Unlimited Machine War

In the midst of the busy days of countless people, the three-year stay in the camp’s territory has passed away. In the past three years, the power of the ship’s war science and technology system has been greatly increased because of the integration of technology. Materials, weapons, and energy have all seen significant improvements.

But there are also products that can't be copied in three years, Gaeta Ray.

Even after three years of complete analysis of all the technologies contained in the test-type gables, even Rob is sure to be able to create a more perfect body than the test-type gables, because the energy source of the gata ray cannot be copied. In the case, even if a more perfect body is manufactured, it cannot be a true cover because of the cover ray.

According to researchers from Luo and his subordinates, if it takes seven years to copy the Gaeta ray at the current speed, Xiao Ran does not know how many years the doctor of the Gaeta world copied the Gaeta ray, which can be collected. The strength of all the territory of the entire legion has so far taken seven years, and a total of ten years before and after has been very long.

The complete destruction of Gaeta's other technologies is not a difficult task for the entire research department. In other words, except for the Gaeta Ray, the technical content of other places is not as high as expected, even if it is the 0079 world. The technical level can be fully resolved, and the only thing that is really special is the Gaeta Ray.

Compared to the Gaeta, the technical content of the Gaeta NEO is higher than that of the Gaeta. However, the Gaeta NEO is also completely analyzed. In terms of materials, the Gaeta active alloy is manufactured. The most difficult point of relationship has been resolute, and other technologies are really not what the current scientific research force is.

After the first year of the Gaeta NEO test machine, there were three generations in the territory. The first generation of the Gaeta NEO test machine was completely made by the imitation of the cover NEO, except for the additional weapons. Slightly different, there are more beam rifles, beam sabers, beam weapons that can be used in all three forms, and the appearance after deformation is not much different from Gaeta NEO.

In this actually a generation, the territory already has all the capabilities to make the Gita NEO. The department that can develop the Gita NEO body is not satisfied. It is only this way. According to the current situation of the ship group, the second R&D has been carried out again. The second time the test machine was off the line was only half a year away from the first test machine, but the second newly developed test machine was already different from the previous version.

The concept of the first generation is reproduction, and the concept of the second generation is a fusion, so that the three bodies of the Gaeta NEO have excellent individual combat capabilities even in the case of separation, and the integration of the existing fleet is also a fighter. In this case, the ability of the three combined fighters to have the same deformability has become the key target of this research and development.

After half a year of research and development, the flexible use of the Gaeta alloy is equivalent to the complete re-development of the Gaeta NEO II first test machine will be off the assembly line, combined with the current deformation of the aircraft technology The product, the fighter plane has been very different from the Gaeta fighter, has already had many features of the VF-30 series of the fleet deformation fighter.

The experiment was finally successful. Three fighters with three-stage deformation capability were successfully combined into a brand new Gaeta. The new Gaeta looks completely different from the Gaeta NEO. The shape is more thin and deformed. There are also many parts of the skeleton that have been exposed. This is a complete testing machine, even a weapon is not equipped.

From the second generation to the third generation, the final product has been used for one year. The whole year is only the supplement and improvement of the second-generation testing machine. Compared with the time spent directly combining the new fighters. It is longer, but the end result is extremely gratifying.

The final new machine completely abandoned the name Gaeta, because this machine has not had much relationship with Gaeta except for the three-machine combination mode with the Gaeta, and it has completely changed into a new series.

The three fighters have the same three-stage deformation ability as the general deformation fighters before they are combined. The fortress form, the MS form and the fighter form are not bad, but the appearance is also more different from the general fighter.

The newly-built combined fighters have different three-stage platforms, all of which use Gaeta alloy as the outer armor. The ductility and flexibility of the alloy are combined with the multi-stage deformation structure to achieve the purpose of deformation, and they are compared with the normal deformation. The fighter plane is slightly larger.

The first body is a high-speed body. It has seven layers similar to the VF-4's old model, but it needs to be more streamlined, bigger and stronger, and looks good and domineering. More, the small flying wing with recyclable folding uses the modified beam green gun, and the rear thruster module is significantly stronger than the normal body.

After the body is more deformed, the body shape will naturally be larger, but even if the foot looks a little thicker, and attach some weapons, such as a circular small electronic gun, two small Yang electronic cannons It directly replaces the arm, and the palm is directly 'long' from the muzzle of the electronic gun. When it is not used, it can be 'reduced' back. In addition, the two electronic handles are attached to the wrist. The beam saber, the individual combat capability is not bad compared to the normal deformation fighter.

The second machine is a multi-purpose machine. It can increase the detection equipment into a reconnaissance plane. It can be turned into a fighter with a sniper rifle. The stealth performance is the best among the three machines, and perhaps it has a great relationship with the body shape. The mirage system has also been installed, and the amount of weapons is also the least.

In addition to the standard missile launching capability, the beam saber, the two-door and other body-mounted beam guns are mounted on the body, and all other weapons are matched according to the individual needs of the attack, depending on occupation or personal ability. Sniper guns, beam guns or standard beam guns, so special and general purpose are emphasized in both shape and use.

Special means giving the body itself or giving special abilities after the combination, just like the mirage system, the solar furnace, the λ-DRIVER, the heat radiation launcher, the Secker system that can be used by ordinary people, all two These things are installed on the machine, so the body itself does not have the conditions to install other weapons. It can be said that the driver is the most selected but the driver's body is the least selected.

The more people who can exert the power of λ-DRIVER can use the capabilities of this machine, and those who cannot use λ-DRIVER can use it.

The shape of the VF-171, which is the most versatile and evolved several times, has undergone some transformations that are unique to the combination of the body, and the size of the body has changed as much as the No. 1 machine. A circle and a few more interfaces.

The No.3 machine is a completely complete heavy fire body. It has the most powerful firepower and the most powerful energy. It is an arsenal itself. The shape is referenced to VB-6K?nigMonster, but the structure is It has been remodeled and has a beam of light to armor. The defensive power is the highest among the three bodies, and the flexibility is the lowest.

Missiles, beam guns, yang electronic guns, GN dragon cavalry, solar furnaces, beam-biased armor, have the ability to launch large missiles, that is, MED warheads or reaction bombs, completely extending toward the firepower and armor direction.

All three bodies use the Gata active alloy as the armor material, so it is not surprising that the armor changes from square to round due to the deformation of the internal structure skeleton during deformation, plus the addition of VPS and energy conversion. Armor as a support, the strength of the skeleton and the strength of the armor do not have to worry.

The three bodies are also combined in three different forms. The first machine is the general combat form of the head. After the combination, the foot of the first machine becomes the arm of the combination machine. The two electronic guns will appear on both sides of the head. The machine is in the middle, the third machine is located below, the wing of the second machine becomes the flying wing of the group and the body, and the arm of the third machine becomes the armor and shield of the beam biased to the armor, the weapons are far and near Yes, the original beam green gun became a huge beam saber, the most versatile.

The second machine is the air-fighting combat form. Because of the relationship between the third machine and the middle, the foot of the original No. 2 machine has become a pair of adjustable flying wings. The first machine uses the highest propulsion capability to make this form. Get the fastest speed in three forms, but not too strong land combat capability, the main attack mode is shooting, and can maximize the λ-DRIVER effect.

The third machine will be the strongest firepower in all forms. The four cannons that cannot be used in other forms will be extended, and all the weapons of the body will be used. The main attack methods are fire coverage and Fire bombing.

In general, the No. 1 form emphasizes general competence, the No. 2 form emphasizes high-speed combat capability and special operations, and the No. 3 machine emphasizes maximum firepower, and so does the separation. However, in any form, once the combination of the mirage system is common, the solar furnaces installed in the second and third machines can also receive the same frequency, and the auxiliary driving of the third machine is used to produce the Harrow, the GN Dragon Cavalry. Use is also not a problem at all.

This new body is named CD-1, also known as the Guardian Type 1, and the three machines are separated into the C machine body. After the combination, it becomes the B machine body, perhaps because it is in the territory under the real area. It is built, so it is also rated according to the level of the real area.

After the completion, only a total of fifteen groups were created, one of which was taken over by the Yinhe singer by Xiao Ran, the first machine was driven by El Eyre, the second machine was driven by Moses, and the third was driven by Billy. No.