God-level industrial master

Chapter 52 Emergency

This speed!

This efficiency!
Simply...

Click, click, click...

The stamping of the terminal is very rhythmic. With every stamping action, a terminal is stamped and formed, and it is automatically ejected from the stamping die gently, and gently rolled down to the side where the terminal is placed. In the wooden box.

How was it stamped before?

Although it is also a one-time stamping and forming, it is completely manual operation. The stamping worker needs to put the blank into the stamping die, and after the stamping is completed, the terminal must be taken out.

Now it is fully automated.

The strong contrast between manual and automatic made everyone stunned, and their expressions froze on their faces. Only the stamping sound of "click, click" sounded, and after a few seconds of silence, someone finally responded and shouted Exclaim!
"My God, I'm not mistaken, it's unbelievable, the speed can be so fast!"

"This speed is too fast!"

Xiao Liu was even more excited and said: "Boss, this is our new mold. The stamping speed is at least three times faster than before. I can't believe it!"

Tang Fei said happily: "Xiao Liu, from now on, you will be much more relaxed. You don't need to manually operate one by one, but realize the automation of stamping."

"En." Xiao Liu nodded vigorously with great joy.

The upgraded version of the automatic stamping die finally has the first set. Tang Fei decided to use it for a few days. It must have some minor problems, which will be exposed during the use process. Improve and perfect it in a targeted manner. Then, Make a second set, or even a third set of such stamping dies.

Such a good stamping die must have at least a few sets.

In the future, the production of our own connectors will all be stamped automatically, and there is no need to manually stamp one by one. Such stamping efficiency is too low.

If other suppliers know that Tang Fei thinks that the efficiency of one-time stamping is low, he will probably jump up and say with tears in his eyes. Not only do we manually stamp one by one, but it takes several stamping processes to complete a terminal. You stamp and form it at one time. Isn't that enough?

The other suppliers who make connectors are all traditional techniques, which are low in efficiency and poor in quality. Naturally, Tang Fei doesn't like their production techniques. For Tang Fei, they will all use automated stamping and forming. The efficiency is higher than those of those suppliers. several times.

The first set of automatic stamping dies was put into use and began to show amazing stamping efficiency. The first type of terminal produced today was quickly completed, a total of [-] pieces.

This saved a lot of time than usual, and it only took more than an hour.Seeing that a total of [-] stampings have been completed, Tang Fei said loudly: "Change the stamping module, and we will stamp the second type of terminal."

"Boss, I'll replace it right away."

The worker in charge of stamping, Xiao Liu, seemed more excited than Tang Fei, and immediately began to talk about removing the stamping module of the stamping die and replacing it with another stamping module required by the terminal.

This set of stamping dies is actually a stamping platform, which is fully modularized and easy to replace.

Not long after, the extremely rhythmic voice sounded again, click, click, click...

Another type of wiring head began to be stamped again, and one by one was stamped and formed...

Red Star Factory, assembly workshop.

Lu Gang, the vice president in charge of the production process, was in a bad mood. The connector of a certain model was in a hurry.

A few days ago, the planner discovered that something was wrong. The most widely used type of connector was always missing. This is not right!
The planner was confused and full of wonder.

This kind of connector has a sufficient purchase plan and a full purchase. There should be no shortage of goods, but it is actually out of stock.

It was out of stock the day before yesterday, and the procurement planner immediately asked one of the suppliers to deliver the goods, the quantity was 5000. Fortunately, this supplier still had a certain amount of stock, and delivered the 5000 connectors in time.

Only two days later, the 5000 connectors were used up, because this kind of connector is used in a large amount, and it is used in various models. It is normal for the Red Star Factory to consume thousands of connectors every day. It will cost tens of thousands.

It was used up again, so the procurement planner had to call again and asked the following suppliers to deliver the goods immediately, but the problem came, the suppliers did not have so much inventory, and they could not send thousands of these terminals at one time come over.

If this kind of terminal is not available, the problem will be big, because it is the most used, and it is used in multiple models. Once it is in short supply, it will immediately affect multiple models that are being assembled.

The buyer planner didn't dare to hide it, so he immediately reported the problem to Lu Gang, and when he heard that it was the most widely used connector, which was used in many models, Lu Gang became anxious.

On the one hand, I personally notified the suppliers who made the connectors to deliver the goods, and on the other hand, I immediately checked the reason, what happened.

The reason was finally found out. There was a problem with the quota. Each car of a certain model needs to use 3000 pieces. As a result, a zero was missing and 300 pieces were written.

The problem was caused by the quorum staff of the assembly workshop, and it was a problem of the assembly workshop itself. Lu Gang was a little anxious, and immediately asked Chen Guihong for help. No, he went to Chen Guihong's office in person and asked for help.

"Mr. Chen, that's what happened. Because the quota was wrong, there is a serious shortage of this type of connectors."

After listening, Chen Guihongye frowned slightly, fully aware of the seriousness of the matter.After thinking about it, he asked seriously: "Mr. Lu, how many of these connectors do you need?"

Lu Gang said: "At present, this kind of connector is used in various models. It is best to purchase 10 as soon as possible. If there is no 10, at least 8 are needed."

This amount is really big.

Chen Guihong said: "The quantity is too large. No supplier can produce so many connectors in just a few days."

"Then what should we do? Our production cannot be stopped, and the Shaoshan Type [-] electric locomotive also needs to use this kind of connector."

Shaoshan Nine Types should also be used.

Chen Guihong's expression changed.Just a few days ago, Jinjiu Company did something like that, which almost affected the ribbon-cutting ceremony of Shaoshan Nine Models. Fortunately, Tang Fei was there to help.

Now, something like this happened again. He was afraid of snake bites once, and he was afraid of well ropes for ten years. Chen Guihong was worried that something would happen again.

There was really no other way, Lu Gang gritted his teeth and said, "Or, let's let those suppliers do their best to only make this kind of connector, and we'll talk about it after we get through this difficulty."

Chen Guihong immediately denied it, and shook his head lightly, "Everyone is going all out to only make this type of connector, and it will definitely affect the production of other types of connectors. This is inappropriate."

"President Chen, what should we do then!" Lu Gang was as anxious as an ant on a hot pan.

Chen Guihong thought for a long time, and slowly said: "I may have to ask Tang Fei for help in this matter. Their terminals are stamped and formed at one time, and the efficiency is very high. Maybe it should be no problem to make thousands of such terminals every day."

Thousands a day, maybe barely keep up.

Lu Gang could only nod his head helplessly, "It seems that this is the only way, let's find Tang Fei to try it together."

At this time, Tang Fei was in his factory.

Automated stamping is cool!
In just a few hours, Tang Fei produced a total of three models with more than 5000 connectors. Now, the fourth model of connectors is ready to be stamped.

Xiao Liu replaced the stamping module of this type of connector, and after trying it, he said loudly: "Boss, there is no problem, it can be stamped."

Tang Fei said: "Try stamping a few first."

"Yeah." Xiao Liu nodded, operated this punching machine, punched a few samples, looked at the stamping situation, picked up the caliper to measure the relevant size, and said happily: "Boss, it is completely qualified. .”

Tang Fei said: "Then start stamping, stamping 5000 first."

This type of connector is the most used by the Red Star Factory, and the order quantity is relatively large. Tang Fei and the others are required to make tens of thousands of them. For such a large quantity, at least 5000 should be made first.

Click, click, click...

There was a very rhythmic stamping sound, and the connectors of this type were stamped one by one, making people happy just looking at them, and Tang Fei was in a good mood.

In this way, more than 1000 rushed. At this time, two people came from outside Tang Fei's factory, wearing the work clothes of the Red Star Factory. One of them looked anxious. Look inside.

.........

Thank you for your rewards!
Thanks to "Batian Shengdi" for the reward of 200 coins, and thanks to "Brother Guihai", "hmht", "Xianzhi", "Maple Leaf...Red Bean", "★Chengnuo★", "Lights to See Others" for 100 coins each Coin rewards.

(End of this chapter)