Fel doesn't lie to you

Li Ke still went to visit the lathe and seeder that Wald wanted to make, but I have to say that the subjective kinetic energy of these dragon people is really admirable.

After getting Li Ke's drawings, they made a lot of things based on their own experience.

for example……

Standardized manufacturing.

This greatly shocked Li Ke.

It really shocked him.

"Master Li Ke, because the parts, forging methods, and repair methods required in your design drawings are different from the current engineering technology, your tools have relatively high requirements for the precision of mechanical parts, so we must first design A set of standard parts manufacturing production line, so the speed is a bit slow, otherwise you can see more than a dozen harvesters now, but please rest assured, as long as we smelt another furnace of steel, we can manufacture within ten days Fifty units will come out."

Wald stood on a machine tool that was being continuously guided and corrected by the dragon people in various ways, and carefully introduced it to Li Ke.

Although they didn't understand why Li Ke required such high precision in these simple machines, it didn't prevent them from implementing them, and they thought of many things that Li Ke didn't think of.

"It's just that we still lack iron ore. The existing steel production can only maintain the current scale, and these high-precision mechanical products you manufacture rely too much on engine oil and rubber rings. There are a lot of bearings, so now we can only use manual and magic methods to create two directional machine tools..."

Li Ke's design was a shock to Wald. Only those who are really engaged in architecture and machinery can understand how terrifying and grand it is.

Although Li Ke had restrained himself as much as possible when drawing the design drawings, and did not put any requirements for chips and circuit boards on it, but he ignored one point.

What he considers a 'barren' environment is already an incredible thing for the world of Azeroth.

When drawing the design drawings, he still subconsciously thought that he was in a country with nearly 35 manufacturing companies, 670 million factories, and countless small foundries, parts manufacturers, and even raw material manufacturers.

Including the requirements for screws and various types of parts, Wald was shocked.

Because he is knowledgeable, he knows exactly what kind of precision, strength, and special alloys are required for some parts on Li Ke's design drawings to work. This is the work of a dragon man who has lived in the dwarf world for hundreds of years. affim.

Moreover, the dragon people themselves are very sensitive to things like metal, and can even manipulate metal to a certain extent. They are the dragon army that is best at using tools among the entire dragon army.

There is no doubt that he is an expert!

The kind of expert who should be confessed!
As Wald continued to introduce the industrial system he saw based on Li Ke's design drawings, and then continuously modified various equipment, Li Ke was completely in a state of "shocking my mother".

Because he saw a very magical and technological thing.

Magic milling cutter.

That's right, the magic milling cutter.

The substrate is just an ordinary one, which can be seen to be a hand-forged milling cutter, but there is a layer of faint red light attached to it, and then Li Ke saw that the hand-forged milling cutter easily cut out one after another. One of the parts was then taken away by the Dragon Artisan on one side for quenching.

Li Ke even saw a pond filled with quenching oil.

But the quenching oil in this pool is not completely prepared for those milling cutters, but for the screws on one side.

Li Ke could see clearly that these dragonmen used shiny tools to easily pull out iron wires of different thicknesses, and then placed them on the sides of different machines, and then quickly cut and squeezed, even squeezed. When screwing nuts, do they use squeezing power or a hammer.

Afterwards, the gums and dental plates, that is, the devices that make the threads on the screws, are also shining red, and they can easily make a large number of threads on each semi-finished product, and then they are taken by the dragonmen on the side and thrown into the quenching furnace Quenching in the middle... Then Li Ke saw that two dragonmen had returned to their original shape, spitting a mouthful of dragon flames into them from time to time.

Afterwards, these screws will be thrown into the quenching oil pool to cool down. After cooling down, the water elements summoned one by one will be stuffed into their bodies for cleaning, and then thrown into the low-temperature quenching furnace aside for secondary quenching. Make sure the core of the screw is not so hard that it breaks during use.

A set of smooth and smooth processes, removing those magical elements, is completely a low-end version of a modern screw production workshop.

Especially those hand-forged milling cutters and dental plates, as well as those equipment, Li Ke was dumbfounded.

Li Ke even saw a group of dragonmen experimenting with a hydraulic press that he just drew a sketch of the design!And it's a magic version!
They're trying to do it with water elements!
It is to set the magic circle for summoning water elements and the magic circle for repatriation inside the machine, so as to control the strength of the hydraulic machine by controlling the strength of the summoning magic circle and the strength of the repatriation magic circle!And judging from their conversations, they're almost done with the sealing problem!
Li Ke was already speechless in shock. He watched them one by one, and Wald explained them one by one nervously. But looking at Li Ke's silent expression, he was still very disturbed.

Because he didn't know whether his self-assessment would make Li Ke angry, but he did his best to follow the standardization and precision that Li Ke said.

Although Li Ke just mentioned this matter.

But seeing Li Ke's shocked and unbelievable face, he still lowered his head and rubbed his hands uneasily.

"I must have upset Master Li Ke! That's right! That's it, how can I make my own claims? Master Li Ke's plan is absolutely perfect, I'm just doing too much! That's right! That's it!"

Thinking of Li Ke's precise drawings and extremely demanding parameters, Wald became more and more ashamed. He couldn't help but want to kneel down and beg Li Ke's forgiveness, and felt extremely ashamed of his own lack of ability. ——If he was more capable, he should not have disappointed his master.

However, when Li Ke saw the finished product, which was almost exactly the same as the screw, and one side of the nut that could fit perfectly into it, he finally couldn't help but speak.

Because in such a short time, hundreds of standard screws and nuts appeared in front of him.

"Walder?"

Wald immediately knelt down on the ground, prostrated himself on the ground, and responded respectfully to Li Ke.

"Master, I am here!"

"You used to...were you really spies before? And it was that kind of fringe, almost unexpected character?"

Wald became even more terrified, because what Li Ke said was the truth.

"Yes, yes, master! We are just the humblest existence of the Black Dragon Legion!"

Li Ke: "..."

Fuck!
The Black Dragon Army deserves to lose!