star wars strongest infantry

Chapter 390 Energy Box

As one of the best masters in the entire universe, although Stan Lee does not have the advanced knowledge that Turner has been ahead of the world for decades, the knowledge he has mastered is absolutely super massive. Therefore, after Turner said the idea , He already thought of several kinds of materials at the first time, and then contacted the piece of paper with materials written on it and the Tibetan metal (star) that Turner gave him, and immediately came up with the answer.

Stan Lee picked out a few materials from the pile of materials on the ground and threw them to Turner, saying: "If you don't have any new ideas about this material, then this should be the most suitable for your needs. Excellent, it is absolutely inert to Toppler plastic, and its only disadvantage is that it has a certain energy conductivity, which may cause energy loss for no reason. However, if it is covered with a layer of Toppler plastic, this There will be no problems."

"You are always astute." Turner took the materials and gave Stan Lee a thumbs up. Stan Lee was right. Although he didn't specify the name of the material, he only picked it from Stan Lee. Turner already knew what kind of material he was talking about.

"Does that mean I guessed it right?" Stan Lee asked, then pointed to the sculpture of the Hundred Buddha Banquet placed beside him and said, "Then, I dismantled this one?"

"Unpack!" Turner nodded bluntly, then took off the last small bag on his back, took out a box from it, and said, "If possible, use these tools for these basic tasks!"

There is a whole set of basic tools in that box. Compared with ordinary tools, every tool in it is very delicate, and looking at the traces on the tools, it can be seen that those tools have gone through a very long time. It's a good thing Turner got from that little shop in the dark star - the master's toolbox!
Stan Lee was stunned and said: "I only know that some veterans are used to using some of their own tools. I didn't expect you to have this habit when you are young."

That's what he said, but he still took the toolbox, took out a few tools from it, and helped Turner handle the materials.

The sculpture of the Feast of the Hundred Buddhas was the first to be used for surgery. After seeing Turner's design drawings to determine the size of the energy box, Stan Lee completely ignored the great artistic value of this sculpture, and took a small hammer Walking over, he knocked off the 3 Buddha statues neatly, and took them to the workbench without any other tools. He just used a small hammer to smash the 3 Buddha statues into a pile of slag. .

Then, he took several other previously selected materials and got busy.

Of course, Turner was not idle. At the same time as Stan Lee started, he also started to make molds with the equipment on the workbench. The metal needed to make this kind of container parts, of course, cannot be made of materials like plastic. That has such good ductility and plasticity, so while smelting the metal, the mold must be made in advance, and then it can be poured directly.

All of Turner's designs this time are tailor-made for himself, and every part is like this, just like this energy box, its volume and weight are most in line with the structure and strength of Turner's palm, and it is exactly the same. It is for this reason that Stan Lee said that such a design cannot be mass-produced at all.

But such a design has an advantage, that is, Turner can maximize the effectiveness of these equipment.

There are two main points to pay attention to in the production of the mold. One is that the mold itself will not be easily deformed. The other is that the material used in the mold must be absolutely inert with the material that will be poured into the mold, that is, they will not Make any changes, so as to ensure the absolute integrity of the final parts.

Of course, these are also designed by Turner in advance.

Picking out a few pieces of material to be used for the mold, Turner waited until Stan Lee had finished processing the materials and freed up the tools, then took over the tools and continued to process them. Of course, it was not that he really had the habit of only using one set of tools, but Using the tools in the master's toolbox to process and produce things has a high probability of being the best. Of course, Turner will not miss such an opportunity.

Although the equipment and instruments in Stan Lee's studio are advanced, they are only basic tools, not top-quality, and the things they make are 100% not top-quality. Between the two, of course, Turner can use the master's toolbox to Use the Master's Toolbox, which is why Turner can use these equipment with only the skill points for basic tools.

Both of them are masters in these aspects. When the design drawings are perfect enough, there is no difficulty in the rest. Everything is going on in an orderly manner. Soon, Stan Lee has processed all the materials. , started the final smelting process, and Turner also completed the production of the mold, followed by 20 minutes of mold cooling time, taking advantage of this time, Turner started the production of the energy supply port of the energy box.

This part is not as simple as making an energy box, every step is a very meticulous operation.

For the energy supply port of the energy box, the most important issue is the amount of energy output per unit time. Of course, this amount depends on the amount absorbed by the energy compression conversion module, and what the energy supply port of the energy box needs to do is to satisfy 100% of the energy. Energy requirements of the compression conversion module.

For example, if an energy compression conversion module needs to absorb 1 units of energy within 100 second, but the energy supply port can only flow 80 units of energy during this time, this will lead to insufficient energy supply, and as a result, either The resulting energy rays or energy bullets are not powerful enough, or cannot form an attack at all.

There are two main designs for the general energy supply port. One is to increase the area of ​​the energy supply port, that is, to expand the energy circulation channel. At the same time, before the energy enters, the energy is first compressed so that the same amount of energy, It occupies fewer passages when passing through the energy supply port.

Turner's train of thought did not deviate from these two directions, and mainly focused on the latter train of thought.

Since he has a big body and his palms are larger than ordinary people, the custom-made energy box is also more expensive than ordinary energy boxes. Therefore, Turner's idea is very simple, that is, to make the energy compression device at the energy supply port into a stack. Compression, the energy is transmitted after repeated compression.

Compared with the general single-layer compression design, his design has two advantages, one is to increase the amount of energy supply, and the other is to extend the function of the energy compression conversion module, and start the energy compression from the energy box Transformation, and the final result of doing so is that the energy of the emitted energy rays or energy bullets is more concentrated and more powerful!
At this time, Stan Lee also finished the main work in his hand, stopped and looked at Turner, saw that he was starting to perform meticulous operations, he couldn't help but became interested, and asked: "Boy, this is a delicate work. One trembling can cause the entire device to be scrapped, can you do it? How about me?"

Turner smiled lightly and said, "I dare not say anything else. In terms of the stability of the starting hand, if I take the second place in the entire universe, no one can take the first place. Besides, this is not sinful and detailed. It's behind, so just watch."

"Okay, then I'll wait and see." Stan Lee didn't mind Turner's almost arrogant self-confidence, folded his arms around his chest, and watched Turner start to operate with a smile.

(End of this chapter)