The big era starts in 1983

Chapter 89 Overjoyed, it's done!
Li Sanpao has worked as a machine tool all his life.He knew very well what a good machine tool meant to the factory. The old man didn't sleep for a few hours these days, and spent all his time on this machine tool.

During the reassembly process, he can feel which parts are good and which parts are bad.

He began to tell Bai Hao all the Xiaguo factories that he knew could provide the best quality parts one by one.

While talking here, the sound of the machine starting suddenly came from the room.

Li Sanpao pulled Bai Hao and hurried into the house.

It was indeed activated, and Catherine saw Bai Hao and said: "Right now, this four-axis machine is indeed real. You really have the four-axis technology, but your four-axis machine is still in its infancy. I just completed the control system. After adjustments, I entered a piece of work I made in college, just to try it out.”

A complete rectangular aluminum block has been hoisted up.

Hoisting is technical work, fixing the aluminum block on the workbench is also technical work, and completing the initial positioning is even more technical work.

Of course, writing a processing program for this aluminum block requires higher requirements.

The machine still cannot replace the master craftsman, because the master craftsman will design the process better.

The speed visible to the naked eye of the rectangular aluminum block is changing.

Li Sanpao suddenly said: "This part of the process is not well designed. If it is changed to No. 76 milling cutter with a speed of [-] mm per second and a [-]-degree angle of feed, it will be better. Now it seems that there will be subtle problems. It is rough, or it needs to be repaired to make it smoother."

Catherine was curious what the old master said.

She is half-toned in Xia Guohua.

After Bai Hao translated, she replied, "That's right, that's it, so I can only add another knife."

Process is experience.

After all, it is a work graduated from Catherine University.

Soon, the aluminum block was finished, and no one touched the parts during the whole process, only someone stepped forward to hook off the excess aluminum chips and added coolant twice.

Venus.

A beautiful aluminum Venus recessed statue.

This is the charm of the four-axis machining center.

However, it is also a pity.As Catherine said, the machine in front of me is a hard non-coaxial linkage turntable, which is the fake four-axis that Bai Hao said, and it can only engrave embedded, not a complete three-dimensional one.

Feng Yuchun and Wu Qianye didn't dare to add the turntable.

The turntable designed by themselves kept breaking down. They were afraid that Bai Hao would lose the chain during the show, so they only used the mouse-tooth hard turntable.

Li Sanpao stroked his chin: "This can be complete. I'll take the parts apart and reinstall them in reverse as long as they align with the marking line, and then set the program behind it. It can be done."

There is no need.

Catherine came here just to confirm whether Xia Guo had really mastered the three-axis and four-axis technology, even the ordinary three-axis and four-axis technology.

Now it is obvious that from what I saw on this machine, Catherine believes that Xia Guo not only has a complete three-axis, but also has a prototype of a four-axis.

Bad, just the control system.

It is believed that Xia Guo will have a four-axis machine tool with a turntable in as little as half a year and as long as a year.Because the control system is the most difficult to block, as long as a senior engineer of Xia descent returns to Xia Kingdom from the beautiful country, there is no need to bring any information, just what is in his mind is enough.

Although Li Sanpao doesn't understand programming, he understands craftsmanship.

He can set the process flow, and professional personnel are responsible for writing the cutting process for making the second half of Venus.

This is somewhat different from real programming.

Standing and watching, he felt that he was 20 years younger, and he probably could learn this thing.

Li Sanpao said: "This is like talking. Let's say, how fast to enter the knife, at what angle, how much to enter. Then change the knife, and then... It's not difficult. However, it seems a bit difficult to control these talking things , I don't quite understand."

But what Catherine paid attention to was the table of notebooks piled on the pure iron table.

Although she is not proficient in Xia Guoyu, she remembers that someone mentioned No. 90 several times, which is enough to prove that the four-axis machining center has been tested nearly a hundred times after it is assembled.

Looking at the pile of parts next to it, she could feel that it was constantly trying new mechanical structures.

It can be seen that Xia Guo's four-axis is not far from mass production.

Catherine flipped through the notebook casually. Although she was not proficient in Xia Guoyu, she knew a little bit.

The time was written on the corner of the first notebook, which was the morning of the day before.

Seeing this, Catherine asked Bai Hao: "Did they not rest, at least a day and a night?"

"It does not matter."

Bai Hao did not answer this question.

He is even more aware of how everyone worked so hard when the first four-axis was assembled.

Bai Hao asked Catherine again: "Now that you have seen my four-axis, I will call your home next, then send a fax, and then I will take you to the hot spring, and then talk about the details?"

Catherine nodded: "Okay, our Haas company has agreed to your order in advance, and you can prepare the contract. I believe that you can complete those ordinary machine tools that are equivalent to our beautiful country 15 years ago. But, you have to understand, Our Haas company values ​​reputation, so we need to use our parts, and what is the proportion of use, I need to arrange someone to come and evaluate."

"no problem."

Bai Hao breathed a long sigh of relief. He knew that Haas had a large number of overseas orders. In his memory, because of this strike, he had paid more than 5000 million in liquidated damages for failing to deliver goods to Ah San Guo in time.

It is impossible to pay a liquidated damages of 5000 million US dollars for the total value of a thousand ordinary manual machine tools.

So, how big will the total order be.

It seems that this piece of fat is enough for him to take a bite.Can you bite it again? Let's take a step and see.

Bai Hao, who was in a relaxed mood, took out a cigarette, but was slapped away by Li Sanpao: "Smoking is not allowed in this room. I heard that the machine must be kept in good condition, and the temperature and humidity must be maintained. If you have money or not, you must first Get an air conditioner for this house, and then nail the inside of the house with fireproof boards."

"En, en." Bai Hao didn't even dare to pick up the cigarette.

On the contrary, Li Dong's new apprentice Zhao Fang ran over to pick up the cigarettes, and even picked up the shredded tobacco that fell on the ground one by one.

When Bai Hao walked out with Catherine, he put his hands behind his back and gave Guo Fengxian a thumbs up, Guo Fengxian looked at it and smiled.

Li Qingyue came over and asked, "What do you mean?"

Guo Fengxian watched Bai Hao walking away with Catherine from afar, then turned around and said to Li Qingyue:

"It's done, and we're ready to negotiate. I don't mind using all Haas parts for an order of [-] ordinary machine tools. After all, this is our first order. But Bai Hao's opinion is also correct, use as much as possible." Qualified parts made in our country will be more beneficial to future development.”

It became.

This is a happy event.

(End of this chapter)