God-level industrial master

Chapter 629 The Mysterious Big Guy
For the time being, no one has noticed the abnormality in this private house.

And in this room, a telescope was set up a few days ago, and it has been quietly looking in the direction of the gate of the Jiuzhou UAV factory, and has been quietly watching the movement there.

Today, a convoy of several large trailers arrived at the UAV factory area and was slowly driving into the factory area through the gate. It was covered tightly with a cloth, and no one knew what it was.

There are two people in this room, all with Western faces, they happened to see this scene of the Dachang Gate in the distance through the binoculars, and one of them, a foreigner, even exclaimed, "Oh, God, what is that! "

Another foreigner hurried over and immediately looked in front of the telescope. After looking at it for a while, his face was serious, and he said slowly: "I'm sure, it's definitely not a machine for manufacturing drones."

Another foreigner nodded in agreement.

If it is mechanical equipment, it is generally used in a large wooden box with a length, width, and height of several meters. Even if it is tightly covered with a tarpaulin, it is also boxy in appearance. It looks relatively regular.

And the things on these large trailers are obviously irregular in shape, which looks a little weird, and it is basically certain that they are not machinery and equipment for manufacturing drones.

Is it...

The two foreigners looked at each other, then nodded slowly. The two seemed to have guessed something. One of them pushed the high-definition camera over and pointed the lens at the gate of the Jiuzhou UAV factory. The situation of these large trailers was photographed.

These large trailers are carefully and slowly driving into the drone manufacturing plant area. The speed is not fast, as if they are afraid of bumping into the things carried on the vehicles.

Fortunately, the factory gates are big and wide enough, and they can drive unimpeded. After entering the factory area, the roads in the factory are very spacious and straight, even if they transport larger things, there is no problem at all.

The destination of these large trailers was very obvious. After driving into the factory area, they drove along the straight and spacious avenue in the factory area to the front of the largest building in the factory area.

This huge building is the final assembly plant of the drone. It has been capped a month ago, and now it has entered the installation of some facilities in the plant, including water and electricity facilities, central air-conditioning systems, and so on.

The ground in the factory building is no longer a rough concrete floor, but a clean and beautiful epoxy resin wear-resistant floor. The whole floor is clean and very beautiful, and shadows can be cast.

The gate of the final assembly plant opened slowly, and these large trailers drove into the plant, and then, the gate of the plant closed slowly again. Basically, few people knew what was being transported.

Liang Xiaofeng and several other people were already in the final assembly plant. When they saw these large trailers driving in and the things on them, they breathed a long sigh of relief. The things finally arrived.

.......
Jiuzhou Industrial Group.

After reading the September report, Tang Fei was in a good mood. According to the current development pattern, there is no problem with Jiuzhou Industrial Group's total revenue exceeding US$9 billion this year.

In addition, when Tang Fei was at work this morning, he also received a call from Ding Liang, the general manager of Jiufang EMU. He reported to Tang Fei on the phone that the 200th train of the JF10A EMU had successfully landed, which is also the 32nd train. The seventh train in the EMU order.

After this train is handed over, it will also run on the Beijing-Changjiang Line, and it is also the seventh JF7A EMU operated by passengers on the Beijing-Changjiang Line.

Of the three JF3A EMUs that were manufactured in the earliest period, two trains will continue to run on the Beijing-Changjiang Line and one train will run on the Xin'an Line. The three trains will return to Jiufang after the total mileage of the three trains reaches 200 million kilometers. The EMU company conducts inspections and overhauls, and then delivers them as three of the 3 EMUs.

Ding Liang also reported to Tang Fei that the production and trial production of the JF160A EMU has been fully launched, some large components have entered the production and manufacturing stage, and the procurement of all purchased parts has also started.

All these purchased parts are purchased domestically, without any imported parts, and the JF160A EMU will be 100% localized.There are some spare parts that need to be imported, but Jiufang Motor Vehicle Company has provided the production and manufacturing technical data, and has sought some domestic manufacturers for production.

After receiving Ding Liang's call, Tang Fei was very relieved about the development of Jiufang EMU.Perhaps, before the end of this year, it should be possible to complete the production and manufacture of more than a dozen trains for 32 EMU orders.

After reading the report for September, Tang Fei closed the report with satisfaction, thinking in his heart that among the subsidiaries of Jiuzhou Industrial Group, Jiuzhou Electronics Company is still the leader.

The company's chips have been in short supply, and with the rapid growth of mobile phone shipments in the world, Jiuzhou Electronics' revenue has also increased.

In addition, the development of Jiuzhou Metro Company is also good. This year, it will rank second among its subsidiaries. In particular, it has successfully won the order for the Bangkok subway project in Thailand. After the order for the London subway project, there is no need to worry about the order for a long time in the future. If you have any problems, just bury your head in production and manufacturing.

It is worth mentioning that the subway locomotives for the London Underground project manufactured by the European factory of Siemens Vehicle Group have entered the stage of full-scale production. Perhaps in the near future, the first subway locomotives for the London Underground project will successfully land there. .

"Boom, boom, boom!"

There was a knock on the door of the office, and Xu Guangming came in and said, "Boss, the car is ready, shall we start now?"

Tang Fei stood up, waved his hands in a good mood and said, "Go, we're leaving now."

Today, Tang Fei will go to the drone manufacturing plant in Guancheng City, because a batch of very important things should arrive, and Tang Fei is going to take a look for himself.

In addition, the last time I went to the drone manufacturing factory was in September, and it was already a month later. Tang Fei thought in his heart that the changes there should not be small in a month.

Tang Fei strode ahead, Xu Guangming followed, and the two left the Jiuzhou Industrial Group headquarters one after the other, entered the elevator and went directly to the underground garage of the International Finance Building.

A lot of cars are neatly parked in this huge underground garage. One of the areas is exclusive to Jiuzhou Industrial Group. There are also a lot of cars parked there, some of which are luxury cars. Tang Fei's car has Several cars.

Today, Xu Guangming prepared a brand new imported car for Tang Fei, bulletproof. I heard that the presidents of many countries choose this car as their car.

"Boss, please get in the car."

Xu Guangming opened the car door, and after Tang Fei got into the car, he opened the co-pilot's door again, and he drove to the drone production factory in Guancheng City.

After exiting the International Finance Building from here, drive towards Guancheng City.It has to be said that it is very wise for Jiuzhou UAV Company to choose Guancheng City, and it is very convenient to go there.

About an hour later, Tang Fei arrived at the manufacturing plant of Jiuzhou UAV Company, and slowly drove in from the factory gate.

Sitting in the car, Tang Fei looked at the factory area with satisfaction through the window glass, thinking in his heart that there has been a lot of changes in a month.

When I came last time, the factory area was just beginning to take shape, but now everything looks decent. The large factory buildings are neat and beautiful, and the greening work has basically been completed. Many flowers and trees have been planted in the factory area. Sod is also laid on the ground.

Even though he didn't go to every factory building to take a look, Tang Fei had already noticed that at least three or four factories had entered the stage of equipment installation and commissioning.

A few buildings have not yet entered the equipment installation and commissioning plant, and they are about to complete the installation of the facilities in the plant, and will start the installation of production and manufacturing equipment soon.

Xu Guangming didn't stop, just slowed down, and drove along the straight and spacious avenue in the factory area towards the huge UAV assembly plant in the distance.

Several large trailers were coming out of the factory building. They had finished unloading and were about to leave the factory area.This convoy of several large trailers passed by Tang Fei's car, and soon they would leave the gate of the factory area.

Tang Fei's car drove to the gate of the UAV assembly plant.

Xu Guangming parked the car and said softly, "Boss, we've arrived."

Tang Fei nodded, opened the door and got out of the car. As soon as he got out of the car, he saw several people coming out of the assembly plant, led by Liang Xiaofeng, and the others were all middle and high-level people from the drone company.

Liang Xiaofeng saw Tang Fei getting off the car, and walked over happily, "Boss, you're here so soon."

Other people also followed and greeted Tang Fei one after another.

Tang Fei waved his hand and said: "All the things have arrived, let's go, I want to go in and take a look at these things."

Liang Xiaofeng reported: "The things have arrived, the trucks have been unloaded, and they are being placed in the final assembly plant."

As he spoke, he accompanied Tang Fei into the factory building, and the others followed, and everyone walked into the huge assembly factory building together.

As soon as he entered, Tang Fei's eyes lit up slightly.

What I saw in front of me was in stark contrast to what I saw when I came here a month ago. The biggest change is the floor in the factory building. A month ago it was a cement floor. Now it is a clean and beautiful epoxy resin floor, which is very smooth. Can show people.

Tang Fei also saw that some installation workers were busy installing all the facilities in the factory building, including the water and electricity system, air conditioning system and so on in the factory building.

The factory building is very huge. Because there is no equipment installed for the time being, the factory building is completely empty. Tang Fei saw those big guys placed on the open space of the factory building at a glance.

Immediately, Tang Fei's pace accelerated invisibly, and he walked towards these big guys who had just arrived...
.......
Today is the third update, and the third update is here!

(End of this chapter)