The Immortal Warrior: From Reverse Engineering to Forging Swords for the Country

Chapter 60 Witness the Miracle [Qiuzhui Reading Data]

Still the same sentence: This will be an epoch-making great achievement!

The acceleration of world chip development actually began in the 80s.

In the 70s, although China lagged behind Lizufang in the development of chip technology, it was not that far behind and could still keep up with the situation.

However, after the 80s, the situation changed.

Because Lizufang's attitude towards my country has changed, many commodities that were originally in short supply, such as Eagle Sauce, have opened their doors to China.

From that time on, the idea of ​​buying rather than making began to become popular.

Many important scientific researches have been suspended. In addition to large aircraft, it is chip technology.

This has caused us to waste more than 20 years in the most important technological field of chips.

Finally, someone choked me.

Now, this may be the biggest shortcoming in the history of China's technological development, and Zhang Zhipeng wants to make up for it himself!

This is definitely a gratifying thing!

Because of the pursuit of excellence, China's first nano-level lithography machine took more than ten days to produce.

At the beginning of the new year, this lithography machine was finally fully assembled.

Just because assembly is complete, this does not mean it has been successful.

It still needs to be tested to determine whether it has reached the design standards.

Zhang Zhipeng and Liu Chaoyuan personally controlled the machine and began experimental production.

Tian Hongtao and others were nearby.

Others were waiting quietly outside the dust-free workshop.

Making the mask, applying photoresist on the silicon wafer, and preheating the machine, every process needs to be rigorous and there can be no mistakes. …

What Zhang Zhipeng lithographed was the Godson he designed himself.

An 8-inch silicon wafer is used.

The two of them controlled the machine methodically, and the entire trial production process took about half an hour.

In fact, the exposure time of the silicon wafer by the photolithography machine is very fast. Even multiple exposures only take a few seconds.

Subsequently, Zhang Zhipeng inspected the exposed silicon wafer.

After checking it, he found that it had completely achieved the intended effect! The device functions quite perfectly.

The news spread outside the workshop, and the crowd waiting for the news burst into cheers.

Zhao Bingkun, director of the Science and Technology Commission, was also standing among the waiting crowd outside.

He and Lin Zijian were smoking and chatting quietly.

Zhao Bingkun has visited the 618 Factory three times in the past month, mainly to see the construction progress of the Loongson Factory.

Every time he came, he found that the preparatory work was carried out very quickly.

Originally, the military order signed by Zhang Zhipeng was for mass production within half a year.

However, the factory renovation was completed within a month.

The recruitment and training of personnel are also progressing quite smoothly.

The slowest is the design and production of equipment.

Of course, this is also the most difficult.

Although domestic lithography machines have been manufactured in China before, the technical routes are completely different.

Therefore, it has no reference value at all.

Again: laboratory production and factory mass production are really two different things.

Laboratory production can be done at any cost.

There are many factors that need to be considered in mass production in factories, and cost assessment is the most important.

Zhao Bingkun originally thought that it would take a long time to completely develop and produce chip equipment by ourselves. After all, this is also the most difficult part of chip production!

However, Zhang Zhipeng surprised him again!

By New Year's Eve, Zhang Zhipeng led the team to build the first internationally leading large-scale photolithography machine.

He was also invited to Factory 618 to witness the miracle.

Of course, Zhao Bingkun was shocked and hurried over.

Before the news of the successful trial production of the first domestic advanced process lithography machine came out, Zhao Bingkun was still saying to Lin Zijian: "Zijian, I always feel that this progress is too fast. This trial production, I think Don’t have high expectations either. Even if you fail, it doesn’t matter. Failure is success. Even if you fail a few times, it’s normal!” Zhao Bingkun’s meaning is actually very simple. He doesn’t want to put too much pressure on Zhang Zhipeng and other R&D personnel. .

Therefore, lowering expectations appropriately also allows frontline staff to be less anxious. This is what Zhao Bingkun is thinking.

Lin Zijian smiled and shook his head and said, "Director Zhao, you have to have some confidence in Comrade Zhang Zhipeng!"

"During the equipment production process, Comrade Zhipeng spent day and night in the workshop, striving for excellence in every component of this photolithography machine."

"The core components were all built by him personally."

"So, I have a different point of view from you. I think he will definitely succeed!"

Zhao Bingkun shook his head and said, "You are too optimistic."

"In scientific research work, I think we must allow failure! If it doesn't work once, then twice! As long as you persist, success will become inevitable!"

Lin Zijian chuckled and said, "If Comrade Zhipeng didn't have the confidence to succeed, he wouldn't invite you here to witness the miracle!"

"After dealing with Zhipeng for so many days, I think he is a very stable person. His trial production with such great fanfare shows that the probability of success is at least 90%!"

Zhao Bingkun said with a smile: "Isn't there still a 10% chance of failure?"

"Me! I just don't want to put too much pressure on them."

Lin Zijian smiled and said: "Then let's make a bet! The bet is just a panda, okay?"

Zhao Bingkun smiled and tapped Lin Zijian with his finger and said, "Okay! I hope you can win! If you win, I will give you two as a gift, no problem!"

Just as he was talking, a man ran out from the workshop, it was Tian Hongtao.

Tian Hongtao came to Zhao Bingkun and Lin Zijian with excitement on his face and said: "Director Zhao, Director Lin, it's done! The trial production of our first lithography machine was a great success!"

"The photolithography effect is very good, even exceeding Zhipeng's estimate!"

Naturally, this was heard by everyone standing outside the workshop, and everyone cheered immediately.

"Okay!"

"awesome!"

"Long live the motherland!"

Zhao Bingkun was naturally very excited: "So, can we start mass production of chips immediately?"

Tian Hongtao smiled and shook his head and said, "That's not the case!"

"The photolithography machine is solved, but there are other equipment!"

"However, the lithography machine is the most difficult part! If it succeeds, then there will be no other problems!"

Zhao Bingkun asked: "When is it expected to start full-scale mass production?"

Tian Hongtao said with a smile: "According to Zhipeng's plan, it may only take a month and a half at most, after all other equipment has been debugged, before production can start."

"Our first batch of production lines is two. In addition to the production lines, we also need to build auxiliary process equipment."

"In short, there is still a lot of work to be done next."

Zhao Bingkun smiled and said: "The progress is already very fast!"

"Congratulations! Xiao Zhang is quite reliable!"

"When he signed the military order, many of our comrades made assessments and believed that it was impossible for him to mass-produce CPUs within half a year!"

"But now, less than three months have passed! You are all already preparing for the final mass production!"

Next, Zhao Bingkun and Lin Zijian put on dust-free clothes and entered the workshop.

He saw Zhang Zhipeng and Liu Chaoyuan still busy next to a large machine.

When Zhang Zhipeng saw Zhao Bingkun coming in, he raised his hand and said hello: "Director Zhao, now I feel confident! I think there should be no problem in achieving mass production of chips within half a year."

Zhao Bingkun smiled and said: "I'm very happy to hear you say this! You have confidence in your heart, and I have confidence in my heart, haha!"

As he spoke, he curiously began to look at the lithography machine in front of him.

The appearance of the machine is quite sci-fi, and you can see blue light shining on the silicon wafer on the workbench.

Zhang Zhipeng finished his work for a while and then began to introduce the machine in front of Zhao Bingkun.

He said: "Director Zhao, let me tell you, if this machine were to let out wind, the whole world would probably explode!"

PS: There are less than 400 more votes for recommended tickets and 22 more votes for monthly tickets. Thank you to all the readers who support me. I hope you will continue to support me! Please read and get data!

(End of this chapter)