God-level industrial master

Chapter 630 Americans' Worries
Tang Fei walked in front quickly, and everyone followed, and soon came to the front of these things.

Not long after they were unloaded from those big trailers, the tarpaulins covering and binding them had not been untied, and they were still tight.Others may not know what these things are, but Tang Fei, Liang Xiaofeng and others know it clearly.

These things have been waiting for a long time.

They were transported all the way from the northwest region, and finally arrived at the Jiuzhou drone factory area smoothly. Tang Fei felt relieved when he saw these things.

The airframe parts for the first drone have arrived.

They are manufactured by a very powerful aircraft factory in Northwest China. They were manufactured early last month. Then, a joint expert group was established by the military and Jiuzhou UAV Company, and the on-site inspection was carried out there. The things are completely complete. Qualified, excellent production.

After the inspection and acceptance was completed, these items were directly loaded there, and finally arrived at Jiuzhou UAV Company after traveling thousands of miles.These things are very large, and some are as long as 30 to [-] meters.

Tang Fei was still a little worried about such a long-distance transportation, so he called Liang Xiaofeng for advice, and also called Zhu Yong and the others himself.

Things finally arrived!

Seeing them, Tang Fei waved his hand and said: "Untie the tarpaulin, and arrange for our quality inspectors and technicians to jointly inspect and accept it, mainly to check whether there is any damage or bump during transportation."

Liang Xiaofeng made arrangements immediately.

Soon some people came, including several backbone technicians and experienced quality inspectors. Everyone began to untie the tightly covered and bundled tarpaulin. Gradually, the first large part was exposed. lost its true face.

This is the tail of the drone!

As the tight tarpaulin on the first large part was untied, and then all the other tarpaulins were also untied, and these things were unreservedly displayed in front of everyone.

They have the wings of the drone, the body structure of the drone, and the landing gear of the drone, etc. The body parts of the first drone are basically complete.

In the future, they will be assembled in this large factory building and be assembled into the first drone.

Seeing these things, everyone showed joy, and Liang Xiaofeng even waved his hands: "Immediately conduct a visual inspection, and the boss needs to know the inspection results."

These parts have been inspected in detail in the factory and have also completed the joint acceptance of the expert group, so there is no need to inspect some dimensions and technical conditions.

What we have to do now is to check the appearance, mainly to see if there are bumps and other situations during the long-distance transportation.These key technicians, as well as a few experienced quality inspectors, immediately went into action and began to carefully inspect these parts.

Tang Fei walked over and checked these parts with great interest. After looking at them, Tang Fei looked satisfied. These parts were well protected during transportation without any bumps.

Sure enough, not long after, a key technician came to report: "Chairman, Mr. Liang, according to our inspection, these parts are intact."

Tang Fei nodded in satisfaction, and then said: "Then cover the tarpaulin again to protect it."

The final assembly of the drone will take some time, at least until the basic construction of this factory building is completed. These parts may be placed here for a while, and it is necessary to cover it tightly with a tarpaulin.

Then, accompanied by Liang Xiaofeng and others, Tang Fei visited the assembly plant under construction, and then visited some other plants.

Some factories are progressing very fast, and the fastest factory building is already in a decent shape, and many manufacturing equipment have been installed in place.

Liang Xiaofeng Hui reported: "Boss, in more than a month, around the beginning of December, we will start the production of some parts of the drone."

At that time, the production of some parts can indeed start, and by the beginning of next year, the full-scale production of various parts of the drone will start here.

At that time, the first drone will also be assembled in the drone assembly plant.

Tang Fei asked: "The hardware facilities are already very good, and the software facilities must keep up, such as the construction of the talent team, the improvement of the corporate structure, etc."

Liang Xiaofenghui reported: "Our technical staff team has reached a scale of three to four hundred people. After the technical staff team is completed, the total number will reach more than 400 people."

The manufacturing of drones is a technology-intensive industry that requires a large number of technicians.Liang Xiaofeng and the others got off to a good start, and have already formed a team of hundreds of technicians.

He continued to report: "We have also recruited some management personnel, various production workers, auxiliary personnel, etc., and will hold a large-scale talent recruitment fair next month. Before starting the production of some parts, Jiuzhou has no The total number of employees of the man-machine company can reach about 3000 to [-] people, and the personnel structure can be initially improved...."

Tang Fei listened carefully to Liang Xiaofeng's report, and was very satisfied with their work. He basically seldom worried about it. Liang Xiaofeng and the others did a good job.

After visiting several manufacturing plants under construction, Tang Fei, led by Liang Xiaofeng, went to the warehouse with a construction area of ​​nearly [-] square meters.

Various spare parts of drones are mainly stored here, including purchased parts purchased from the market, as well as various spare parts manufactured by various suppliers in the future.

As for the finished drone, it will be towed to the nearby supporting airport after it is manufactured, and parked on the apron of the airport.

The construction of this large warehouse is progressing well, and it is basically completed. A lot of parts have been stored in it. Imported spare parts purchased from overseas.

Many spare parts are already in place, Tang Fei thought in his heart, in three to five months, the final assembly of the first drone will be able to start.

After visiting the manufacturing plant of drones and seeing this large warehouse, Tang Fei walked into the office building of the factory at the invitation of Liang Xiaofeng.

Although this office building is not big, it is very beautiful and fashionable. It has a beautiful glass curtain wall on the outside, and the interior decoration is also very good. It can probably accommodate hundreds of people.

The decoration here has been completed, and there is a taller and bigger building next to it, which is still being renovated. It is the technology research and development center of Jiuzhou UAV Company, which can provide at least 1000 people to work on technology research and development there. .

The technology research and development center is still under renovation, the office building has been renovated, and Liang Xiaofeng and others have started working in this building.

Tang Fei entered Liang Xiaofeng's office.

In the office, Liang Xiaofeng not only gave a detailed report to Tang Fei on some of the work of Jiuzhou UAV Company, but also said some of his plans and plans.

Liang Xiaofeng said that after the first drone is manufactured, he wants to make a large attack drone, preferably a large attack drone with a long range, all-weather, and stealth.

Hearing that Liang Xiaofeng had such an idea, Tang Fei smiled happily.

Some of Liang Xiaofeng's ideas coincide with Tang Fei's. Tang Fei also has the same plan. In the future, he plans to produce large-scale attack drones, which will be developed by the system. The world's most advanced attack drones.

And attack drones will be divided into multiple types. In Tang Fei's vision, these attack drones will include strategic bombing type, attack fighting type and other types.

.....
US military.

In a certain high-level meeting room, a high-level meeting is being held, and all the participants are senior personnel of the US military, including several generals.

They received information from the spies lurking in China, and the big screen in the meeting room was scrolling and displaying color photos one after another.

It can be seen from these photos that a convoy of several large trailers, full of big guys, covered and bundled tightly with tarpaulins, is driving into the manufacturing plant of Jiuzhou UAV Company .

The US military general who presided over the meeting had a serious expression, "Gentlemen, you may have guessed what these vehicles are carrying. Yes, they should be some large parts of drones."

Many people's faces changed slightly.

The U.S. military general was very worried: "It seems that the progress of this UAV of the Chinese military is much faster than we imagined, and the production of some large parts has been completed."

They already have a basic understanding of the performance of this large drone, and after a lot of effort and a lot of money, they finally got this drone back a few months ago the introduction information.

It can be seen from this introduction that this large UAV is a reconnaissance UAV, and its performance is comparable to their "Global Hawk" UAV.

They originally thought that the development and production of such an advanced drone would be extremely difficult, and it would take at least five or six years for China to produce the first engineering prototype, but the actual situation was much slower than they had guessed. much faster.

After the U.S. military general finished speaking very worriedly, he called up a relatively clear satellite picture himself. This is a picture of the Jiuzhou UAV company's manufacturing plant taken from a high altitude by a reconnaissance satellite.

He said with a solemn expression: "Jiuzhou UAV Company's factory construction is very fast. This is the latest satellite picture. Look at this picture again. It is a picture from two months ago."

Judging from the comparison of these two pictures, the changes in the factory area are indeed great, and it can be clearly seen that the construction of the Jiuzhou UAV factory area is progressing rapidly.

They may already know that in a few months, the production and manufacturing plant of Jiuzhou UAV Company will be fully constructed and the production of drones will begin.

.......
Today is the third update, and the second update will be delivered!

(End of this chapter)