my tech museum

Chapter 96 This is absolutely impossible 【Subscription】

"At present, we have solved the light source system, and the control software is about to be written. The core is still the objective lens composite material and photoresist and other components."

"However, many of these things have entered the experimental stage, and I believe they will be tested and used soon."

"I am sure to complete the assembly of this top-level lithography machine during the Spring Festival."

Xu Lei knew very well what Yang Senping was worried about. He was just afraid that he would speak too harshly at this time. If he failed to complete the research and development of the top-level lithography machine by then, it might cause more heated discussions and affect his positive image.

However, after basically debugging the light source system, he is beginning to get in touch with the preparation of photoresist at the chemical level. In addition, he also provided technical guidance for researchers in charge of other components, which made the research progress of various components by leaps and bounds.

There are still more than three months before the Spring Festival. It should not be a problem to complete the assembly of the lithography machine and produce chips.

And when Yang Senping still hesitated, Hao Yaoping said again: "I am willing to trust XCMG in this decision, he is a real genius."

If Hao Yaoping intended to train Xu Lei at the beginning, then after the two of them had a cordial and friendly discussion on lithography technology, he was completely convinced by Xu Lei's vast and exquisite technical knowledge.

I just feel that my research for so many years is simply doing useless work.

In the end, I am willing to be a student, and I go to Xu Lei for advice from time to time.

So with this relationship, he is naturally willing to believe in Xu Lei. Although it may be difficult for the outside world to imagine, Xu Lei may really be able to complete it on time.

I have to say that Hao Yaoping's words are quite convincing. Yang Senping, who was still hesitant, made a decision immediately after hearing these words.

Concentrate on preaching resolutely:
"Okay, I'll just trust you two once, but let's make it clear first that you must not let me lose the chain at a critical moment."

"Don't worry, Dean Yang."

Seeing that the matter had been decided, Xu Lei immediately stood up and patted Yang Senping on the shoulder with a smile and said, "I have to go back to the laboratory to continue to configure the appropriate photoresist, and I will leave it to you to be responsible for the specific implementation." gone."

After speaking, he turned and left directly.

"This kid." Looking at Xu Lei's back until it completely disappeared from sight, Yang Senping smiled and whispered.

Immediately, Hao Yaoping got up from the sofa, and also praised with emotion on his face: "It is a great blessing to have a genius like Xu Lei who strongly supports the development of domestic technology among the younger generations. Dean Yang, you must be optimistic about it." .”

But I don't know what Hao Yaoping's words made Yang Senping think of. When he was the only one left in the office, he was still in a state of thinking.

……

October 11th, Thursday.

When many people on the Internet were dissatisfied with stopping the research and development of lithography machines, the Chinese Academy of Sciences officially released an announcement through its official account.

It is clearly pointed out that the current domestic lithography machine is still in the research and development state, and it is planned to complete the first assembly around the Spring Festival and officially put it into use to produce high-end chips.

Since it is a decided matter, it must be very fast to act.

Yang Senping released this announcement almost on the same day, and screened the original project R&D team members.

It can be said to be carried out in a hurry.

And as this announcement was reposted by major mainstream media accounts, it immediately caused a sensation on the entire Internet after it quickly reached the top of the search list on all major websites and platforms on the entire Internet.

Originally, everyone requested to release the statement purely for peace of mind, but no one thought that there would be such a big explosive information in the announcement.

It was obvious that he wanted to fish, but the crocodile took the bait.

However, because the announcement pointed out that the domestic lithography machine will be assembled and produce chips around the Spring Festival, many people have questioned this, thinking that it is deliberately exaggerating the facts in order to deal with the turmoil on the Internet.

It eventually turned into a new controversy.

"I'm not mistaken. The lithography machine developed around the Spring Festival should not be something that has long lagged behind at 28 nanometers."

"I always feel that this wave has exaggerated the bull, and there is no way to get it back by then."

"It is absolutely impossible to develop a high-end lithography machine during the Spring Festival. It is completely a fart."

"I call it a good guy. We still have a long way to go in the technology research and development of high-end lithography machines, and we have made rapid progress in just a few months."

"It feels like it's better to stop the research on lithography machines."

"I'm more interested in this, and I want to see what excuses I will use to deal with it after the Spring Festival."

"Similarly, wait for the Spring Festival."

"You are really not afraid of being slapped in the face. I think that since you dare to say that, you must have confidence and confidence in it."

However, at the same time as this announcement was released, some video blogger accounts who forwarded this false news and caused bad influence were dealt with by the way, and they were punished by being banned from the entire network.

As a result, there were no industry professionals or well-known bloggers to discuss this time, and it did not cause much disturbance.

Anyway, after the Spring Festival, things will naturally come to a conclusion.

-

As for Brady.

As the specific executor of this matter, he naturally paid attention to the situation on the Internet.

After seeing the content of this announcement, he went to Mike's home overnight to report.

"Mr. Mike, just now the other party issued an announcement. They said that they are stepping up the development of high-end lithography machines at this stage, and they also promised to go online and put them into use in three months."

"Three months?"

"Brady, that's a good joke of yours."

In the living room of the manor, after listening to Brady's report, Mike couldn't suppress the smile in his heart and laughed out loud.

Obviously.

He didn't believe that assurance at all.

As a high-end lithography machine is a very complex and precise device, many companies cannot even solve one of the technologies, let alone manufacture a lithography machine that can be put into use.

What's more, the opponent's technology is already at a relatively backward level.

So there is only one explanation.

This is a deliberate fake news to eliminate the previous negative influence on the network.

"I didn't expect when even they would learn to deceive themselves and others. Using this method to eliminate the influence is really a wrong move!"

"Mr. Mike, this is an opportunity for us."

Noticing that Mike was in a good mood, Brady immediately echoed next to him: "After three months, we just need to take the initiative to put this matter on the international stage, then no matter what excuses they use to prevaricate, we will be punished." certain influence."

"You're right."

"Then this matter is still in your hands."

Mike thought about Brady's proposal for a while, and felt that this was a good means of operation, which was equivalent to an enhanced version of the previous dissemination of news.

Since he did a good job last time, he must still leave it to Brady this time.

After making good plans, the two looked at each other and smiled confidently, as if they had imagined that the opponent would slap themselves in the face when the time came.

But in the next second, Mike seemed to think of something suddenly, and said playfully, "Will they really come up with a lithography machine by then?"

"It's not impossible."

"After all, they can still manufacture micron-level lithography machines."

Facing Mike's question, Brady responded cooperatively, which heightened the atmosphere even more.

-

Perhaps it is because this matter is more important in the eyes of everyone, and the time given by the Chinese Academy of Sciences is too unbelievable, which makes related content can still be seen everywhere on the Internet a few days after the announcement.

The vast majority of people do not believe that the Chinese Academy of Sciences can manufacture high-end lithography machines in a short period of time.

But it is against this background that Warwick's mid-range mobile phone brand Xingyao officially released its new flagship phone through its official account.

As a well-known brand, the news immediately attracted the attention of many people.

But the most shocking thing is that this phone is actually equipped with a Tamron chip.

The key price is only half of the previous Tamron chip phone.

Only more than 3000 yuan.

You must know that due to the price, the mid-range market can be said to occupy a large share of the entire mobile phone market. Now you can use the most powerful Tamron chip for half the price. The number of people who want to buy this mobile phone will only be More.

In addition, the video bloggers in the major digital evaluation areas who cooperated with Xingyao quickly released the evaluation video after getting the prototype, which made the popularity show an explosive growth.

Of course, when everyone decided to wait for the Xingyao Tenglong chip mobile phone to go online and open for snap-up, they also discussed this situation that should not happen.

There's always something wrong inside.

Everyone knows that there is no way to produce Tamron chips for the time being, and the sales of Tamron chip phones in the market are all supported by initial orders.

Let's not talk about how many Tamron chips Warwick has in stock.

It may be able to meet the needs of the market if it was only used on high-end flagship phones before, but it is completely different if it is also installed on Xingyao mobile phones.

After all, the sales gap between the two mobile phones is not a star and a half.

And this abnormal situation also reminded everyone of the announcement issued by the Chinese Academy of Sciences.

A bold idea came to mind involuntarily.

Huawei can use Tamron chips without any scruples. The most convincing guess is that they don't have to worry about the supply of chips, but other fabs still have no way to manufacture them.

So there is only one explanation...

Could it be that the domestic high-end lithography machine has really made a major technological breakthrough and can complete the assembly test around the Spring Festival.

Although this point of view was still rejected by many people after it was put forward, the inability to explain the operation of the Xingyao mobile phone equipped with the Tamron chip made everyone look forward to the Spring Festival even more.

Xu Lei didn't take it seriously, whether it was Mike's small actions or the comments of people on the domestic Internet, because he was immersed in the process of photoresist preparation and other technical research.

The members who lead the project research team often work overtime to catch up with the progress, just to try to assemble this top-level lithography machine before the Spring Festival.

Take it as a gift for the New Year, and let everyone have a happy and exciting year.

……

Ps: Today, I will continue to update the [-]-word burst, please support the readers, grandpa, if the data is available, I will try to add it to [-]!

(End of this chapter)