God-level industrial master

Chapter 656 The Americans Feel A Little Scared

When Tang Fei walked into this large factory building, his first feeling was that the changes here were really great!
Everything is in place, whether it is the equipment required for assembly or the various tooling required for assembly, all are in place.

A lot of assembly workers and technicians could already be seen in the factory building. Interestingly, Tang Fei also saw some technicians from Northwest Aircraft Manufacturing Company.

The Northwest Aircraft Manufacturing Company mainly undertook the production and manufacture of the body parts of the first drone. Tang Fei promised that when the first drone entered the assembly stage, they could send some technicians to learn the assembly process technology.

By doing this, of course, they want to help the Northwest Aircraft Manufacturing Company, improve their aircraft assembly technology level, and let them get in touch with the aircraft assembly process produced by the system.

In addition to these technicians who came to learn the technology, the technicians of Jiuzhou UAV Company have begun to guide the assembly workers to start the assembly of the body parts of the drone.

According to the assembly process, the assembly of the UAV is divided into two stages, the first is the assembly of the body parts, and then the installation of various systems in the aircraft body.

Looking at everything in front of him, Tang Fei said with satisfaction: "Old Liang, you have done a good job. Our drone assembly plant has been completely completed and can be put into use."

Liang Xiaofeng said: "Yes, it has been completely completed, and now we have started the assembly of the body parts of the first drone."

"Come on, let's take a look at the assembly situation."

Tang Fei strode ahead like a shooting star, and Liang Xiaofeng and others quickly followed.Tang Fei walked to one of the assembly stations, where some components of the drone were being assembled.

In the assembly process of drones, most of the parts or components are relatively independent. After they are assembled, they are assembled, that is, the final assembly of the aircraft.

Generally, the parts are assembled into relatively simple assemblies first, and then gradually assembled into more complex parts, and finally the whole drone is assembled by docking of parts.

This drone is designed and developed by the system, fully considering the requirements of use, maintenance and production technology. The whole aircraft body can be decomposed into many assembly units of different sizes, that is to say, the aircraft body is composed of many Assembly unit composition.

The production site is conducting the pre-assembly of the drone, that is, some parts are first assembled into relatively simple components, and then these components are assembled into more complex components, and then the components are combined into assembly units, and finally these components are assembled. Units are combined to form the entire drone.

In front of Tang Fei, workers were assembling the wings and ailerons under the guidance of technicians.It can be seen that although these workers are not proficient in assembly, they are very serious and meticulous, and they are assembling in strict accordance with the requirements of the assembly process.

It doesn't matter if you are not proficient now. After the transfer of the first drone, the workers will gradually become proficient in the assembly work.The key at present is to assemble in strict accordance with the technological process and requirements, without the slightest sloppy.

Tang Fei nodded reassuringly, but still told him: "Old Liang, this is our first drone. We must put quality first, and we must strictly follow the process steps and process parameters for assembly."

"Boss, please rest assured that we will assemble in strict accordance with the process requirements." Liang Xiaofeng agreed without hesitation.

The assembly process of the drone comes from the system. No one knows better than Tang Fei how scientific and reasonable the assembly process is, and how amazing it is. As long as the assembly process is strictly in accordance with the process requirements, there will be no problems.

At the assembly site, Tang Fei not only saw some components being assembled, but also saw a lot of body parts placed on the production site.

For example, the skeleton components of the airframe, which are composed of ribs, partitions, frames, etc., were manufactured by Northwest Aircraft Manufacturing Company and arrived here as early as last year.

The skeleton of the body is divided into several sections, that is, several units. The skeleton of these body parts will be assembled and positioned in the frame, and then the skin or plates will be installed on the skeleton, and finally they will be connected to the skeleton by riveting. Together.

At the entire production site, not only some parts have been assembled, but all the body parts of the first drone have been put in place and placed on the assembly site.

Liang Xiaofeng reported: "Boss, the assembly process is relatively smooth so far. If there are no accidents, we will be able to enter the final assembly of the aircraft in April or May."

The final assembly of the UAV is to install various systems into the body of the aircraft after the assembly of all component units, including the avionics system, infrared imaging system, optical imaging system, etc., and even the power system of the aircraft. Just two great engines.

Tang Fei nodded slightly.

Because Tang Fei knows that as long as they are assembled in strict accordance with the process requirements, there will be no problems in the assembly process. The assembly of the first drone should be able to start in April or May.

In the UAV assembly plant, Tang Fei looked very seriously and carefully. He stayed for more than two hours, had dinner at Jiuzhou UAV Company at noon, and visited the supporting airport in the afternoon.

The construction of the airport is also progressing relatively quickly. The paving of the runway has been completed. There are two long and wide runways. Not only can the current large UAV take off and land here, but even if larger UAVs are produced in the future, they will You can also take off and land here.

The airport is still under construction, and some ancillary facilities need to continue to be built, including the drone control center at the airport.

The world's most advanced and high-tech drone control equipment will be installed there, where it will control the take-off of the drone and conduct remote control of the drone.

Such a control center is planned to be built in many places in the future, all located in military bases, mainly for remote control of drones.

.......
America, thousands of miles away.

After the U.S. military convened a high-level meeting to discuss several issues, they mentioned Jiuzhou Industrial Group and the production of this UAV in Huaxia.

"Everyone, we are very scared by the development of Jiuzhou Industrial Group. Last year, they successfully entered the top 500 in the world, ranking 109th with a total revenue of 478 billion US dollars."

"If they develop at this rate, in a few years, they may become one of the top 300 or even top 200 in the world. A Chinese company, especially an industrial group that has mastered a lot of core technologies, allows them to rank among the world's top 200 companies. One of the top [-] is definitely not good news for us."

"What worries us even more is the unmanned aerial vehicle developed and manufactured by Jiuzhou Industrial Group. You have basically understood its performance. There is basically no difference in technology and performance between man and machine.”

"It's very bad for us that their drone manufacturing plant has been built, and according to some intelligence, they may have started the assembly of the first drone."

An American general said with a very serious expression: "It's a little unbelievable. Their speed is so fast that we feel a little scared."

Some people also prayed, God bless, I hope they encountered many technical problems in the assembly process of the first drone, the whole process was bumpy, and it would take five or eight years to get the first drone Manufactured.

Since they learned that Jiuzhou UAV Company is developing this drone, they have been very concerned about it, and now they feel even more pressure and a little worried.

Jiuzhou UAV company's speed is too fast.

Jiuzhou UAV Company is a wholly-owned subsidiary of Jiuzhou Industrial Group. Jiuzhou Industrial Group has successfully entered the world's top 500. Americans also feel a little scared. They don't want such a company to rise in China. They began to discuss , What measures will be taken to curb the development of Jiuzhou Industrial Group.

……

Tang Fei may know that Americans are concerned about Jiuzhou Industrial Group, and also know that Americans are worried about their first drone, but Tang Fei will not care about Americans' thoughts and feelings.

You must work hard to develop yourself, and you can't look forward and backward.Tang Fei deeply understands that without strong strength and scale, everything is empty talk, and you can play as others want.

Of course, Tang Fei didn't know yet that the Americans were already considering how to sanction themselves, with the purpose of curbing the development of Jiuzhou Industrial Group.

Tang Fei doesn't know these things yet.

In the office, Tang Fei answered a call from Liang Xiaofeng. He reported the progress of the assembly of the first drone. Since the first drone entered the assembly stage more than ten days ago, Tang Fei would go to Dongguan every three to five days. Take a look at the city.

But I didn't go today, but I need to go to the airport to pick up someone.

After answering Liang Xiaofeng's call, Tang Fei nodded in satisfaction, then got up and left his office, preparing to go to the airport.

……

Today is the third update, and the first update is here!

(End of this chapter)