Smart Industrial Empire

For the lathe price of more than 11 to more than 18, few customers would think that this kind of CNC lathe produced by Jiuyi Heavy Industry is not worth the price.

Grades are not the same, of course, the price can not be the same.

You must know that the price of CNC lathes with the same gear imported from abroad is basically between 16 and 24!There will be no choice.

Not to mention anything else, just take the tool position of the rotary tool post as an example. Most of the CNC machine tools imported from abroad are ordinary turret tool posts that can only hold four knives. On relatively high parts, the CNC lathe with an ordinary tool holder that can only hold four knives at a time has no way to clamp the workpiece at one time, or install enough tools to process the part at one time.

In this way, only sub-processes can be carried out.

Anyone who works in machinery knows that the more complex the product is designed, the higher the precision requirement.If the processed products can meet the design requirements, it is required to ensure the processing accuracy in the production process.

The production of large batches of parts is okay, at worst, it is enough to make a few sets of tooling with relatively high precision, but it is not good for small batches.The higher the precision of the product, the higher the precision requirements for the tooling.The higher the precision of tooling, the more difficult it is to design, and the harder it is to design, the more difficult it is to process, which ultimately reflects the high cost of tooling.

Especially in the emerging mold industry in the entire Pearl River Delta, their requirements for CNC machine tools are even more abnormal.

Simple cold stamping molds are okay, but for those plastic molds with high precision and complex curved surfaces and precision casting molds, there is no way to make precision molds that meet the design requirements without high-precision processing equipment.

Although the accuracy of imported CNC machine tools can be guaranteed, the price is a bit too unacceptable, especially when each machine has to be paid a considerable amount of import fees by those agents.Now the CNC lathe produced by Jiuyi Heavy Industry.Let them see hope.

Mold production belongs to the production of single piece and small batch.The machining accuracy of many parts inside is very high, especially for some key rotary mold parts, a CNC lathe with multi-tool turret tool post is required to ensure the various fit tolerances and shape and position tolerances of the parts.

Jiuyi Heavy Industry's hydraulic system-controlled chucks and multi-tool holders, which are only used in foreign medium and high-end CNC machine tools, not only do not need to pay agency fees to agents, but also are cheaper than foreign CNC machine tools.Although these CNC machine tools may not be more reliable than imported machine tools, Jiuyi Heavy Industry has an office in Huadu, and several professionally trained maintenance personnel are on standby!

"Director Jiang, when will our ten beds from Xinkaixing arrive? I have been waiting for more than two months, and both bosses told me. Before your equipment is ready for the market, it has been launched since the earliest Fifty CNC lathes going to Huadu specially mobilized ten of them for Xinkaixing, you will not stop them?" Zhou Bin, the factory director of Xinkaixing, is now facing Jiuyi Heavy Industry in Huadu with a cold expression on his face. Jiang Jianxing, the person in charge of the sales point, asked.

"Old Zhou, this train doesn't belong to our family. We don't want it to be transported as soon as possible, so we can transport it. Wait a minute..." Jiang Jianxing said guiltily to this and also occupied a lot of numbers. The director of the machinery processing factory that owns the shares of the company said with a smile.

Originally, Jiang Jianxing was appointed by Yunfei as the purchasing director, but at the beginning, Jiang Jianxing visited various factories that produce mechanical parts along the coast, and at the same time promoted Jiuyi Heavy Industry's machine tools.So in the end, he simply left it as a mistake to be the purchasing director, and instead applied to Yunfei for Huadu, which made him suffer a lot and suffer a lot.The luxurious city became the person in charge of a small point of sale.

Of course, he also has to be responsible for the purchase of some electrical products of Jiuyi Heavy Industry here.

A lot of electrical equipment can be used on a CNC lathe, if only relying on the more than 100 people in the current electrical production workshop of Jiuyi Heavy Industry.It is simply impossible to produce hundreds of types of electrical equipment. Many things cannot be mass-produced with technology.

"Don't tell me that the train is late! Don't think I don't know that you sold the CNC lathes that should have been given to us in Xinkaixing! Either you give me ten sets today. Or, I'll call Boss Yunfei , Let him come and comment on this reason for us! The things produced by ourselves, instead of being used by ourselves, are sold to our competitors instead!" Zhou Bin became angry when he heard Jiang Jianxing's words.

Xinkaixing has now put its energy on the manufacture of shoe-making equipment from the processing of a single component product.

In Huadu, the wages of the entire machining industry have dropped by several percent. Under Yunfei's telephone guidance, Xin Kaixing shifted all his focus to the CNC machining business.Now the entire Xinkaixing precision machining workshop has more than 40 CNC lathes, more than 20 CNC milling machines and machining centers, plus EDM, wire cutting and other equipment, the number of CNC machine tools has reached hundreds.

In the entire Pearl River Delta, Xinkaixing has become the machining factory with the largest CNC machining capacity.

From the very beginning, when Wang Qingfeng called and said that he had ordered ten CNC lathes from Jiuyi Heavy Industry in Yunfei, which were more advanced than foreign imports and could hold ten knives at a time, Zhou Bin became excited.

Now Xinkaixing is not what it was a year ago. At that time, basically any kind of business would continue. Now Xinkaixing’s ordinary machining workshop has been reduced to a workshop dedicated to rough machining, and even a lot of production precision The machining business that is not high, and the production volume is not large, was signaled by Yunfei to transfer those businesses to Yu Deshui, who already has more than 20 machine tools of various types.

Zhou Bin has been the factory director of Xinkaixing for more than a year, but few people think that the reason why Xinkaixing has developed to the present point is the result of his hard work.Many people believe that the development of Xinkaixing to the present level is the foundation laid by Yunfei, a young and old factory director.

Therefore, when he discovered the prospect of the mold industry, Zhou Bin called Wang Qingfeng several times and asked to set up a special mold workshop in Xinkaixing, and personally sent a list of CNC equipment for purchase to Rongcheng.

When he first saw the purchase list, Wang Qingfeng, who had always regarded himself as a nouveau riche, was horrified by the total price of the equipment listed on it!

The price of three four-axis four-linkage machining centers is 500 million; the five machining centers of Taichung Precision Machinery are 500 million, and the ten German mid-range CNC lathes are 320 million...

Adding up all kinds of equipment, the total price of the purchase list exceeds 500 million!

Finally, after Wang Qingfeng told Yun Fei about Zhou Bin's thoughts, he did not expect Yun Fei to support him strongly.However, three four-axis machining centers were changed to one, five machining centers became three machining centers, three CNC milling machines, and ten CNC lathes were directly crossed out by Yunfei.

After Jiuyi Heavy Industry's 6132 CNC lathe was finalized, the first batch of fifty machines produced were all sent to Huadu, and ten of them were assigned to Xinkaixing.

"Uh, Lao Zhou, it's not good to disturb the boss because of such a trivial matter. You know, my boss is also your boss. Our own family earns our own family's money. That's not interesting, is it? Anyway, sooner or later Yes, you wait first..." Jiang Jianxing didn't want such a trivial matter to make Zhou Bin fuss in front of Yun Fei.

If that's the case, I will definitely be transferred back to Rongcheng by Xiaoyun. If that's the case, then...

"I don't care what you say, this time another [-] units were sent here, I don't care who you intercepted from, anyway, I won't leave without seeing the bed..." Zhou Bin This time, he would never agree with Jiang Jianxing to withhold Xinkaixing's equipment to other manufacturers.

Now, not only are we making foreign trade products for old customers, but a guy in the business department has also helped to get a lot of products that large machinery companies in Germany and the United States are unwilling to make by themselves because of cost issues through a relative abroad.

If possible, Zhou Bin even hopes to add ten more CNC lathes.

Now there are more and more business accumulations in the whole factory. Many high-precision products are made with ordinary CNC machine tools in those workshops, and the efficiency is too low.

"Five sets, up to five sets..." After some haggling, Jiang Jianxing could only give a slap in the face helplessly.

Zhou Bin dragged five CNC machine tools back to Xinkaixing dissatisfied.

"Manager Jiang, you are so unkind? We agreed at the beginning, why is there only one of the three CNC lathes that should have been handed over to me now?" A middle-aged man with a big belly pointed Jiang Jianxing shouted dissatisfied.

"Oh, boss Zhu, you also know that our Jiuyi Heavy Industry is just a small factory with more than a thousand people, and the production capacity is already insufficient. The three CNC lathes with the highest CNC configuration you want have a long production cycle. All aspects require the most experienced ninth-level fitters. Our factory only has more than a dozen nine-level fitters. Up to now, we can only assemble more than 20 CNC lathes with the highest precision level in a month... Boss Zhu, I I just arrived here with a few 6140 simple CNC lathes, with 1-meter guide rails, and the price is the same as a standard 6132 machine tool, do you want it?” For this, Jiuyi Heavy Industry started to come to the door to ask for CNC lathes when the first batch of machine tools arrived. Jiang Jianxing, the boss of Jianyu Machinery Company who owns the lathe, really can't explain.

This guy is also doing CNC foreign trade processing. He has a daughter who is studying at the Krupp Institute of Technology in Germany, and he has done a lot of good work for him.Therefore, this product will never satisfy the demand for CNC lathes, especially this product often helps people who are being accused to make CNC machine tools. (To be continued..)

ps: Tomorrow will be Sunday every day, but unfortunately Hulu has to work overtime.If you get off work early, try to ensure three or four shifts tomorrow. I hope everyone will vote for recommendations to comfort the gourds who are exploited by capitalists...