The big era starts in 1983

Chapter 88 Qualifications to sit at the negotiating table
Seeing the red circles under Bai Shan's eyes, Bai Hao walked over.

"Bai...Auntie's grandfather? What's wrong with you." Bai Hao didn't know that the person in front of him was his own grandfather, but felt that the old man was very kind, and couldn't help but get closer.

Bai Shan wiped away his tears: "My son also studied machine tools back then, and then died of illness."

"En." Bai Hao bit his lower lip and thought for a while: "Well, I don't study machine tools, I just like to study things that foreigners hide so that we can't use them. Right now, there are no good machine tools, and many things can't be done if we want to. There is no way to get it out. So, let’s finish the machine tool first.”

Bai Shan was amused by Bai Hao's words.

"Good."

Bai Shan liked his grandson more and more, although it was a pity that he couldn't tell, but it didn't affect him from looking at Bai Hao up close.

Bai Shan asked suddenly: "How much money do you have?"

"A bit."

"You seem to like the three-entry yard very much. I'll ask the old man to help you. I guess it will cost 10 yuan."

that yard.

Bai Hao's eyes lit up, it was the courtyard 300 years ago, and the cypress tree inside was 300 years ago.In the imperial capital, in my time, even a few tons of money could not buy a set of simple courtyard houses.

These three yards cost one hundred thousand.

This is not equal to giving away, why not.

"Yes, yes, but I don't have Xia Guocoin, I only have a dollar."

"51 U.S. dollars, let me help you." Bai Shan had inquired a long time ago, and suddenly wanted to buy it, not only because of the nice yard, but also because he discovered that Bai Hao had dug a hole to the bottom of Workshop [-] to store materials in a safe.So it's better to buy that yard, because that yard was used by people with titles hundreds of years ago, and there must be a secret room in the yard.

The secret room can be remodeled so that Bai Hao can hide materials, blueprints and other objects.

No matter how good the No. [-] branch factory is, no matter how good the newly expanded several acres of new factory buildings are, Bai Hao is also contracted, not his own.

Although Bai Shan is selfless, when it comes to his grandson, he is partial to his grandson and wants to save some for his grandson.

Bai Hao was a little moved, but he still wanted to ask Zhang Jianguo's opinion on this matter, as well as the opinion of the new mother, Bai Lan.Then he changed the subject: "Master Bai, there is a big event today, in case my master doesn't hold up later, you can support me."

"what's up?"

Bai Hao glanced at Catherine, Bai Shan nodded, he understood.

The person who took over Fengxi Machine Tool Factory was left behind, and Bai Hao and others returned to the Ninth Branch Factory.

Close the door.

A group of people entered the workshop.

Everyone in the workshop, including Guo Fengxian, changed into work clothes as required.

One was running, and a middle-aged lathe worker that Bai Hao didn't know was operating the machine.Feng Yuchun stood aside with his eyes on, and several people were constantly recording something with notebooks and pens.

Bai Hao was about to step forward and was held back by Catherine. Catherine stepped forward to observe and then stepped aside.

A set of workpieces was removed from the machine tool, and then Li Dong, who was sitting beside him, started to assemble on the workbench, and then someone stepped forward to measure.

"No.90 six test machines, workpiece accuracy..." a long string of report numbers.

It was only then that Catherine noticed that there were notebooks that were one foot high neatly lined up on the workbench over there.

Catherine said to Bai Hao: "They are making a circular curve reducer. This one is indeed a four-axis. Although it is small, it is indeed a four-axis. It runs fairly stably. However, your control program is too poor. You need to have Excellent craftsmen need to cooperate to complete difficult and complex parts."

What Catherine said was true.

The operator on the stage was a sixth-level worker, not Li Sanpao's apprentice, but someone brought by Guo Fengxian himself.

Because ministries and commissions also need real first-hand data.

It was only then that Feng Yuchun noticed that there was someone, and they were foreigners.

Walking up to Bai Hao, he asked, "Bai Hao, who are these two?"

Catherine made a request: "I want to take a look at the control system you have prepared."

Bai Hao nodded beside him.Feng Yuchun asked the doctoral students to step aside.

Catherine looked at it carefully for half an hour, and then said: "Some ideas are very advanced, much better than I imagined, but they have not been completed. I don't have a mature four-axis control at hand now, but I have a paragraph. I added the four-axis test system for the test to the program, so that the four-axis machine with hard non-synchronous turntable can be used immediately, but it can't make difficult parts, it just works."

After speaking, Catherine took out a box of three-and-a-half-inch floppy disks from her briefcase, took out four of them and handed them to Feng Yuchun: "This is a horizontal four-axis machining center control system that has been eliminated. The university graduates modified some of them for graduation design."

Change, change immediately.

Regardless of who came, if this kind of thing has source code, it can speed up the research progress of Jingzhao Jiaotong University.

Starting from scratch, with only a bunch of theories and concepts, it has exhausted five Ph.D.s to barely come up with a usable operation control system in such a short period of time.

Immediately replace it with a new control system, and input the processing program of the parts that have been calculated countless times.

This time, the biggest advantage is that there is no need for the master craftsman to confirm the positioning and accuracy three times in the process of processing. It only needs to determine the positioning point for the first time and form it once, and the accuracy is better than the previous one.

Seeing that the doctoral students were not used to it, Catherine did it herself.

Li Sanpao beckoned for Bai Hao to come out with him.

Going out the door, Li Sanpao said: "Boy, it's a good thing that you let Lao Wang cast the base. This kind of machine can't be replaced by another person. If it's a little bit worse, the machine will get worse the more you use it. Also, the guide rails of this bed are really not good. , there will be deviations in a year at most. By the way, what does the golden-haired girl do, she is not very old, but she understands it very well."

Bai Hao said, "Didn't anyone tell Grandpa you when she came yesterday?"

Li Sanpao shook his head: "No."

Only then did Bai Hao say: "The daughter of the beautiful Haas Company."

Li Sanpao's eyes lit up: "You said it's that Haas who works on machine tools?"

"kindness."

"No wonder, a real insider."

Guo Fengxian and others were just guessing, because Catherine didn't give her name, and Bai Hao asked Lu Qiao to speak for him without saying who it was.

As for where Bai Hao went overnight, no one asked.

There are not many people who know about this matter, let alone rumors.It is normal for Li Sanpao not to know.

Li Sanpao sighed and told Bai Hao: "Boy, our machine can work, but things really don't work. Many key parts seem to work now, but things will go bad after a long time. Let me tell you, the guide rails in Taishan Prefecture That’s right, we need to change to a better one, I’ll tell you about this guide rail, I just heard that the big leader wants to help you, so we want the best guide rail and lead screw.”

(End of this chapter)