Smart Industrial Empire

Hearing that many domestic machine tool manufacturers have launched CNC machine tools, Yunfei knew that it must be the simplest CNC lathe.

Although the entry threshold for CNC machine tools is very high, it is only for companies outside the industry.For the production of simple CNC lathes, which are not very complicated CNC machine tools, as long as the technical strength is not very bad, there will be no problem.

The numerical control system includes Long CNC produced by Huadu CNC. As long as some low-precision ball screws, stepping motors and high-precision rotary tool holders are imported from Japan or Taiwan, after a little modification of ordinary machine tools, it becomes a numerical control system. machine tool!

Following the discussion of the domestic surname society some time ago, the domestic economy has been in a downturn for a while, but after the old man's southern tour, the economic development of the entire country is like a tiger descending from the mountain, and the flood that opened the gate was extremely fast.Especially in the manufacturing industry, the whole world is flooded with Chinese manufacturing.

The development of the manufacturing industry has led to the rapid development of machine tool equipment manufacturing. However, because the country is worried about the overheating of the economy and has been adopting a deflationary policy, some machine tool companies that are not doing very well cannot bring money at all, and those benefits are not very good. Many of the state-owned enterprises are already waiting to go bankrupt, and the state will certainly not repay the large amount of loans to those factories at this time. a great burden.

The reason why Yunfei was able to get the loan was not because the old man was very optimistic about him, but because the value of 40.00% of Huashu shares in his hands, according to the current development trend of Huadu NC, was far more than 5000 million.

After the bank knew the value of Huadu NC, it wanted Yunfei to lend more money. Although the national policy of this era is to tighten money, they are still willing to lend more money to those high-quality collateral.You know, the loan interest in this era.But ten percent!If Yunfei borrowed more than 1000 million yuan, the annual interest would be more than one hundred thousand yuan.This can be related to the bonus of everyone in the bank.

The 3000 million from the loan was invested in the construction of factories and residential areas. The 1000 million that Yunfei brought back from Huadu became the working capital for the relocation and start-up of Jiuyi Heavy Industry. In other words, when there is no return of funds, 1000 million will not be able to support the company for several months under normal production conditions.

I originally planned to wait until the CNC machine tool was produced.Then start to withdraw funds with all our strength, how can I expect that when Yunfei's CNC machine tool samples have just been produced, and the products have not yet been fully finalized, the Chinese machine tool market is full of CNC machine tools from old machine tool manufacturers. The precision is not very good, the quality is not very good, but even the most garbage CNC machine tool in Yunfei's eyes will make Jiuyi Heavy Industry, which is still in its infancy, face a disaster of blood!

unless.It is the most common and worst price war in China's machine tool market between Yunfei and those established machine tool manufacturers.

This is simply unbearable for Yunfei.

Although the market for ordinary machine tools is also very large, there are too many domestic manufacturers in this era.There is not much profit at all, especially Jiuyi Heavy Industry has several more processes than other machine tool manufacturers for the sake of quality. The number of aging treatments alone is at least twice more than other machine tool manufacturers.

Even if the internal stress of the machine tool bed has not disappeared cleanly.There will be no impact in a short period of time.Many machine tool manufacturers in this era, especially manufacturing-type private enterprises, their equipment.In a few years, it will be updated.Because it was used too harshly.

In Yunfei's world, many people Yunfei knows are engaged in mechanical processing. The machine tools they buy for metal cutting, especially the ordinary lathes and milling machines used for rough drawing, usually take two or three years. The time machine tool was scrapped because the accuracy dropped to an unbearable level for the boss.It is simply impossible to compare with the service life of machine tools produced in China in the 70s and [-]s, which can last for decades.

Although the quality of the later machine tool production could not be compared with that produced in the 70s and [-]s, the main reason was that the private owners used the machine tools too hard.The purpose of buying a machine tool is to make money. If you don’t use it ruthlessly, in an era when processing prices are low, labor costs, and factory rents are extremely high, private owners can’t make money at all, and many times they can’t even eat porridge.

Therefore, Yunfei was unwilling to be like those large machine tool manufacturers in his own world. In the end, he was forced to have no choice but to produce those heavy-duty processing equipment with a small market but extremely high cost.

Heavy-duty processing equipment will definitely be the main business of Jiuyi Heavy Industry in the future, but ordinary small machine tools are the mainstream in China. At least in the next few decades, China's CNC machine tool technology has not made a major breakthrough, especially ordinary small and medium-sized CNC machine tool technology. At the time of breakthrough, ordinary metal cutting machine tools will be the mainstream of China's machinery manufacturing industry.

Yun Fei smoked heavily while circling in the office.

"Brother Yunfei, what's the matter with you?" Ni Lishuang's heart tightened when she saw Yunfei smoking a cigarette and anxiously walking around in the office as soon as she walked to the office door.

"Shuang'er, our factory might really be going bankrupt..." The appearance of Ni Lishuang made Yun Fei want to talk about it.

"What's the matter? Are you talking about it? Tell me, let's find a solution together..." Ni Lishuang has never seen her elder brother Yunfei like this since she was a child, and her heart is like a knife. After being discharged from the hospital, Yunfei basically I have never been alone with Ni Lishuang in the past.

Yun Fei often worked overtime in her office until late at night. When she was very young, something happened at home. After her parents died, Ni Lishuang didn't dare to stay alone in the dark room.She was also worried about disturbing Yunfei by staying with him in Yunfei's office, so she had no choice but to live in her uncle Jiang Jianxing's house.

Jiang Jianxing was assigned by Yunfei to the very important position of manager of the purchasing department.If a factory wants to save costs, the most important thing is to start with procurement.Especially for machine tool manufacturers like Yunfei, the purchase of raw materials such as steel is often hundreds of thousands of tons, and there are more electrical accessories and other things. If the purchase takes rebates from the seller, not only The purchase price will be much higher than the market price, and even many things will have quality problems.

Yun Fei told Ni Lishuang about the crisis that Jiuyi Heavy Industry was facing, but Ni Lishuang could only follow along in a hurry, unable to put forward any constructive suggestions at all.

In the end, Ni Lishuang suggested that Yun Fei call Mao Yingjie and others. There are many people and strength, and they might have some ideas, but Yun Fei vetoed it.

Yu Cheng and Feng Qingping went to the Pearl River Delta to run the ordinary lathe market. It is estimated that the progress was not very smooth, and they only called occasionally to report that they were safe.Yunfei knew quite a few bosses of machinery processing factories in Huadu, and there were still many people who wanted to recruit Yunfei to work as master masters or deputy factory directors in their factories.After Yunfei left, he visited many bosses of machining factories. At the beginning, those people all swore that if Yunfei's factory produced metal cutting machine tools in the future, as long as their factory had a demand, they would definitely do so as soon as possible. Consider Yunfei's products.

But now the situation has changed. The entire Huadu has flapped its wings because of Yunfei, an unexpected butterfly. Huadu’s machining industry has been developing towards CNC in the early 90s. CNC machine tools are the ones in the Pearl River Delta. The bosses of machinery processing factories and production enterprises prefer CNC machine tools.

Although the cost of CNC machine tools is much higher than that of ordinary machine tools, CNC machine tools do not have as high requirements for operators as ordinary machine tools.Dozens of CNC machine tools only need one or two process technicians, two or three programming technicians, ordinary workers, as long as they are not fools, they can train for a week casually, and they can make complex parts that can only be made by skilled workers above senior workers in the past.

Not only the production efficiency is high, the quality is good, and the appearance is more beautiful.

The reason why Yunfei wanted to improve his CNC machine tools to perfection at first was because he had a large number of potential customers in the Pearl River Delta.

The bosses of those private factories in the Pearl River Delta are very eager for CNC machine tools, but they have no access, or because they cannot afford the high price, they can only look at other people's imported CNC machine tools and sigh.

Domestic CNC machine tools, let alone whether the accuracy can be compared with imported ones, the price alone is much cheaper than imported machine tools.

It is not that domestic CNC machine tools dare not charge too high a price because they know their quality is not good, but imported CNC machine tools have a lot of miscellaneous import fees.Even if the price of domestic CNC machine tools is sold at the FOB price of similar foreign CNC machine tools, in China, which has not joined the WTO, the price of domestic machine tools will be tens of thousands, or even hundreds of thousands, lower than imported machine tools.Of course, this money is not tariffs.

In this era of China, high-tech products such as CNC machine tools will not be subject to tariffs.

Of course, if someone can help the country get the urgently needed five-axis, even if it costs millions or even tens of millions of imports, the country will willingly pay the cost.Think about the cause of the Toshiba incident back then. In order to get a five-axis CNC machine tool, the old Soviet Union teamed up with Japan to make a blind eye. It took several years and tens of millions of dollars in funds!

The market in the Pearl River Delta is huge, but if the CNC machine tools produced by several or even dozens of machine tool companies across the country pour into the Pearl River Delta, the market will become too small.For the market, for survival, for profit, the price war will definitely become extremely tragic in the Pearl River Delta.

Is this a disaster or something for Yunfei who has been counting on the rise of the Pearl River Delta market?

Yunfei would not think that what Li Lu told him was nonsense. (To be continued..)