The Immortal Warrior: From Reverse Engineering to Forging Swords for the Country

Chapter 59 Start of Construction

Song Likun laughed and said, "Director Lin is really good at talking!"

"I've seen the news. You have achieved zero breakthroughs in dust removal and purification equipment. Congratulations!"

Lin Zijian smiled and said: "Thank you, Mr. Song, for the compliment! I can guarantee that this equipment is no worse than similar foreign products! On the contrary, in many aspects of performance, it is much better than similar foreign products!"

"When you called me, it must be more than just congratulations, hehe!"

Song Likun said: "You should know that we are building a new aircraft assembly workshop, which requires large-scale dust removal and purification equipment."

"We originally planned to buy imported products. But the price the Hansi people asked was too high and we couldn't accept it."

"Now that you have come up with a substitute, what else is there to say? I will go check it out. If there is no problem, then we will sign the purchase agreement immediately."

Lin Zijian was overjoyed and said quickly: "Thank you, Mr. Song, for your support! Then I will sweep the couch here and wait."

After making the call, Lin Zijian rubbed his hands excitedly and said to Zhang Zhipeng: "Comrade Zhipeng, big business is really coming to your door."

"They might buy five sets at a time!"

"This is a big business worth ten million!"

Zhang Zhipeng smiled and said: "Don't get excited, this is just an appetizer!"

"There must be a lot of orders waiting for you later!"

One day later, Song Likun came to Factory 618.

He personally observed domestic dust removal and purification equipment and experienced the performance of this domestic alternative equipment.

It is indeed as the news said, the performance is very excellent, much better than the imported ones.

The most important thing is that it is cheap!

It’s more than ten times cheaper than imported ones!

It also saves valuable foreign exchange coupons.

Song Likun immediately signed an agreement with Lin Zijian to purchase 5 sets of air dust removal and purification equipment, agreeing to deliver the goods in three months. Half of the payment would be paid within half a month of signing the agreement.

After the agreement was signed, the entire 618 Factory was in a state of excitement.

Workers and technical engineers were all running to tell each other, crying with joy.

Qiu Changzheng, an eighth-level worker, is now the workshop director again.

When the news reached the workshop, there was great joy in the workshop.

The workers were talking excitedly.

Qiu Changzheng was also very excited.

Because his family is under a lot of pressure, with many children and a lot of expenses. He will definitely not be able to support his family with just some living expenses.

Thank God, the factory finally survived.

"I said, why are you arguing?"

"Work hard for me!"

"Whoever screwed up the quality of my product, I'll kick his ass!"

"Loongson Company's workshop renovation task is very tight! We must work overtime to complete this batch of air dust removal and purification equipment to ensure quality and quantity!"

"If you do it well, you will make money! If you don't do it well, we will all have to drink from the northwest wind in the future!"

Qiu Changzheng severely reprimanded the excited and noisy workers.

Several naughty young workers stuck out their tongues and went to work.

At this time, Zhang Zhipeng, Tian Hongtao and others had already set up a laboratory in Factory 618.

The equipment inside was all moved from NPU.

In addition to the laboratory, there is also a large office where everyone can work together.

Zhao Min was also seconded to help.

Liu Chaoyuan also came to the team formed by Zhang Zhipeng.

Before Liu Chaoyuan came, he had heard Zhang Zhipeng introduce that they were working on production process drawings for all equipment in the entire chip industry chain. He thought to himself that this job might not be easy, and it would take at least a year or two to achieve results.

But when he came over and saw the various drawings that the team had perfected, he was shocked.

Oh my God! Are all the detailed process drawings ready for direct manufacturing?

Moreover, these drawings are very detailed, with various parameters, dimensions, and specific requirements all noted.

"Comrade Zhipeng, it seems that you have really completed the process design drawings of all large-scale equipment for chip mass production! This is also quite fast." Liu Chaoyuan said with emotion.

Zhang Zhipeng smiled and said: "There is still a lot of work to be done. We owed too much debt in the past, so now we have technologies that need to be broken through." "Liu Gong, you have rich experience, you need more Give us some guidance and help us avoid detours."

Liu Chaoyuan waved his hand and said: "Comrade Zhipeng is too humble. I am very ashamed. I want to learn more from you."

In the next few days, Zhang Zhipeng led the team and began to check for deficiencies.

For example, it is quite difficult to extract the high-purity quartz glass used to make single-crystal crucibles. Even if Zhang Zhipeng has systematic help, it will still take a lot of effort.

The single crystal crucible used by Zhang Zhipeng was borrowed from other scientific research institutes.

This thing also needs to be imported now, and the import price is quite expensive.

Today, if we want to achieve mass production of silicon wafers, we need to break through this technology.

Otherwise, importing from abroad will also cost a lot of foreign exchange coupons.

Not only does it cost a lot of foreign exchange, it’s also time-consuming and labor-intensive, and it also depends on the foreigners’ faces.

After some hard work, with the help of Liu Chaoyuan, the problem of the single crystal crucible was finally solved.

In addition to single crystal crucibles, there are also lenses required for photolithography machines, and the purity requirements are also quite high.

It also requires technological breakthroughs to achieve large-scale mass production.

Liu Chaoyuan is indeed smart and tenacious, and his approach to solving problems is quite innovative. This is probably breakthrough thinking.

In the blink of an eye, more than a month has passed.

The time has come to mid-December of 1990.

All problems were finally solved relatively well.

At the same time, Factory 618 has received orders for hundreds of dust removal and purification equipment, and the factory has begun to enter the normal operation stage.

The workers were compensated for their arrears of wages.

Because efficiency has improved, bonuses have increased, and employee benefits have also increased.

Factory 618, which was originally gloomy and gloomy, has regained its former vitality.

In more than a month, the factory renovation of Loongson Company has been completed.

Dust removal and purification equipment has also been installed.

With the help of Zhang Zhipeng's operation, Factory 618 added some more equipment. Of course, some of the equipment was designed and processed by Zhang Zhipeng himself.

These equipments are used to manufacture chips.

One day in mid-December, Zhang Zhipeng came to Lin Zijian. He said to Lin Zijian: "Comrade Zijian, our various chip production equipment is about to start production."

"Otherwise, progress will be delayed!"

Lin Zijian smiled and said, "We are all ready!"

"Ready to start production mode!"

Zhang Zhipeng said: "These equipment are quite sophisticated and the process requirements are very high. I hope our factory can mobilize all the most experienced workers."

Lin Zijian patted his chest and assured: "Comrade Zhipeng, don't worry! I know the importance of these equipments!"

"I'm going to put all my bones into it!"

"I will also keep an eye on it myself!"

"If anyone doesn't work hard, I will deduct his bonus!"

On the morning of December 12, Factory 16 gathered all its best workers into the workshop that produces equipment for Loongson Company.

Zhang Zhipeng himself also led key personnel to go deep into the production workshop and conducted detailed training for the workers.

Then, that afternoon, the production of photolithography machines began.

Zhang Zhipeng personally watched and worked with the workers at the site.

He found that these workers did a very good job and the accessories they produced were almost perfect.

Only then did he feel relieved.

Zhang Zhipeng chose to lead his team to process and produce the important device of the lithography machine in person.

Because of these core parts, on the one hand, the technology must be kept secret, and on the other hand, the precision requirements are too high.

He didn't feel comfortable leaving it to the workers.

If this first lithography machine in production can be successfully built, it will be China's first advanced lithography machine with world-leading technology!

Whenever Zhang Zhipeng thinks of this, he gets very excited.

(End of this chapter)