I am an artillery soldier

Chapter 380 Screw Forming Machine Completion

After learning that these two types of machine tools were designed by Liu Gen, who just came to the lathe department, everyone present was a little silent. They didn't expect these two drawings to be designed by Liu Gen.

They have been working in the lathe department, but they all know how difficult it is to design new machine tool drawings. In addition, there are not many experts in machine tool design in the arsenal. If they want to redesign a new machine tool, it will be quite difficult. Difficulties.But now?Liu Gen designed two new machine tools in a short period of time. Doesn't this mean that they are useless?

Even Liu Gen, who just came to the lathe department, was able to design two new machine tools, but they didn't make any movement. Compared with Liu Gen, the people present seemed much worse.

"I didn't expect Captain Liu to design it. When I came here before, I had guessed it, but I couldn't believe it."

"Looking at it now, Captain Liu is indeed a genius. Without any higher education, he was able to design two machine tools after designing two mortars. Captain Liu's talent is far beyond ours. " Kong Jue's voice sounded, he was always indifferent, but now he looked at Liu Gen with some fiery eyes, as if he was looking at some beautiful woman.

That's not true, for a person like Kong Jue, even if a beautiful woman appeared in front of him, he might not have any reaction.

All the people present looked at Kong Jue with complicated eyes. From a rational point of view, they knew that what Kong Jue said was right. Being able to design two kinds of machine tools undoubtedly fully proved Liu Gen's ability.Even though the two machine tools designed by Liu Gen are a bit crude, and even a little backward in some respects, they are enough for the current arsenal.

It is even said that if Liu Gen designs too advanced machine tools, the arsenal may not be able to manufacture and use them.

"Kong Gong was joking. The comrades present are all my seniors. I was able to design these two types of machine tools. I was completely lucky. Besides, I still have a lot to improve on the seniors." Liu Gen said very sincerely. Said.Liu Gen knew why he was able to produce the blueprints of these two machine tools. He was also working and knew the abilities of everyone present. Compared with everyone present, Liu Gen really felt that he still had a lot to learn.

Chief Qi looked at Liu Gen with satisfaction. He knew that he was right about Liu Gen. Even though he had designed two new machine tools, Liu Gen was still humble enough, which is extremely rare.

"Genzi is right. The comrades present are the backbone of our lathe engineering department, and they are the technologically advanced members of our lathe engineering department. Genzi's learning ability is good, but compared with everyone, there is still a big gap. Comrade, you need to guide Genzi a lot, and strive to let Genzi grow up early, so that everyone can relax." Chief Qi said with a smile.

"Easy to say, easy to say."

"For a genius like Genzi, our Lathe Engineering Department needs to cultivate them vigorously."

"Yeah, I think so too."

"..."

Generally speaking, Liu Gen is very satisfied with everyone, they can all see Liu Gen's respect for him, which makes them have a lot of affection for Liu Gen.Everyone will like to be able to maintain enough humility after achieving certain achievements.

"Captain Liu, these two new machine tools are good, but I wonder if you can explain to me the idea of ​​designing these two machine tools?" Kong Jue's voice sounded again.

Kong Jue looked at Liu Gen seriously, and asked Liu Gen boldly. He knew that Liu Gen might have other ideas, but Kong Jue didn't care about it.For Kong Jue, he only wanted to solve his confusion in the shortest possible time, and he didn't care how Liu Gen viewed him.

The others looked at Liu Gen, wanting to know how Liu Gen would answer, and they also wanted to know Liu Gen's thinking in designing these two machine tools.It's just that they know it's not suitable to ask now, and asking Liu Gen rashly may make Liu Gen feel that he is suspicious of Liu Gen.Now that Kong Jue asked directly, they would naturally get a little credit, and let's see how Liu Gen would answer.

"Gen Zi, don't worry about it. Kong Gong has such a personality. In our lathe department, due to Kong Gong's personality, few people usually come to his side, unless there is a problem with the machine tool that cannot be solved."

"Kong Gong's personality is not very good, but in our lathe engineering department, his technical level is one of the best. Speaking of which, Kong Gong has not been in our lathe engineering department for a long time, less than a year. He is a student of Yenching University. Talented students." Chief Qi was worried that Liu Gen would be angry, so he quickly explained.

Liu Gen's expression didn't change much, instead he showed a smile. He understood why Chief Qi would explain for himself.Their eyes fell on Kong Jue, and the two looked at each other. Liu Gen was sure that Kong Jue really had no other evil intentions. At least from Kong Jue's serious eyes, he really wanted to get an answer from Liu Gen.

"Qi Gong, I know. During the time I was in the lathe department, I also heard about Kong Gong's deeds."

"I believe that everyone wants to know my thinking on designing these two machine tools. Today, while everyone is here, I will talk about it in detail."

"..."

Liu Gen seriously explained his thoughts on designing these two machine tools in exceptional detail, wishing to tell everyone present all his understanding and thoughts on these two machine tools.Liu Gen knows that the arsenal has a lot of talents, and there are also a lot of talents in the lathe department. If everyone can design a machine tool, the arsenal will soon expand again.

Everyone present listened carefully to Liu Gen's explanation. At the beginning, everyone was still smiling. After 5 minutes, everyone took out their notebooks and carefully recorded Liu Gen's explanation.During Liu Gen's explanation, what everyone learned was a new way of thinking. There were some things they didn't understand, and they recorded what they didn't understand, and asked after Liu Gen finished explaining.

Half an hour later, when Liu Gen finished his explanation, everyone's eyes on Liu Gen changed significantly.There was no problem with the way everyone looked at Liu Gen before, but what was more important was the way they looked at young people.But now, the people present no longer dared to regard Liu Gen as a young man. From Liu Gen's explanation, they knew that Liu Gen had his own understanding of machine tools, and even said that some areas were better than them.

Everyone is not a fool, knowing that Liu Gen is better than himself in some ways, so naturally he wants to learn more from Liu Gen and make them better.

Chief Qi looked at the people present, and could clearly see the changes in everyone, and such changes were what he wanted to see.As the head of the lathe department, what Chief Qi hopes most is to see the continuous improvement of the technical level of the lathe department. Before Liu Gen came to the lathe department, the workers of the lathe department would gather together every week to discuss how to operate the machine tools. problems, as well as their own work perception.

It is also in this way that the technical level of the workers in the lathe department can be continuously improved, allowing the lathe department to invest in production in the shortest possible time.

"Genzi's explanation is over, but the work of our lathe department is not over yet. Everyone, get ready! Once we get the approval of Director Cheng, then we will devote ourselves to the production of these two machine tools, and strive to complete them in the shortest possible time. Make these two machine tools." Chief Qi said seriously.

Liu Gen and others responded in unison: "Yes!"

On the second day, Chief Qi transferred some workers from the lathe department to invest in the manufacture of screw forming machines and bullet reloading machines.In order to ensure that there are no problems in the process of manufacturing the two machine tools, Chief Qi specially selected some workers with high technical level to ensure the precision of the two machine tools during manufacture.

As the designer of these two machine tools, Liu Gen naturally joined in the manufacturing of the machine tools. In the process of manufacturing the machine tools, Liu Gen and others put in extra effort, day and night. Sometimes in order to polish a suitable part, they would Do it again, and after more than a dozen parts are hand-polished, the most suitable parts can be manufactured.

Originally, Liu Gen thought that with his own design drawings and his own presence, there would be no major problems in manufacturing machine tools, but in fact, many problems occurred in the process of manufacturing machine tools.The biggest problem is the accuracy of machine tool parts. In order to ensure that the machine tool parts have sufficient accuracy, everyone will put a lot of energy into manual grinding.

But even so, mistakes will inevitably occur, and mistakes mean that new parts need to be re-polished by hand.There is no way for Liu Gen and others to choose to manually polish the machine tool parts. Who makes the arsenal not have suitable equipment?
It took a full week for Liu Gen and other talents to successfully manufacture the screw forming machine. As for the bullet reloading machine, it still takes a certain amount of time.

In the Turning Department, Liu Gen looked very excited when he looked at the ugly screw forming machine in front of him.Only those who have experienced the process of grinding parts and manufacturing machine tools by themselves will know how difficult it is to manufacture such an ugly machine tool.In the process of manufacturing this machine tool, the technical level of Liu Gen and others has improved to a certain extent. If they are asked to manufacture a new screw forming machine, then they will definitely have a lot easier.

"Genzi, I'm going to start this screw forming machine and see how the machine tool we made by ourselves is doing." Chief Qi patted Liu Gen on the shoulder and said with a smile.

Foreman Qi was also a little bit embarrassed. In order to manufacture this screw forming machine, the Turning Department spent a lot of energy, but in the end it was able to successfully manufacture this machine tool, and everything was worth it.

The factory manager Cheng on the side looked at this ugly machine tool with full expectation. For the arsenal, this machine tool has a very special meaning. If it can manufacture this screw forming machine, then the arsenal will definitely be able to manufacture more machine tools in the future. .Director Cheng seems to have seen the scene where the arsenal is booming and producing a large amount of weapons and ammunition every day!

(End of this chapter)