Smart Industrial Empire

"Sister, this is our foundry workshop. All the various castings and large castings on the machine bed are all cast in this workshop.

Including smelting, casting, wood moulding, heat treatment, forging, etc...." At this moment, it was almost six o'clock, and Jiuyi Heavy Industry, which was working in three shifts,

The second production shift is about to go to work, and the shift is being handed over at the moment.

Li Lu has never been to a production workshop, especially a machine tool workshop.

As soon as he entered the foundry workshop of Jiuyi Heavy Industry, he was frowned by the heat blowing in his face.

"It's so hot in your workshop now, how can the health of these workers be guaranteed when it's the hottest?" The environment in the foundry workshop is very bad, the unbearable high temperature and strong dust make Li Lu The proud girl who had never entered the production workshop could not observe in detail, she just stood at the gate and walked a few steps before retreating.

In this era, China's labor law has been formulated, and workers don't care too much, and neither do manufacturers.The only thing is that these are special

Workers in workshops with special types of work can retire five years earlier than other types of work in other workshops.

Yunfei's Jiuyi Heavy Industry has come to the forefront of the whole world in this respect.Of course, Yunfei would never make the joke of installing an air conditioner in a casting workshop where the indoor temperature is tens of degrees all the year round. The only solution that can be solved is to reduce the working hours of the workers, provide some summer medicine and drinks and more...

"Due to the lack of personnel in the entire casting workshop, the training of the newly recruited personnel has not yet been completed. However, after the training of personnel is completed, the casting workshop will carry out production in four shifts for six hours. There will be unlimited supply of iced sour plum soup in each shift every day. As well as mung bean soup, the commonly used medicine Banlangen, etc., will also be regularly distributed to workers..." Although I am very dissatisfied with Li Lu who unexpectedly appeared and lived in my home, I have these doubts about Li Lu.Ni Lishuang still explained in detail to Li Lu who didn't understand anything.

In her opinion, Li Lu asked to visit Jiuyi Heavy Industry's production workshop as soon as she came, not so much to understand the production of machine tools, but rather to find an excuse to get along with his brother Yunfei more.

There are several workshops in the smelting workshop. The wooden mold workshop and sand mold manufacturing section are all in other workshops. After the sand molds used for casting machine bed and other large castings are completed, they will be sent to the foundry workshop. Casting area.

After the casting is completed, those blanks will be sent to the heat treatment workshop for the first annealing. The environment of the heat treatment workshop is not much better than that of the foundry workshop.

Li Lu also showed a lack of interest in the forging workshop where the noise was particularly loud.

Yun Fei just introduced the situation to Ni Lishuang at the gate, and then led her to the machining workshop.

"Xiaoyun. What are there so many castings piled up outside for?" In the huge open space outside the machining workshop, there are many castings of the machine tool bed densely packed, like a huge steel tomb.

"The machine tools placed outside here are gradually undergoing natural aging. When people, in the hot weather like now, special people will spray water on these castings every day to interfere with natural aging. These castings are for In the future, our factory will prepare for the production of precision-level CNC machine tools..." Speaking of the densely packed machine tool castings outside, Yun Fei burst into pride.

The artificial aging efficiency is very high.But there is no way to completely eliminate the stress inside the casting.He wanted to make precision-level CNC machine tools, so he arranged a plan for the production management department to produce these machine beds at the very beginning.In this era, most machine tool manufacturers have begun to gradually eliminate the stress relief method of artificial aging, because natural aging is too labor-intensive.There is also a backlog of generation costs.

Li Lu doesn't know what aging is. Asking if she doesn't understand is her greatest strength. She immediately asked: "What is natural aging? What's the use?" In Li Lu's understanding.The machine tool can be directly cut after being cast, but what she saw in front of her subverted her understanding.

"The so-called natural aging is a way to use the natural forces of wind, sun and sun to relieve the stress generated inside the casting due to the drastic drop in temperature during the casting process..." Before Yun Fei could speak.Ni Lishuang grabbed Yun Fei's words and explained these things to Li Lu, a novice in her eyes who didn't understand anything.

When talking about these things, Ni Lishuang's face is full of pride. Li Lu's angelic face, the inferiority that the devil's childbirth brought to her gradually disappeared. Although she is only a technical school student majoring in accounting, she In terms of machinery, she still put in a lot of hard work and self-study, especially when she knew that her elder brother Yunfei had established a machine tool factory, she was still in the hospital, and she had to read a lot of professional knowledge books every day.Especially after recovering from illness, I will take time out every day to go to each production workshop to understand the functions of various production processes and what effects they can achieve.

Ni Lishuang didn't know that she had read in that book that behind every successful man, there was a woman who silently supported him.If he wanted to be her elder brother Yunfei's good helper, he had to know something about her elder brother Yunfei's career.

Yun Fei was on the side, seeing Ni Lishuang introduced to Li Lu the various techniques used in the production of machine tools, and from time to time he cast a demonstrative look at Li Lu, which made Li Lu very upset.But in the mechanical industry that belongs to men, she, Li Lu, really has no way to compete with this little girl.

From the moment she knew that Ni Lishuang was Yun Fei's fiancée, Li Lu was also very upset with this girl.

Seeing the performance of the two women, Yun Fei had no choice but to walk to the front, constantly speeding up his pace.

What is this all about!One is my god-sister, and the other is my future wife. Could it be that these two women have no way to avoid the biological phenomenon of same-sex exclusion?Or do female animals hide genes that are more aggressive than male animals?

In the machining workshop, Li Lu did not see the prototype of the CNC machine tool she wanted to see.

They are placed horizontally and vertically, as if those old machine tools that are being inspected are rotating quickly or slowly under the skilled operation of the workers.

Although Kamat has been in the trade of imported machine tools for several years, its main direction is CNC machine tools, especially machining centers.Li Lu didn't know which machine tools were used. In the first machining workshop of Jiuyi Heavy Industry, she saw hundreds of machine tools of various sizes neatly arranged in a workshop. Except for lathes, she could barely Familiarity, most of the machining equipment is just not familiar.

This includes a lot of large-scale processing equipment that Kamat transported back from the Soviet Union.

Because of the strong enough production capacity in Jiuyi Heavy Industry's machining workshop, there are only two shifts, including ten hours in the day shift and eight hours in the evening shift. At this moment, most of the processing equipment is rotating at high speed, and iron filings are flying , such a spectacular machining scene, Li Lu couldn't help screaming.

Li Lu's exclamation aroused Ni Lishuang's contempt even more!But it is the most common machine tool equipment, what is there to make a fuss about?

The workers who were working saw that the boss actually brought a woman who made all male animals crazy into the production workshop, and they couldn't help turning their attention from the high-speed rotating workpiece to Li Lu.Ni Lishuang, everyone often sees a yellow-haired girl who hasn't fully grown up, and most of the people in this workshop are Ni Lishuang's elders, so they don't have much experience.

Li Lu is different. She is almost thirty, she is like a ripe peach, with a pair of bulging tight shirts on her chest, a waist full of grips, plump buttocks, black The slender and straight thighs under the silk make it impossible to divert the eyes of those guys who have been staying in the mountains and have not seen any beautiful women.

The performance of the workers made the master chefs who were guarding the scene beside them furious!

Those who are older are more conservative, but occasionally raise their heads to take a quick glance at Li Lu, and immediately lower their heads to pretend to be working seriously; those young people are different, they are afraid that the world will not be chaotic. Whistling; some flamboyant, when operating the machine tool, the two hands seemed to become the automatic tool feeding system under the control of the CNC system, and the movements became more smooth, but the eyes did not look at the moving tool. As a result, the tool hits the fast-moving workpiece, or directly hits the chuck.

Yunfei saw that all the workers' eyes were focused on Li Lu, especially the lathes operated by several young people, who forgot to stop when they were automatically moving the tool, which caused the tool holder to hit the high-speed rotating chuck. Stopping the chuck that was rotating at a high speed, or knocking the workpiece out of it, causing the master next to them to throw a steel chuck wrench at those young people, and hurriedly took Li Lu out of the machining process. workshop.

There weren't many female animals in the machinery workshop, but now seeing a female who is so beautiful and criminally appearing in the workshop, what if nothing happens?

Yun Fei knew that those young people who bumped into knives at work tomorrow morning would definitely be punished, but he didn't feel any guilt in his heart.The quality of these workers in my own factory still needs to be improved.Otherwise, when other customers come to visit the factory in the future, these workers will still behave like this, and the impact will be too unfavorable.

Li Lu didn't react at all to the way those workers looked at her.

In Huadu, as long as I go out on the street, I will attract more eyes, those eyes are naked, anyway, there is nothing less to look at.so,

Even if it caused a few industrial and commercial accidents in Yunfei's production workshop, it was nothing. Anyway, she didn't do it on purpose.

The quality of workers is not high. (To be continued..)