Smart Industrial Empire

Yunfei didn't expect things to turn out like this. No matter what, he couldn't figure out where those machine tool manufacturers got such things as servo motors, ball screws, and high-precision positioning rotary tool holders in a short period of time.

For a long time, because Japan is close to China, especially the Northeast of China, the Northeast No. [-] Machine Tool Factory has been purchasing CNC systems and various core and key accessories of CNC machine tools from Japan in small batches.The Northeast No. [-] Machine Tool Factory wants to purchase in large quantities, but the little devil is more cunning than Hou. How can he export the CNC system and various key accessories of CNC machine tools to China in large quantities?

In that case, the export of the devil's complete machine will be greatly affected.

With the emergence of the Long CNC system and the rise of Huadu CNC, the devil can no longer be indifferent.Several developed countries that have been monopolizing control of CNC machine tools and CNC systems in the Chinese market, after spending a large number of those CNC systems that are no worse than their mid-range systems, Dragon CNC, which has an extremely disgusting name, began to appear in large numbers. Opened the control of low-end CNC machine tools and various key accessories.

Among them, the companies that play the most important roles here are the major CNC system manufacturers of Devil, Fanuc, and Mitsubishi.It is an accident that a locally developed CNC system appeared in the Chinese market. You must know that the Chinese have been seeking for their CNC system technology. systems, as well as milling machine systems.

With the system, China's CNC machine tool research will no longer be restricted as before.

The Taiwanese sold a large amount of the most important chip and other hardware systems of the numerical control system to Huadu CNC. They did not consider the feelings of the master, so the Japanese were very upset, but there was nothing they could do about it. In this era of globalized economy, A company that produces the hardware necessary for various CNC systems.Not just in Japan.Over the years, Taiwanese have gotten very close to their master's master.

The Taiwanese have already acquired the production technology of those low-level hardware a few years ago.Besides, if the devil wants to punish his younger brother, he has to ask his master whether he agrees or not.

Therefore, the devils began to dump a large number of low-end CNC machine tool accessories on the Chinese market.In order to cope with the unfavorable changes brought by Huashu to the Chinese market, Devil's mid-range CNC system has gradually begun to loosen restrictions on China.Especially after knowing that the young man who made Huadu NC rise in an instant went to Rongcheng to set up a machinery processing factory, which is a heavy-duty processing enterprise that produces machine tools. Several Japanese machine tool manufacturers who have always looked down on China's machine tool manufacturing industry were angry. .

In order to punish the young man who disturbed China's CNC machine tool market, and at the same time to prevent China's independent research and development, all kinds of devil's accessories appeared in China.Taiwanese accessories began to be available in large quantities.

The proud Germans don't care about the emergence of a Chinese CNC system manufacturer at all.Their systems are the best in the world, and their CNC machines are also the best in the world.The Chinese who cannot even produce key parts of CNC machine tools do not believe that the Chinese can produce high-end CNC machine tools in a short period of time.

If it can be produced, the Chinese will not buy four-axis and five-axis CNC machine tools all over the world.

Through Ren Zhiguo, Yunfei finally understood why many CNC machine tool manufacturers suddenly emerged in China.These CNC machine tools are the most low-end EDM and wire cutting.CNC lathe.

After knowing what was going on, Yun Fei was extremely annoyed.

You can't take your own world for granted.

You know, it is already [-], and although the East Germany and the Federal Republic of Germany flirt with each other.However, the merger has not yet occurred, and the Berlin Wall has not yet been torn down; Balgochev of the Soviet Union is still staying in the Kremlin that does not belong to him in his own world; Yeltsin is still working hard for his own rights.The third Iran-Iraq war, which should have ended long ago, is still going on in full swing.

Yun Fei, who has self-knowledge, knows what the world is like now.It was not at all that the unexpected butterfly flapped its wings and changed.At least, he has come into contact with foreigners so far.Except for Smith and others who pretended to be the investigation team of Deere Company, there was really no one else.It is even less likely to be related to the situation in the Middle East.

Balgochev did not agree to referendums in several Mediterranean countries like he did in Yunfei's world, and has been severely cracking down on those forces that split the country.Although the entire Soviet Union is now in chaos, thanks to the efforts of the powerful Gorbachev, the hammer and sickle flag over the Kremlin is still flying high.

The reason why the Iran-Iraq war is still going on is because Iraq has the support of the Soviet Union. The United States, which originally supported them, turned to support Iran.The Iran-Iraq War, which started in 1980, should have ended in [-], but it has been going on for almost five years now, and there is still no end to it.

Although the people in both countries have already made their livelihoods difficult, both countries have rejected the mediation of the international community.Although the two countries have not declared the end of the war, they just shoot a few shots at the other side's border every once in a while. As long as the two sides of the border are still shooting at each other, it is still a war, isn't it?

The Iran-Iraq war is not over, each has state support, and Saddam Hussein in Iraq did not invade brother countries in [-] because he was jealous of Kuwait's wealth, as in Yunfei's world.

This world, to Yun Fei, is a strange world.

Although it is different from Yunfei's own world in many ways in terms of major events, the technology of this world is still similar to Yunfei's world.

During this period of time, Yun Fei has been learning about the world through Zhao Xingbang and Ren Zhiguo.

He only now realizes that he has been in this world for almost two years, and he has never understood this world.

He missed his own world, Du Niang, and everything.

Yunfei doesn't have the habit of reading newspapers. In his world, newspapers are just a way for those old people who don't know how to surf the Internet to kill time.With Du Niang in hand, I have the world.No matter what kind of thing, there is Du Niang to tell.

After coming to this world, although he knew that this world was not his own when he learned that the Soviet Union had not disintegrated, Yun Fei still planned to rely on the historical development of his own world to view the development of this world.In addition, he only reads newspapers occasionally, and doesn't even watch TV. Since he came to this world, Yun Fei has never been idle except for a day or two when he just returned to the depths of Daba Mountain.

In the midst of being busy, time always flies so fast, before I know it, I have been in this world for two years!While rubbing his head, Yun Fei sighed.

"Shuang'er, inform the leaders of all departments to hold a meeting in the conference room at 08:30 tomorrow morning." After completely digesting these things, Yun Fei sighed. He had never experienced any big battles in his previous life. When he was acquired, he was a small technician, except for a small amount of inside information, he didn't know how to operate it.

The products in the factory have just been produced and are facing such a bad situation before they go on the market. Yunfei knows that the only way to get Jiuyi Heavy Industry out of the predicament and the fate of bankruptcy as soon as the product goes on the market is to quickly develop a three-axis machine. CNC milling machines and CNC machining centers.

If Yunfei had not placed Jiuyi Heavy Industry in the Economic and Technological Development Zone of Rongcheng, he would not have faced such a predicament at all.

The general machine tool market in the southwest region is firmly controlled by the Diannan Machine Tool Factory. Rongcheng is far from having as many machining companies as later generations. The ordinary lathes produced by Jiuyi Heavy Industry are not well-known in this era. There simply cannot be a big market.

Everyone is on the same starting point for CNC machine tools, but Jiuyi Heavy Industry, which is not well-known, even if it produces better equipment than those established machine tool factories, but it is not well-known and has no old customers, so there is no big market at all.In this era, the price of the cheapest ordinary CNC lathe is as low as 8 yuan!

In the era when the per capita salary has not yet exceeded 8 yuan, [-] yuan is still a huge sum of money.

In Yunfei's world, many small processing workshops with only one or two machine tools exist because the price of machine tools in that era has not changed much from that of this era, but the per capita wages at that time were already ten times higher than that of this era. times more.Anybody can come up with the funds to buy one or two machine tools. If it is not possible, they can also find a bank loan!

"Everyone, please come to the meeting today. I want to tell you that Jiuyi Heavy Industry is now in a critical period of life and death!" After the heads of all the workshops and departments in the company arrived, Yun Fei went straight to the point Talk about the difficulties faced by Jiuyi Heavy Industry.

"Boss, don't scare us, it's only been a few days of good life?"

"Didn't we just develop CNC lathes? The national CNC machine tool market has always been in short supply. In addition, our CNC lathes are not only of good quality, but also cheaper than those imported from abroad. The import fee is tens of thousands of dollars... ..."

Hearing Yun Fei's words, these middle and high-level managers who had just received high salaries for a few months suddenly became anxious.

"Be quiet..." Yun Fei patted the conference table heavily, calming down the heads of various departments who were whispering or questioning him loudly.

"Perhaps everyone doesn't know that there are more than ten domestic manufacturers of CNC lathes. Apart from the No. [-] Machine Tool Factory in Northeast China that has been producing, even our neighbor, Diannan Machine Tool Factory, their CNC lathes are half It appeared on the market a month ago. Today, I want to ask, do people in the marketing department only know how to eat? Why don’t we know such important information? No one has ever notified me! What’s the use of me supporting you ?” For company management, Yunfei is really not good at it. (to be continued..)