God-level industrial master

Chapter 562 [-]% pass rate

Starting today, Shenhai City Metro Line 1 has entered the stage of joint debugging and joint testing. This is definitely a milestone day for Line 1, which means that Line 1 will soon enter the stage of trial operation.

According to the plan, at 10 o'clock this morning, a grand joint commissioning and joint test ceremony will be held at the Zhuzilin Locomotive Depot. Shenhai City attaches great importance to it, and even Vice Mayor Qiao Junpeng will come here in person.

Chen Guihong came earlier. After arriving here, he still waited and watched from time to time. He was waiting for Tang Fei's arrival. At around 9:40 in the morning, two high-end commercial vehicles drove into the Zhuzilin Locomotive Depot from the outside, not far in front of Chen Guihong. It stopped, and not only Ma Jianwei from Jiuzhou Subway Company, but also Tang Fei got out of the car.

When Tang Fei came, Chen Guihong walked over quickly with a warm smile on his face, and said loudly, "Mr. Tang, this way please."

In formal occasions, Chen Guihong usually would not call Tang Fei brother, but Mr. Tang. Under his warm invitation, Tang Fei and Ma Jianwei sat down in the reserved guest area.

The ceremony is about to begin.

At 10 o'clock in the morning, amidst the sound of gun salutes, Shenhai is the official start of joint commissioning and testing of Metro Line [-]. Qiao Junpeng made a big speech on behalf of Shenhai City. In his speech, he specifically praised Jiuzhou Industrial Group for its An important contribution made by the deep-sea metro.

After several leaders spoke, they began to formally enter the joint test of signal and locomotives. In the huge master control room, various technicians were in place one after another. Even Qiao Junpeng and Tang Fei and some other people also arrived. Witness the locomotive and signal commissioning of Line 1.

The technician in charge reported loudly: "Leaders, the joint debugging and testing work is all ready, please give instructions."

Qiao Junpeng nodded to the people of Shenhai Subway Company, and then the head of Shenhai Subway Company said loudly: "Joint debugging and joint testing, we have started now." Immediately, the technicians began to get busy.

"Start signal access!"

"Signal access successful!"

In the sound of operation, the signal of the subway locomotive was successfully connected to the network.The front of the first subway locomotive was covered with festive big red flowers. It slowly left the Zhuzilin Locomotive Depot and began to enter Shenhai Metro Line 1.

As the boss of Jiuzhou Industrial Group and the manufacturer of subway locomotives for Shenhai Metro Line 1, Tang Fei has witnessed the whole process with his own eyes, and is also very happy for Shenhai City. Line 1 has finally started joint debugging and joint testing, and the first train has begun testing. run.

This joint debugging and joint test made the headlines on the front page of "Deep Sea Daily".

As soon as Tang Fei went to work, he sat in his spacious and comfortable boss chair, picked up the "Deep Sea Daily", and immediately saw this news report rich in pictures and texts. It is the "Little White Fox" subway locomotive with big red flowers on the front.

It looks very beautiful!

Starting today, it has been put into trial operation on Shenhai Line 1, and after it, there will be many trains of subway locomotives, all of which will also be put into trial operation on Line 1.

After several months of trial operation in the future, according to the plan of Shenhai City, Shenhai Line 1 will enter passenger trial operation before the end of this year at the earliest and in the first half of next year at the slowest.

Passenger trial operation!
At that time, it means that the work is done, Line 1 will be put into use, and the citizens of Shenhai City will be able to travel in the beautiful and comfortable "Little White Fox".

Tang Fei was in a good mood. After reading the full-page report, he thought that in the near future, Shenhai City will also have a subway for citizens to travel, and they can ride the subway locomotive manufactured by Jiuzhou Metro Company.

They can also enjoy the comfortable, fast, stable, and safe subway like Changzhou City. What makes Tang Fei happy is that the construction of Shenhai Metro Line 2 is progressing relatively quickly. Shenhai City is already considering Line 2. Order subway locomotives.

There is no doubt that Line 2 will continue to use the products of Jiuzhou Metro Company, which will still be the A-type car and the "Little White Fox" subway locomotive model.
.........

336 factories.

Their production site today is very lively. Not only Yi Chunhua appeared on the production site, but also the chairman and general manager Yu Shaoguang, as well as many middle and high-level managers from Factory 336.

After Jiuzhou Heavy Industry completed the finishing of dozens of first-level fan blades last time, Yi Chunhua and the others happily returned to Factory 336, and immediately started the follow-up processing of this batch of blades without stopping.

After finishing the finishing of the airfoil, according to the process steps, there are still several finishing processes, the workload is not particularly large, and the difficulty is not high.After such a few days, the dozens of blades have completed all the processes and are neatly placed on the inspection table. Several experienced quality inspectors are carefully inspecting them.

Beside the inspection table, the faces of Yu Shaoguang, Yi Chunhua and others were filled with joy. Yu Shaoguang even said: "Thanks to Jiuzhou Industrial Group this time, otherwise our trial production of blades would not be so smooth. Maybe we still have I am struggling with the finishing of the airfoil."

Yi Chunhua said with emotion: "Yes, without the help of Jiuzhou Industrial Group, we will fall into the predicament that the processing precision cannot be achieved, and we may be helpless."

"It's all right now. After all the processes have been completed on dozens of blades, they are already finished products. As long as they pass the inspection, they can be put into storage and can be assembled into fan rotors in the future."

Everyone waited patiently by the side full of hope, and some people's eyes even stayed on the dozens of neatly arranged, very beautiful and delicate fan blades.They thought in their hearts that the blades are so exquisitely processed, so the quality should not be bad.

These quality inspectors have rich experience and are quick to move.In fact, many dimensions have been checked during the intermediate process, such as the blade shape inspection of the most difficult blades. After the blade shape is finished, it is scanned on a three-coordinate measuring instrument. It is already known that the blade shapes of these blades are all qualified. , and at least half of them have achieved excellent grades.

In this way, the inspection workload was not particularly heavy, and it did not take too long. After dozens of blades were inspected, the leading quality inspector happily reported to Yu Shaoguang, Yi Chunhua and others.

"Mr. Yu, Mr. Yi, it's really unimaginable that all the fan blades with such high requirements are qualified, and nearly half of them are high-quality products. I have worked in inspection work all my life, and this is the first time I have come across such high-quality parts. "

All qualified!

Nearly half of them are first-class products!
Hearing such words, not only Yu Shaoguang and Yi Chunhua, but also the people beside them all showed joy, and some even shouted excitedly that the processing of this batch of blades far exceeded their original expectations.

Originally, I thought it would be great if half of the dozens of blades were qualified, but I never thought that the pass rate was [-]%, and nearly half of them were top-quality products. What a happy and exciting thing this is.

Yu Shaoguang was also happy and ordered: "Old Yi, the other types of blades are also being processed quickly, and then sent to Jiuzhou Heavy Industry for finishing. We must strive to process the key and important parts of the drone engine as soon as possible. "

Yi Chunhua was full of confidence. Factory 336 only carried out the preliminary roughing and semi-finishing of these dozens of parts, and the most difficult finishing process was carried out by Jiuzhou Heavy Industry. The semi-finishing of these parts will be finished within the company, and then sent to Jiuzhou Heavy Industries.

He said loudly: "Mr. Yu, please don't worry, I will focus on the processing of these dozens of parts throughout the process, finish the semi-finishing process as soon as possible, and then send them to Jiuzhou Heavy Industries."

"In the past, I was a little worried. It was too difficult to complete the trial production of the first engine within two years. Now I am full of energy. I am sure that I will be able to make the first engine next year."

Yu Shaoguang said: "It took us less than two years to manufacture such an advanced engine. This is something to be proud of. Lao Yi, let's work together, roll up our sleeves and work hard, and make the first engine as soon as possible. Then it was delivered to Jiuzhou UAV Company, and I heard that whether it is in Jiuzhou Industrial Group or in the aircraft body manufacturing factory, their progress is also very smooth, and we cannot lag behind them."

The first batch of fan blades consisted of dozens of pieces, all of which were qualified for storage. The 336 kilograms of single crystal superalloy materials that 100 Factory Cheng had brought back from Jiuzhou Heavy Industries have also begun to be put into use, and have reached the rough state of parts. Preliminary machining will then begin, followed by semi-finishing and finally finishing.

.........

Jiuzhou Industrial Group,

Tang Fei received a good news call from Yu Shaoguang himself. During the phone call, Yu Shaoguang told Tang Fei enthusiastically that the dozens of fan blades processed by Jiuzhou Heavy Industry Factory 336 had completed the follow-up finishing process and had all been qualified for storage. .

Hearing such good news, Tang Fei was in an unprecedentedly good mood. He thought in his heart that the trial production of the drone is now going very smoothly, as if it has been suspended.

By next year, the first drone will definitely be manufactured, and Tang Fei is full of expectations.

Today, Tang Fei also received a call from Sun Zhengfei. During the call, Sun Zhengfei first asked Tang Fei if he was free tonight. He expressed that he would like to invite Tang Fei to dinner.

Tang Fei didn't take it too seriously, and didn't think about it, because it wasn't the first time Sun Zhengfei invited him to dinner.Tang Fei fully agreed that he has time tonight.

Sun Zhengfei immediately told Tang Fei where to eat, and said that he would go there in advance and wait for Tang Fei to come over.
Before leaving get off work, Tang Fei called Li Xueyan and told her that he would not come back for dinner tonight, and then Xu Guangming drove to the high-end restaurant that Sun Zhengfei mentioned.

In the box, Sun Zhengfei was already waiting there.

The relationship between the two is good, and they chatted enthusiastically when they met, and the atmosphere was pleasant.After chatting for a while, Sun Zhengfei took the initiative to mention the Bangkok subway project. At this time, Tang Fei's heart moved slightly, and he guessed that Sun Zhengfei's invitation to dinner tonight should not be just a simple gathering of friends, there might be something going on.

....
Today is the third update, and the first update is here!

The second is a little later, there are too many things to do today, and Chapter 2 can only be coded after dinner.

(End of this chapter)