Smart Industrial Empire

"Uncle, what's the situation in those factories in the northeast?" Jiang Jianxing just came back from the northeast, and before he went to look for Yunfei, Yunfei came to the door by himself.

After the completion of this large-scale acquisition, Jiuyi Heavy Industry will become China's largest machinery manufacturing group.

Such a huge productivity will cause headaches for many competitors.

"The information has not been sorted out, Yunfei, I think we must reduce the scale of acquisitions, otherwise, old man Myron will not be able to pass the test, we are likely to be dragged down by those factories, only a few factories in the 90s The equipment has been upgraded at the beginning, most of them are production equipment from the 70s and 80s, and there are very few in the [-]s..." Jiang Jianxing told Yunfei his feelings about this inspection.

Many of these state-owned factories are equipment imported from the Soviet Union in the 70s and [-]s or produced by China itself based on the technology aided by the Soviet Union.

"I know this. In two years, the land of these factories will not be worth so much money. If you want to develop in an all-round way, you can't do it just by relying on a factory like our Jiuyi Heavy Industry." Yun Fei frowned. .

But what Jiang Jianxing said was true. Although the price given to them by the state is very cheap, in order to optimize the production capacity of these factories, the equipment of these factories must be upgraded on a large scale.

The equipment of the 70s and [-]s can be used for sure.However, the state of technology cannot adapt to modern large-scale production at all. The production efficiency is low and the cost is high. Many state-owned factories in China are manufactured by manpower and time.

so.Facing the reform of the market economy, most state-owned enterprises have become unsuitable.

The rigidity of the system is a problem, and the production cost is the biggest problem.

"If we reduce the number of acquisitions and leave half of the funds for those companies' technical equipment upgrades, and choose products that meet the market, as long as we no longer have a lot of redundant employees, and the production efficiency maintains the efficiency level of our Jiuyi Group, it will be very easy. We will soon be able to turn losses into profits!" This is what Jiang Jianxing has been thinking about the most these days.

The development of Jiuyi Heavy Industry has entered the bottleneck area at present, and the demand of the CNC industry is large.The production capacity of Jiuyi Heavy Industry could not keep up.If we develop more outsourcing supporting units, management will be the biggest problem.

The cost of expanding and building factories by yourself is too high.

Also, a large number of skilled skilled workers cannot be obtained.a new factory.There is not a large number of skilled workers.It takes a long time to form a mature production capacity.

What the Jiuyi Group lacks most now is time.

Foreign CNC manufacturers are about to enter the Chinese market, and Yunfei has received clear news that the [-]th China National Machine Tool Exhibition, which will be held in the capital in late November, has four countries including Germany, Japan, Switzerland and Italy. Five CNC equipment manufacturers will bring their five-axis machining centers to the exhibition!

These international large CNC equipment manufacturers.It must have reached an agreement of intent, first to sell their five-axis machining centers with low precision to Chinese users, so as to seize orders from high-end users in China and prevent Jiuyi Heavy Industry from developing on this.

Jiuyi Heavy Industry already has the production capacity of a four-axis machining center, and it is still in industrialized mass production!

How can this not make their eggs hurt?

It has been blocking China's development in these high-precision and cutting-edge fields, but now it is good, because China's large demand for equipment in this area has instead enabled Chinese companies to have their own production capacity and accumulate research and development experience. How can they not panic!

"Look first, Uncle, you should discuss this matter with Old Man Myron and the others. We can do as much as we have ability, otherwise, our large-scale acquisition this time will not only not become our opportunity, but It will drag us to death..." Yun Fei nodded.

Still not enough money.

If the funds are sufficient, such a good expansion opportunity will not be given up at all.

In the past, those large machinery groups in China, such as Dongbei Yiji, Capital Yiji and other companies, all annexed many of the same type of machinery factories at this time, so that they were able to develop so rapidly and get involved in a short period of time. Among the top [-] companies in the world!

However, in this world, they don't have that ambition to expand.

Jiuyi Heavy Industry is a roadblock on the road of expansion of all Chinese CNC equipment manufacturing enterprises.If you want to expand, you must grab the market from Jiuyi Heavy Industry!In the three-axis machining center market, although they have the production technology of Jiuyi Heavy Industry, they still cannot compare with the entire Jiuyi Heavy Industry.

The efficiency of the September [-] Research Institute, the largest non-governmental scientific research institution in China, is unmatched by any Chinese company.

And no company dares to invest in scientific research like Jiuyi Heavy Industry.

The Jiuyi Research Institute also has the same advantage that many companies do not have - the numerical control equipment produced by Jiuyi Heavy Industry uses a numerical control system, which is independently developed by them.

Only by researching and developing by ourselves can the equipment produced by ourselves achieve the highest design precision!

"Old Sun, are there any problems with these four-axis?" Jiang Jianxing went to discuss the acquisition with the old man Myron, and Yun Fei went to the assembly workshop of the machining center again.

Sun Lin, Situ Heyun and others, who have been worried all the time, have been guarding the assembly workshop these days.

"Boy Yun, can't you have some confidence in us?" Situ He Yun, whose back was already bent, lightly knocked Yun Fei on the head, and said to Yun Fei dissatisfied.

"Uh, isn't this batch of products too important? You don't have any confidence. Where did the boy get his confidence? The wolf is coming soon..." The development time is too short, and this is the eternal pain in Yunfei's heart.

"How is your acquisition in the Northeast?" Sun Lin is also old. In the past few years, he has been far more tired in the Jiuyi Research Institute than they were in the National Machinery Research Institute. The two old men were forced to send home when the time came. It is estimated that they would have to work as hard as those young people.

"For the time being, we haven't considered which ones to acquire. The Ministry of Machinery Industry has given us too much. Our financial resources are not enough to deal with such a large-scale acquisition. Complete acquisition is impossible. We can only choose some acquisitions with development prospects. ..." This old man is really, getting old, but worrying more.

Sun Lin never cared about any development plans of Jiuyi Heavy Industry before, and spent every day doing research.

"Boy Yun, I discussed it with Lao Sun. After these four-axis deliveries are delivered, we will concentrate on leading graduate students and stop doing research. What do you think?" Situ He Yun's words made Yun Fei's heart skip a beat trembling.

"Okay, old man, are you going to go back to the capital or stay in Rongcheng? The environment in Rongcheng is much better than the capital, and there is no wind and sand, so it is suitable for the elderly..." Yun Fei paused, rolled his eyes, and looked at The two old men replied.

"What's your plan, don't we know? Boy, don't worry, many old guys are planning to stay in Rongcheng to retire. As long as you can get the Ministry of Education to agree that your research institute has the qualifications to recruit graduate students, we will help you bring It's..." Sun Lin said heartily to Yun Fei.

In the past two years, a group of young people such as Deng Lanqing have grown up. These old guys should vacate their positions and let Jiuyi Heavy Industry cultivate talents. Otherwise, if something happens to them, some projects of Jiuyi Research Institute will be destroyed come to a standstill.

And their energy is getting weaker and weaker. It is okay to lead students, but it is no longer possible to lead research work and even devote themselves to it.

"Although we have produced this batch of four-axis, it has also met the design accuracy requirements. This processing accuracy is incomparable with the ep6 imported from Germany..." Sun Lin sighed, even though it took more than five years. With a lot of basic technology from the Mechanical Research Institute, as well as Soviet mechanical technology, the products produced with great difficulty are not comparable to the ordinary four-axis machining centers in Germany in the 80s.

Among the four-axis machining centers, the precision level of ep6 is not the highest, otherwise it would be impossible to export to China.

"That's it for now, as long as it can be produced, we will continue to research and improve in the future! We started too late, and our foundation is not comparable to those industrial powerhouses. It is also very good to be able to launch such a product now!" Yun Fei sighed.

He also wants to produce a four-axis machining center with the highest level of precision at once.

I even want to produce a five-axis machining center right away.

However, he knew that this was simply unrealistic.

"Xiaoyun, I discussed with Mailun and the others. Myron and the others also meant the same thing. We are currently purchasing eleven factories including Hongqi Machinery Factory, Northeast Forging Factory No. 8000, and Harbin Mining Machinery Factory. The funds needed for the acquisition are about 2000 million. , the purchase price of Hongqi Machinery Factory is expected to be [-] million..."

After three days of discussion, the top management of Jiuyi Group unanimously agreed to reduce the scale of the acquisition, and upgrade the equipment of these factories immediately after the acquisition to quickly form a completed production capacity.

"More than 3 million can complete the technological upgrade of these factories?" Yun Fei asked doubtfully.

"No, far from it. If it is all completed, it will require more than one billion yuan!" Jiang Jianxing shook his head and said a number that made Yunfei's head big.

Jiang Jianxing saw Yunfei's frowning face, and immediately said to Yunfei: "Myron's team suggested that we can first upgrade the technology of Hongqi Machinery Factory and Northeast Forging Factory No. 90. The main reason for the closure of these two factories is the serious aging of equipment and management The level was so poor that it led to bankruptcy. Among them, the Northeast Forging Machine introduced a lot of technology and equipment from Germany and the Soviet Union in the early [-]s, and now it can produce a maximum of [-] tons of heavy hydraulic presses..." (To be continued.. )

ps: Thank you llq624ll for your big monthly pass.