God-level industrial master

Chapter 655 The first drone enters assembly
Tang Fei was picking up the internal phone on his desk, ready to call Wang Hailong and Yang Chenglin in.

Now that he has set the goal of achieving a total revenue of 160 billion US dollars this year in his mind, Tang Fei will call in his two capable generals, give a good account and give them instructions.

When it first entered the New Year's Day of 2004, Tang Fei once discussed this matter with Wang Hailong. At that time, Wang Hailong conservatively predicted that there should be no problem in achieving a total revenue of 150 billion US dollars this year.

Tang Fei added 10 billion US dollars on this basis, and initially set a total revenue target of 160 billion US dollars this year.

Such a goal should be achievable. Tang Fei even thought that he might be a little conservative, but he didn't want to set the goal too high and put a lot of pressure on everyone.

In addition, although Jiuzhou Industrial Group has developed well, it has basically developed smoothly in the past few years, but with the expansion of scale and rising influence, it will inevitably arouse the jealousy of some people and forces. There are some risks and difficulties. Unpredictable at the moment.

In order to include the unknown difficulties and risks, Tang Fei only conservatively set this year's goal at 160 billion US dollars, striving to enter the top 500 of the world's top 350 companies.

Just as he was picking up the phone on his desk, Tang Fei's cell phone rang.

Tang Fei shook his head lightly, thinking to himself, whose call is this, it's such a coincidence.Taking out his mobile phone, he couldn't help laughing.

This is Zhang Ping calling from the capital.

"Mr. Tang, Happy New Year, your Jiuzhou Industrial Group has already gone to work."

Tang Fei said: "Director Zhang, happy new year. We are fully back to work, and the subsidiaries below have also fully entered the state and started the production of a large number of products."

Zhang Ping and Tang Fei chatted briefly for a while, mainly to greet, and also briefly asked about the development of Jiuzhou Industrial Group, especially congratulated Tang Fei again, and wished Jiuzhou Industrial Group successfully entered the list of the world's top 500.

After chatting for a while, Zhang Ping said with joy in his tone, "Mr. Tang, I have some good news for you. Our second engine has already entered the assembly stage at Factory 336."

This is really good news!
Tang Fei's mood suddenly improved unprecedentedly, and a happy look appeared on his face.Because this engine is no longer a verification machine, but an engine that will be officially delivered to Jiuzhou UAV Company.

The first engine is a verification machine, which is mainly used for design performance verification.This engine will be officially assembled on the first drone.

When the first engine completed its final assembly and entered the test run, Tang Fei went to Factory 336 in person to see the first test run of the engine.

At that time, Yu Shaoguang told Tang Fei that many parts of the second engine were basically manufactured, and the engine should be assembled after the Spring Festival.

They walk the talk.

No, to be precise, it was a little earlier than the original promise. Before the Spring Festival holiday was completely over, they had already started the assembly of the second engine.

Hearing such good news, Tang Fei immediately became happy.

"Director Zhang, the 336 factory is really powerful. I was worried that their second and third engines might not be able to keep up with our progress. I didn't expect that the second engine had already started to enter. assembly."

"Yeah, their performance is really good. I heard that they started working overtime on the third day of the Lunar New Year. It's amazing."

The two chatted happily on the phone, and then, Zhang Ping also asked about the situation of Jiuzhou UAV Company's first drone with concern.

Tang Fei told Zhang Ping clearly that the assembly of the first drone will begin in early March.

It is now mid-February, and there are only a dozen days before March.Receiving Tang Fei's affirmative answer, Zhang Ping also became happy, "Mr. Tang, is this true?"

"It's true, our UAV final assembly plant will be completely completed soon, and then we can start the final assembly of the first UAV."

During the entire Spring Festival, Jiuzhou Industrial Group is basically on holiday, with only a few exceptions, including the construction of the UAV assembly plant.

This huge factory building is undergoing the final process, mainly some finishing work. The workers and technicians there only have three or four days of rest during the Spring Festival.

The hard work has finally paid off, and the factory building will be completely completed in about half a month and will be put into use.Tang Fei also told Zhang Ping confidently that in early March, Jiuzhou UAV Company started the assembly of the first aircraft.

All is ready except for the opportunity.

All the parts of the first UAV are in place, and even some parts of the second UAV have begun to be manufactured.At present, we are just waiting for the completion of the final assembly plant.

After getting a positive answer from Tang Fei, Zhang Ping said: "Great, this is really exciting news. I will report it to Minister Tang immediately."

If Tang Guoqiang knew the good news, he would probably be very happy too.

"Mr. Tang, when the first drone enters assembly, I must come and take a look."

Tang Fei said: "No problem, I will inform you when the time comes, you are welcome to bring."

After answering Zhang Ping's phone call, Tang Fei made a cup of tea himself, and stood in front of the large French window of his office with the cup of tea in his hand, looking through the glass and looking into the distance.

Tang Fei thought in his heart that the drone is finally about to enter a substantive stage, everything is ready, and the only thing left is Dongfeng.Our first drone is about to start assembly.

This is a large UAV that is comparable to the American "Global Hawk" UAV. In addition to not having attack performance, it will be better than the "Global Hawk" UAV in terms of the longest range, the longest stay in the air, and resolution. Global Hawk".

The first drone will enter the assembly phase.

For this drone, the military has been looking forward to it for a long time.

After Zhang Ping reported to Tang Guoqiang, the high-level military quickly held a special meeting.On the one hand, the latest progress of drones was conveyed at the meeting, and on the other hand, it was announced that the entire drone project will continue to be kept secret, and it will not be partially declassified until the first drone successfully flies into the sky. Disclose the existence of this drone to the outside world.

At present, this drone is still in the secrecy stage, and most people in China don't know the existence of this drone, let alone understand its performance.

Proper disclosure of its existence is mainly to deter some Xiao Xiaoxiao and enhance the deterrent effect of the military.

Ten days passed in a flash.

The time has entered the beginning of March.

During the period from the Spring Festival to the beginning of March, the first engine of the 3 factory successfully entered the 336-hour long-term assessment and test run stage. At present, this engine is being tested on the test bench, and its performance is still very good.The second engine has completed the assembly of some parts, and the progress is relatively smooth.

What about Jiuzhou UAV Company?

During this period of time, which is more than ten days, they finally successfully completed all the finishing work of the UAV assembly plant. The entire assembly plant has undergone a major change, and the first UAV is about to enter the assembly stage. .

Aircraft assembly is an important part of aircraft manufacturing, and drones are the same.

It is also the process of locating each part or assembly accurately with each other according to product technical requirements, and assembling parts or products with prescribed connection methods.

The structure of an aircraft is different from general mechanical products. During its assembly process, it cannot rely solely on the processing accuracy of the shape and size of the parts to ensure that qualified assemblies and components are assembled.Therefore, in addition to using various general-purpose machine tools, common tools and test equipment, it is also necessary to develop special assembly process equipment for components and components of different models.

Such as assembly frame, mating frame, finishing frame, wall panel assembly fixture, etc.These special production equipment are used to complete the assembly of aircraft products from components to components and the general assembly process. Generally, the larger ones are called assembly jigs, while the smaller ones are called assembly jigs. There is no strict and clear boundaries.

Jiuzhou UAV Company's aircraft assembly plant has a large number of assembly process equipment, all of which are designed by the system and manufactured by some very powerful manufacturers outside.

In the factory building, not only all the assembly process and equipment are in place, but also other equipment are in place, and the whole factory building is ready.

The first drone will begin to enter the assembly phase.

Early this morning, Xu Guangming drove out of the big villa. Instead of going to Jiuzhou Industrial Group, Tang Fei went directly to DZ City to Jiuzhou UAV Company.

Next, Tang Fei's work will also focus on Jiuzhou UAV Company, to be precise, the assembly of the first UAV.

Before ten o'clock in the morning, Tang Fei had already arrived at his destination. At the gate of the factory, Liang Xiaofeng and others from Jiuzhou UAV Company were already waiting there.

"boss."

"Boss, hello!"

When Tang Fei got out of the car, everyone greeted Tang Fei one after another, all with excited faces.No way, the first drone began to enter the assembly stage, and everyone felt uncontrollable joy in their hearts.

"Come on, let's get in the car and go to the assembly plant!"

After entering the gate of the factory area, several convertible cars have already parked there. They are a bit like sightseeing cars in the scenic area, and they are also driven by electricity.

Everyone got into the car one after another and headed directly to the UAV assembly plant.

The factory area has been completely completed, and the greening work has been done well. It is completely a modern garden-style factory.Sitting in the car, looking at everything in the factory, Tang Fei nodded from time to time.

Liang Xiaofeng sat next to Tang Fei, and he introduced the current situation of the factory to Tang Fei.

The factory area is very large, and the area of ​​each factory building is also large. The roads in the factory area are also spacious and straight. The entire factory area covers an area of ​​nearly 2000 acres. If the adjacent supporting airport is included, the area is much larger. .

Even by car, it took several minutes to reach the gate of the huge aircraft assembly plant. In order to welcome Tang Fei, the gate of this large plant has been opened.

Tang Fei looked into the factory building through the open door, and felt satisfied when he saw some conditions inside.As soon as the car came to a complete stop, Tang Fei got out of the car first, walked in the front, and walked towards the inside of the factory building.

……

Today is the third update, and the third update is sent, thank you everyone!
(End of this chapter)