with a cannon.

With a pinch in hand, naturally there is no need to say more.

After Zhang Bingye finished his work, he was not idle.

He started working on the big welder at his post.

As a welder, if you continue to move up, you have to take the route of an engineer.

If you want to be an engineer, researching circuits, dismantling and repairing mechanical equipment are all basic skills

In the seven-level welder skill card obtained by Zhang Bingye, the knowledge also includes equipment.

It's always shallow on paper.

Zhang Bingye will be fine, he compared the knowledge in his mind and researched the equipment.

"Bingye, you worked really fast today."

"The next welder exam, the third-level designation is stable."

Seeing that Zhang Bingye had finished his work, the workers nearby said enviously.

"You're not bad at studying, this time the welder assessment, we will advance together."

"No one is left behind."

Encouraged by Zhang Bingye.

"Haha, that works."

"If both of us have advanced, let's find a restaurant and have a drink."

The co-workers laughed.

"Zhang Bingye, what are you doing?"

"Everyone is doing it in full swing, and you are the only one here stealing and playing tricks."

The leader of the welder's second team saw that Zhang Bingye was not working, so he was tinkering with the welding machine.

Angry criticism.

There are several groups of welders in a rolling mill.

Each group has fixed tasks, and the group leader is responsible for supervision and coordination.

If the task cannot be completed, the team leader will be punished.

If the work is not good, the enthusiasm of the employees cannot be mobilized, and the tasks cannot be completed, the team leader has to be dismissed.

"Leader, my morning task has been completed."

"Take time to study the welding machine. If this thing breaks down, I can start to repair it."

Zhang Bingye was not angry either, and explained easily.

"If this thing breaks down, there will naturally be people from the fitter class and the electrician class to take care of the repairs. What kind of trouble do you have?"

"Show me what you've done, and I'll check it out."

"If you dare to touch fish and lower the task load of our team, I will have to criticize you."

The team leader said seriously.

Zhang Bingye showed the team leader the workpiece he filled in for inspection.

The team leader was obviously taken aback when he saw it for the first time.

018: The shock of the welding team leader

The weld is also perfect.

Can a secondary worker do this?

The team leader couldn't believe it.

After checking several workpieces in a row, they are all of uniform quality.

The team leader took a hammer and tapped the filled weld.

Dries fast and has a good finish, not necessarily great.

Because some welders will cheat and play tricks.

After filling a weld, do not use a hammer to tap to remove impurities, so that there is no need to repair the weld once.

The team leader is an old welder for more than ten years, and he knows all about these tricks.

Hammered the welds of several workpieces.

No iron slag seeps out.

It shows that Zhang Bingye is down-to-earth and has completed the welding task with quality and quantity.

The team leader was really surprised this time.

Looking up at Zhang Bingye, a smile appeared on his serious face.

"Okay, Bingye, where did you sneak up to learn this skill?"

"It would be a waste to put you in this position."

"With your hand, you can pass the third-level welder examination with your eyes closed."

The team leader lightly hammered Zhang Bingye's shoulder with his fist.

"The team leader, after I finish my work, can I learn to weld?"