star wars strongest infantry

Chapter 389 Design Drawings

Written on that piece of paper is a complete set of manufacturing process, from the initial selection of materials to the production of each component after that, it is written clearly and plainly, and on the top of the paper is a picture— —Schematic diagram of the big gun Turner is talking about!
Stan Lee took a brief look at the picture, roughly reproduced it in his mind, and said with a smile: "It's really a big gun. Yours is already considered a heavy gun. I tried it just now. If it wasn't for the specially trained elite For a sniper, it is almost impossible to carry it and shoot. The huge recoil caused by the several internal structures you designed is enough to shatter the shoulder of an ordinary soldier, and this one, let alone others, In terms of volume alone, it’s half the size of that one, right?”

"That's right." Turner nodded and said, "There are two reasons for this design. One is that my muscle growth has accelerated in the past year, and my size has also increased a lot. It is designed for the body volume of the gun, and it is a bit small to use now, another one, with such a large gun body, I can add more things inside to increase its power."

"Well, that's true, but in this way, this gun can almost be said to be tailor-made for yourself, compared to that... you call it a smasher, right? It's more versatile than that gun Worse than that," Stan Lee said.

It’s no wonder Stan Lee thinks this way. As an old man who has worked in the Federal Academy of Sciences for decades, the Declaration of the Federal Academy of Sciences “Reasonably Combining Science and War” has been deeply rooted in his heart, so no matter what he does, he always brings it with him. Looking at this aspect, if you want a piece of equipment to be suitable for war, the most important point is universality. Only equipment that can be equipped and used by most soldiers is good equipment, so after seeing Turner's After this design, he also raised this question unconsciously.

Just after finishing speaking, Stan Lee himself felt something was wrong, and said with a smile: "It's no wonder, this is something you use in the first place, and there is nothing wrong with making it so targeted. It is my inherent thinking that is wrong. "

Turner smiled lightly, did not answer, picked out a piece of ore from the ground and said, "Then, let's start."

All of Turner's ideas for updating and improving equipment came about after he got the piece of Tubertan metal (star), so almost all of his designs revolved around that piece of metal, and this big gun naturally also had Indispensable.

A gun, especially an energy gun, has three most important parts.

The first one is the energy box, which is equivalent to the magazine of the gunpowder weapon, but it has more functions than the magazine, because unlike the magazine that supplies one bullet at a time, the energy box is different from the corresponding weapon. The energy that needs to be supplied within a time period is also different. For example, Vulcan and Breaker, the energy used to form an attack differs by nearly 5 times.

This was not a problem in the past, because even for the Breaker, the required unit time function was within the carrying range of the existing energy box, so Turner specially made the place where the Vulcan and Breaker installed the energy box. It has become a regular model, and only needs to use the existing regular energy box.

However, the energy required per unit time of the big gun designed this time has far exceeded any existing energy box. Therefore, the first thing Turner needs to solve is the function of the energy box.

The second is the energy conversion and compression module. The function of this module is to convert and compress the energy supplied by the energy box into a kind of attack energy, or energy rays, or energy bullets. The most important part of this module is to draw energy from the energy box. The amount of energy available, and the subsequent conversion rate of that energy.

On this point, Turner has done a very good job when making the Breaker. He can absorb less than 1100 energy level energy from the energy box at a time, and then convert it into a 1000 energy level energy bullet. It can be said that it has almost reached 100 energy level. % conversion utilization rate, which is very scary, and the general firearms can reach 70% in this respect, which is considered very good.

The third is of course the gun barrel. As a component that guides energy rays or energy bullets to make them enter the correct trajectory, and at the same time bears the pressure caused by huge energy, the gun barrel can be said to be the most important part.

If you want to be able to carry a more powerful attack, the barrel must first be strong enough. This has already appeared when making the Breaker. The attack power of the Breaker reaching 1000 energy level is no longer an ordinary barrel. Affordable, and in the absence of better materials at the time, Turner had to use a multi-split spiral barrel design, which successfully solved the problem, and this time, despite better materials, But Turner is still planning to adopt this design. Of course, if you want to get better results, of course you can't completely use the original design, so Turner wants to improve to a certain extent on the basis of this design.

"Now the most commonly used materials for energy boxes are almost all Toppler plastics. Because the energy conductivity of this material is almost zero, it is not an exaggeration to call it an insulator, so the possible energy loss is also almost zero. , Moreover, the hardness of this material is also excellent enough, and it also has the effect of waterproof and fireproof, making it suitable for most combat environments."

While carefully looking at Turner's design, Stan Lee said: "But this obviously does not fit your design, because the capacity of Toppler plastic is not good, and the energy that can be accommodated per unit volume is not much, and For the big gun you designed, if you use this material to make the energy box, you will either have to fire two shots to consume all the energy, or you have to make a huge energy box. Both of these situations are obviously wrong. Yours There is no explanation on this design drawing, you have not thought of a solution, or?"

"Of course there is a solution." Turner said with a smile: "And it's very simple, so simple that there is no need to write it here. Since the capacity of Toppler plastic is not good, just find a material with good capacity. Then, wouldn’t it be good to wrap a layer of Toppler plastic on the outside? As long as there is no reaction between this material and the Toppler plastic, and it is absolutely inert, it’s fine.”

Stan Lee was startled, then shook his head and laughed: "Sure enough, my fixed thinking is too serious. I said before that I don't want universality, but I still brought this kind of thinking in unconsciously. The kind of material you mentioned is not No, just saying this, I have already thought of several kinds, but I can’t mass-produce them, so I automatically filter them out, hehe, now it seems that there is another advantage to working with you, that is, being able to be active Old man, my thinking mode is almost rigid, yes, yes."

Turner said with a smile: "Then, let's get started."

(End of this chapter)