Rebirth 05 Be a car tycoon

Chapter 150 Milestones in New Factory Construction

Yang Gengen and Xu Xianbo of Yangzi Die Casting Factory basically ate, drank and lived in the Mingzhou factory of Nanshan Automobile during this time.

Due to time constraints, the first prototype of the 4000-ton die-casting machine was directly carried out in the Mingzhou factory.

In this way, as long as there is no problem with the prototype, it can be put into the trial production of the new model immediately.

Will not delay the preparation of the 5.7L engine.

"Go a little to the left!"

"A little further to the right!"

"Okay! Put it down!"

Xu Xianbo held a loudspeaker and personally directed the workers to lift the components of the die-casting machine.

Ordinary die-casting machine, there is no special difficulty.

There are not to mention dozens of enterprises that can produce domestically, but there are still some ten or eight.

But when the die-casting tonnage reaches the level of 4000 tons, the situation is different.

Except for a few special units that may have special equipment for the production of large die-casting parts, none of them can be found on the market.

Even if some special vehicles have this requirement, there is a high probability that the parts will be divided into two parts, or even divided into three parts to reduce the difficulty of processing.

Otherwise, if it is integrally formed, the requirements for equipment and molds are very high.

For example, the current 4000-ton die-casting machine is nearly two stories high and occupies an area of ​​more than 50 square meters.

If you count the area occupied by the auxiliary equipment, it is more than [-] square meters.

For such a large piece of equipment, whether it is transported or installed, there are many issues that need to be faced.

Otherwise, Yang Gengen and Xu Xianbo would not have stayed here directly.

"Mr. Xu, according to this progress, when will the installation of this die-casting machine be completed?"

As the head of the procurement department, Wang Fugui is naturally very concerned about the introduction of new factory equipment.

Otherwise, if there is a problem at that time, it will not only be the problem of the equipment manufacturer, but also the purchasing department.

"All the components are in place, and our workers are divided into three shifts. If we don't stop day and night, the installation can be completed in three days.

However, after the installation is completed, we have to debug for a period of time, and it is estimated that it will be put into use next month. "

Although it is only the beginning of June, the weather in Mingzhou has already started to heat up.

The most important thing is that the refrigeration equipment inside the factory building has not been installed yet, so Xu Xianbo, who is wearing a white helmet, is sweating profusely now.

Letting a few huge fans blowing there didn't have much effect.

"If it can be officially used next month, it will be too late.

Our molds have just been made, and it is time to adjust them with your equipment to see if the molds need to be modified. "

For the molds used in stamping, die-casting, and casting processes, it is often impossible to use them directly as soon as they are processed.

Even if your drawing data is very mature, it will not work.

There must be a debugging process between the mold and the equipment.

Then combine the parts produced by debugging to see if they meet the requirements of the drawings.

"Mr. Xu, I heard that Mr. Xiao may come to Mingzhou factory for inspection in a few days?"

Through the six months of contact, Yang Genbao has a more direct understanding of Nanshan Automobile.

Obviously, this is a company worthy of its own company's full support.

Although Yangzi Die Casting Factory also owns 20% of the shares of Nanshan Automobile, after all, the major shareholder is not someone else.

So Yang Genbao still wanted to establish a good relationship with Xiao Hui.

In the future, all kinds of die-casting equipment needed by Nanshan Automobile, as well as the die-casting equipment required by Nanshan Automobile's suppliers, can choose Yangzi Die-Casting Factory.

In this way, their position as the number one in the domestic die-casting equipment industry is completely secure.

Even if German and other foreign equipment manufacturers invest in domestic factories, it will not affect their status.

"Yes, Mr. Xiao should come. However, the specific itinerary has not been finalized yet. It should be determined in combination with the installation progress of your equipment and the situation in Mingzhou."

Yang Genbao is no outsider, Wang Fugui hesitated a little, and told him the situation.

"We would like to invite Mr. Xiao to dinner at that time, do you think it is convenient?"

"Mr. Xiao has always disliked socializing, unless he takes the initiative to mention it, otherwise I think it's better to forget it."

As an old man of Xiao's family, Wang Fugui is quite familiar with Xiao Hui's situation.

The boss is a workaholic and spends most of his time working in the company.

Although sometimes I am very particular about what I eat, but sometimes it doesn't matter.

I like to eat the food in five-star hotels, and I can also eat the big pot rice in the cafeteria.

"Some overseas luxury cars are now starting to use all-aluminum bodies, some of which are die-cast aluminum.

I would like to ask Mr. Xiao, does Nanshan Automobile have any ideas in this regard in the future? "

Seeing the simple meal, I probably won't be able to get an appointment with Xiao Hui.

So Yang Genbao immediately changed his method.

"I haven't heard of such considerations for the time being, but if you have relevant ideas, you can communicate with Mr. Xiao at that time."

"Then the Ministry of Labor and Kings will help you arrange the time? I can do it anytime."

"Okay, I'll make arrangements!"

……

After more than half a year, Xiao Hui came to the Mingzhou factory again.

Looking around, a large area of ​​factory buildings has sprung up, which is no longer the same as the original desolate situation.

"Mr. Xiao, after the installation of the 3000-ton multi-station stamping machine and the 4000-ton die-casting machine in your factory, you should be able to complete the installation of the overall equipment soon, right?"

Inside the factory, Xiao Hui and others accompanied a group of people in black trousers and white shirts to confirm the progress of the construction.

There are many people beside them carrying cameras, and the cameras are there to shoot and take pictures.

The leader of Mingzhou came to Nancheng to visit Xiao Hui some time ago, out of emotion and reason, Xiao Hui needs to be accompanied when they come to visit the Mingzhou factory this time.

After all, the factory will have to deal with people frequently in the future, so there is no need to be proud of being favored.

"According to our plan, the factory can start small-scale mass production in September, and new models will be put into production here."

The construction progress of the Mingzhou factory is no secret.

Not to mention that the media will report it from time to time. With just so many construction workers, it is impossible for you to completely keep them secret.

It seems that there is not much need for secrecy.

"I heard that the planned annual production capacity of your Nancheng factory is only 60?"

"Yes! At first, a factory with a production capacity of 30 was built, and then a production line was expanded to reach 60."

"If it's 60 units a year, is the production capacity of 5 units a month?"

"It's more or less like this, depending on the work schedule every month, it will be different."

"Well, that's true! But after your sales exceeded 4 units in April this year, your sales in May continued to remain at more than 8 units. The production capacity in Nancheng is under great pressure, right?"

After going around in a circle, Xiao Hui finally understood what he meant.

"There is some pressure. We will adjust the production capacity comprehensively based on the situation of the three factories later."

To adjust a model from one factory to another is not something that can be done in one sentence.

So Xiao Hui didn't directly promise anything.

Anyway, the meaning is in place.

The other party didn't mean to force him.

"During the construction of the factory, if you have any questions, you can call Xiao Huang directly and ask him to assist in the communication.

If Xiao Huang can't figure it out, you can contact me directly. "

Uncle Joe obviously still attaches great importance to this project of Nanshan Automobile.

They even directly arranged for secretary Xiao Huang to be the contact person.

"Everyone in Mingzhou is very supportive of our work, and everything is going smoothly. If necessary, I will definitely disturb Secretary Huang."

Xiao Hui replied with a smile.

Then the group continued to visit.

(End of this chapter)