Smart Industrial Empire

Yun Fei's words clearly told Wu Zhongda his purpose.

The development strategy of Jiuyi Heavy Industry is to give up some low-profit but high-cost intermediate links, learn from those large aircraft manufacturers to choose suitable supporting factories for the procurement of various spare parts, and combine the few resources of Jiuyi Heavy Industry with Funds are used for market development and research and development of new products.

There is a popular saying in the world that first-rate companies set standards, second-rate companies make brands, and third-rate companies make products.In the CNC machine tool industry, it is an unrealistic strategic goal for Jiuyi Heavy Industry, which has just started, to become a first-class enterprise that sets standards in a short period of time.However, it should not be too difficult to become a second-rate company that makes a brand through its own efforts and full investment in a few years.

In this era, the opportunities are great.

China's CNC machine tool market is still blank. All industry standards come from abroad, and there is no China's own standards.With the continuous development of foreigners' numerical control technology, the threshold of that industry is getting higher and higher. Therefore, no matter how much China catches up in this respect, it cannot even be considered as a second-rate enterprise.

Anyone who went to Yunfei’s world at that time to find a skilled worker in CNC machining would know that no one was optimistic about domestic CNC machine tools.If the domestic CNC machine tool has not inherited the traditional characteristics and habits of Chinese-made products - the price is cheap, it is estimated that there will not be many companies willing to use domestic CNC machine tools!The largest market for CNC machine tools in China is not the state-owned factories, but the small private machinery processing factories and machining workshops that have sprung up like mushrooms everywhere!

If they have a choice, they will definitely not choose those unexpected problems that may appear from time to time, for example, the problem of wandering coordinates during the processing, and you can't find out the reason after you stop.Then process again, and it's normal again!With such equipment, there is no problem in making some low-cost products, but to make products whose materials cost hundreds of dollars per kilogram, such as titanium alloys, high-temperature alloys, nickel-based alloys, etc. A little fault in the process of processing will make the whole product scrapped!

Maybe a live product has thousands or even tens of thousands of processing fees, but the price of the material fee is definitely several times the processing fee!

Many people despise those who use foreign products.Say that others are not patriotic, do not support domestic products, and even curse on the Internet.Yun Fei thinks that such a person is the real **!Those who say that others use foreign high-tech products are not patriotic, and often use more foreign electronic products themselves!

It's not that everyone is not patriotic and does not support domestic products. If domestic products can reach the price of foreign products, are you sticking your head out like a fool and letting others slaughter you?

Nima, buy hundreds of thousands of things abroad.Entering the Chinese market, you have to double it immediately, but the supply is still in short supply!Why?Because our domestic products cannot support the Chinese market!Of course, it does not rule out some second-hand goods who are really cheap.For example, I have to make a bag, a brand-name watch or something just to satisfy my vanity and show off my status.

For a long time, the high-end industry of CNC machine tools has been dominated by foreign brands.I can't blame others for this, but I can only blame the domestic machine tool companies for their disappointment!

How much tax does the state give them each year?More than one-third of the profit per machine tool.What are they doing with all this money?When Chinese people scold, they say that domestic materials are not good, domestic production technology is not good, and even the domestic climate is so bad!

why not?That's not because experts are called experts, and professors are called beasts!Damn, as long as a project is established, no matter how much money the country allocates, the project leader will send half of the price to those leaders who are in charge of appropriating the project to take care of a college student and send a child to study abroad.Then half of the remaining half is used to support college students and replace the new car, and a quarter of it can be used for project research, and the person in charge of that project is a very virtuous guy.

Do the Chinese have integrity?

It can only be said that there must still be ethical people in China!If it weren't for their existence, would our country have developed so fast?

Of course, more of them are Chinese who have lost their integrity.Otherwise, it wouldn't be normal for so many beasts to become famous as soon as they copy it, many women get angry as soon as they take off their clothes, and many officials fall off their horses as soon as they sleep, etc.

Chinese people are scary!At least, in terms of embezzlement by government officials, shameless women who have become famous, plagiarism has become a habit of calling beasts thick-skinned, the principal who raped and prostituted young girls does not dislike the young pupils, and many other aspects All countries in the world can only keep silent!This, even the devil country, which is known for being cheap in the whole world, dare not compare with China!

The world's largest country!

Yunfei has no control over what other people do.

Jiuyi Heavy Industry is Yunfei's territory, Yunfei's territory, and Yunfei is the master.

Therefore, the minimum standard of Jiuyi Heavy Industry must become a second-rate enterprise that makes a brand.Perhaps, it is not impossible to achieve this goal and engage in standards.

Of course, whether it is a brand or a standard, these are too far away.

The most important thing now is to make your own products well.Jiuyi Heavy Industry's CNC lathe, at least, won't be criticized too much.Otherwise, Sun Lin and Situ Heyun, two old fellows, would not have been good academicians and went to Jiuyi Heavy Industry, a small machine tool factory that was just established, to work hard without complaint!At least, Yun Fei, a private boss, has invested far more in research and development than Capital One and Northeast One, which are dozens of times the size of Jiuyi Heavy Industry.

Originally, after the simple fourth-axis project of installing PMC drive module control on the three-axis machining center cooperated with the military last time, the two old guys should bring their apprentices and grandchildren back to the Capital Institute of Machinery.However, these two veterans gave up their extremely low-funded research projects in the Institute of Mechanical Engineering and stayed at Jiuyi Heavy Industry.

Even when Jiuyi Heavy Industry's CNC lathes quickly occupied half of the domestic mid-range CNC lathes, Yunfei still did not give up research on new CNC lathes.Now more than 30.00% of Jiuyi Heavy Industry's monthly profits are invested in the research of various CNC machine tools.Among other things, the tool magazine project of the machining center alone has invested millions of dollars so far!

Now the precision CNC lathe with ten tools has a monthly research funding of more than one million!

Similarly, research on CNC milling machines is also in full swing.If it is not for the purpose of seizing the market and forming a good reputation in China, Yunfei will not even let the CNC milling machine with a speed of less than 10000 rpm and a rapid traverse speed of less than [-]mm per minute be launched on the market.Although, such a CNC milling machine can already be regarded as relatively good performance when domestic production is relatively blank.

"The development direction of CNC milling machines must be high speed and high moving speed, so don't think that if we increase the maximum speed of less than [-] revolutions to the current [-] revolutions per minute, the tail will be cocked." It’s in the sky! Although Capital Yiji is taking the wrong path now, it won’t be long before they wake up, because their current model, no matter what they do, can’t raise the speed very high , [-] revolutions is the limit of their CNC milling machines! Let me tell you a news, the speed of CNC milling machines for aviation aluminum and non-metallic materials in foreign countries can reach [-] revolutions per minute!" For self-developed The milling machine project team of the department had just increased the spindle speed to [-] rpm, so they came to Yunfei to apply for a special fund for the celebration party. Yunfei looked at the project leader seconded by the military with a serious face. Duan Hu taught.

"..." Hearing Yun Fei's words, Duan Hu's forehead was full of black lines.

He was not such a crazy person, but he was encouraged by the guys from the Soviet Union in the project.

Everyone knows that Yun Fei, a young boss, is very talkative. As long as you can achieve results, create benefits for the company, and focus on activity funds, it will not be a big deal.

"If you can increase the spindle speed to [-] rpm, I will personally hold a celebration party for you!" Yun Fei said to the back of Duan Hu who was leaving with black lines all over his head.

"Nimma, if you hold a celebration party every time you increase the speed by [-] revolutions, if the spindle speed of our own CNC milling machine can reach the level of more than [-] revolutions per minute in foreign countries, how can we have so much time? Come to the celebration party!" Yun Fei secretly praised his responsiveness.

In this initial stage, increasing the speed from less than [-] revolutions per minute to [-] revolutions per minute is indeed a remarkable technological leap, especially since the spindle drive of the CNC milling machine currently in use is still conventionally geared and belt driven.

It's not that Yunfei doesn't want to develop an electric spindle, but now it's undeniably impossible to develop an electric spindle that counts tens of thousands of revolutions per minute.When Yunfei proposed the electric spindle, even Situ Heyun and Sun Lin didn't know what the electric spindle was!Even in foreign countries, the test will not be successful until after 2000.This not only has high requirements for materials, but also has very high requirements for testing equipment.

Imagine that a shaft weighing several kilograms rotates at a speed of tens of thousands or even hundreds of thousands of revolutions per minute. If the dynamic balance is not in place, even if the torque difference is only one or two Newton-meters, it will be enlarged to tens of thousands of Newton-meters , or twisting at a high frequency for a long time, if the shaft breaks, who can afford the consequences? (To be continued..)

ps: Thank you Brother Demon Dragon Warrior for your reward!