Smart Industrial Empire

"Boss, do you want to..." Jing Hong stopped when he reached the back.

He didn't think that the young boss in front of him had the ability and courage to eat Jinling Machine Tool Factory.Although Jinling Machine Tool Factory has a lot of equipment that has been seen in the 60s and [-]s, and even some of them were supported by the big brother of the Soviet Union before the founding of the People's Republic of China, in this era, it would cost tens of millions to get it.

Huadu CNC has made a lot of money in the past two years, and there are more than 2000 million loans in the bank.If these shareholders want to divide their money, they basically don't want to count on it in a short period of time.

Yun Fei stared with great interest at the new helmsman who had just joined Xinkaixing, trying to see something from his face, but he only saw the disgruntled look on the young new manager's face. The look of believing.

"For a factory with no innovation ability and weak design ability, as long as the head is not caught by the door, who will be full?" Yun Fei said to Jinghong lightly.As for Jinghong, he really couldn't grasp it, so he introduced so many restrictive measures and put several shareholders in the factory to monitor the operation of the whole factory.

Wang Qingfeng was very dissatisfied with Yun Fei leaving him here.With his son who is used to running around now, letting him stay here obediently and stare at the new management of the factory will make him more uncomfortable than killing him.What's even more exaggerated is that Yun Fei actually called the Northeast and called Zhang Rui here...

"Then why are you inquiring about the Jinling Machine Tool Factory?" Jing Hong was surprised. Could it be that the boss is full of food?Or is it that you have been wandering around all over the flowers for the past two days, and you have suffered from heat stroke?

"I don't want their factories and equipment, but I want their people. Tell me about Jinling Machine Tool Factory, especially the situation of skilled workers in the No. [-] Machine Tool Factory..." Yun Fei looked at the tabletop with his hands, Said lightly.

For a long time, Yunfei has entered into a misunderstanding, he has been waiting for those state-owned factories to go bankrupt.But I forgot that before those state-owned factories went bankrupt, a large number of skilled workers in those factories began to lose, especially those main skilled workers who have first-hand skills and are under great pressure to support their families. [

"Jinling No. 300 Machine Tool Factory has completely shut down three months ago. There are more than 600 general-purpose workers and more than 14 special-purpose workers in the factory. There are [-] fitters above grade [-] and two millers. People, there is only one eighth-level car worker, and most of the workers are at the fifth to sixth level. The efficiency of the factory has not been very good, especially in these years, so there are very few apprentices..." Anyway, I was confused in that factory How can you not understand the situation in the factory?Even if he is only a workshop director, it can't stop him, the workshop director, from knowing the situation of the whole factory.

Regarding the situation of a factory, especially a factory that is basically at a standstill, few people are willing to know how many people and equipment the factory has.

"The machine tool production technology of Jinling No. 60 Machine Tool Factory is the technology of the [-]s. For a long time, no factory manager has devoted all his energy to this independent innovation, and even made few changes in the design. In the planned economy In this era, although the lathes produced by Jinling Machine Tool Factory cannot be compared with those large-scale factories with strong technical strength, they are all produced according to the plan arranged by the above. The old man's personality developed over the past few decades has no strength at all after gradually entering the market economy. The more products are produced, the more the backlog will be. In the end, the more produced, the more losses. How much..." When talking about the factory where he used to work, Jinghong sighed.

In the past two years, domestic discussions on the issue of surnamed capital and surnamed society were very heated. It was because of the newly rising private capital that the production of many state-owned enterprises basically came to a standstill.Just like now, in the Chinese market, on the one hand, many state-owned enterprises with rich experience and high production capacity have fallen into a situation where their products cannot be sold; on the other hand, private enterprises, due to insufficient workers and poor technical strength, The backlog of product orders made the boss anxious.

"Jinghong, in the Jinling factory, are there many people like you who come out to make a living?" Yun Fei was unwilling to listen to Jinghong's sighs about their original factory, and directly asked the question he was most concerned about, that is, would those workers be willing? willing to come out.

"Not many, many people are guarding the factory. Most of the workers in the factory are old and unwilling to move..." Jing Hong himself is actually unwilling to move. If he hadn't been forced to do nothing, he would never Go into the sea and go to the golden flower capital to look for opportunities to make a fortune.

It can be considered that he was lucky, unexpectedly met Xinkaixing, which was developing rapidly, to recruit people, and was favored by Yunfei, and became the general manager of Xinkaixing, with an annual salary starting at [-].

Sixty thousand!

In the Jinling factory, the wages are more than 100 yuan and less than 5000 yuan a month. Even with a double bonus, it is only [-] yuan a year. Here, one month can earn the original year's money!Of course, this must pass the probationary period, otherwise, where did it come from, where will it go.

"It's not that they don't want to move, but that they don't have enough price to make them move!" Yun Fei scoffed at Jing Hong's words.

He was about to leave Huadu and return to Rongcheng. The first batch of CNC milling machines produced by Jiuyi Heavy Industry for the market was about to be finalized. At such an important moment, it would be unreasonable for his boss not to be in the factory.

After all, the final assembly and debugging required Yun Fei to watch from the side.

Although Yunfei borrowed several system debugging technicians from Huadu CNC, he had to do it himself to set the machine tool parameters.The time is too short, each batch of experimental machine tools is between two and four, in just two or three months, there is no way to train qualified machine tool debuggers.Most of the machine tool debuggers trained by Huadu NC are for CNC lathes. For them, CNC milling machines are also an unfamiliar field.

Besides, those people are not very familiar with machine tools.

"Xiao Yun, you're back..." Seeing Yun Fei wearing a white shirt and Ni Lishuang, who was only wearing a knee-length tight skirt, came to the CNC machine tool assembly workshop, Situ He Yun and Sun Lin greeted him. up. [

"..." Yun Fei never expected that these two veterans would be so enthusiastic about him!

If you are courteous, you are either a jn or a thief!

"Has the assembly been completed?" Yun Fei ignored the two veterans. Who knows if these two veterans have brought some difficult-to-process things from the Machinery Research Institute to organize technical forces to tackle key problems?

Nima, help them study various mechanical manufacturing techniques. In the end, I don't need much here, but let them get cheap for nothing.Yun Fei also knew that these two veterans depended on him largely because of his understanding of CNC machining technology. If this continues, Jiuyi Heavy Industry will become a scientific research factory under the Machinery Research Institute.

"The assembly has been completed, and the machine tool is being debugged now. Let your boss take a look, and then make a final decision. After you read it, if you think it's okay, our CNC milling machine can now be finalized..." For Sun Lin didn't find it difficult to get started with CNC milling machines.

The predecessor of Jiuyi Heavy Industry, 9327, although the cost of the machine tools produced is high, the technical reserves are still sufficient, especially the production technology of some machine tools. Otherwise, the military would not build such a factory in the mountains just in case.Even if you encounter any technical problems that Jiuyi Heavy Industry cannot solve, you can run back to the capital through two veterans to find their brothers or apprentices and grandchildren for help, or move some technical materials that Jiuyi Heavy Industry does not have to Jiuyi. Come inside the archives of Heavy Industries.

In exchange, Yunfei's Jiuyi Heavy Industry must help those guys in the Machinery Research Institute to solve some problems that are not easy for their skilled workers to solve.This does not mean that Jiuyi Heavy Industry's workers are more skilled than those in the experimental workshops under the Machinery Research Institute.But when it comes to rich experience, those workshops under the Machinery Research Institute are only used to make some experimental products, and there is no way to compare with Jiuyi Heavy Industry.

Yun Fei was born in CNC machining, and his horizons are broad enough in terms of the complexity and processing precision of the parts he sees; dozens of top skilled technicians from the Soviet Union, as well as the top technicians left by the 9327 factory, all do It is produced in a small batch in a single room. In terms of processing technology, it can also be the best in the whole of China.

"Run a few more times, especially the taper when the z-axis stroke moves up and down. This is related to the machining precision..." After the CNC system is installed, the professional data clerk will input the basic parameters left by Yunfei Afterwards, under the control of the debugging program, the machine tool quickly runs back and forth, left and right, and up and down.

The debugger stared at the movement of the machine tool workbench and at the change of the data on the display screen of the CNC system. When a problem was found, he immediately pressed the red stop button on the system and re-entered some data before starting.

The debugger adjusts the parameter settings of the machine tool while the machine tool is constantly moving.

"After the commissioning of these four CNC milling machines is completed, they will be moved to our newly built CNC workshop and put into production. In this way, we can solve part of the problem of our manpower shortage. Although it is a drop in the bucket, it is also a talk Better than it..." The CNC milling machine was able to go on the market, but there was nothing to make Yun Fei happy.

CNC milling machines are still a long way from machining centers. (to be continued...)