Otherworld's Organ Master

Chapter 29 Quick Promotion

"Swipe, swipe, swipe, swipe", the clear and continuous voice continued to come, with a certain rhythm, which was obviously very monotonous, but it made people feel pleasant.

In the Limu area, a vigorous figure crouched halfway, holding a small silver axe, swinging it continuously and then chopping it down.Every time the ax is struck, the bark and white wood are neatly separated, there is no white on the dark brown bark, and there is no dark brown on the white wood.

He lightly separated all the veneers with a few axes, and then laid the wood horizontally. With a wave of his hand, the tools of the left and right hands were switched over, and with a few saws, the log was divided into several sections.

"You..." The intermediate mechanism engineer frowned and shouted, "Stop!"

Chang Ming raised his head and looked at him suspiciously.

The manager of the middle-level mechanism engineer strode forward and said angrily: "Is there anyone who works like this? You don't even measure it. How dare you guarantee that each piece is exactly fifty?"

As he spoke, his eyes swept over the stake, and he immediately let out a soft "hiss".

Without a wooden ruler, he couldn't tell the length of the stake, but he could tell that each piece of stake was exactly the same length!
Chang Ming smiled: "It may not be accurate, but I can guarantee that it is accurate to the centimeter."

The mid-level agency teacher raised his head and reprimanded: "A mere agency apprentice dares to speak louder!"

Without saying a word, Chang Ming raised his toes, and a wooden stake flew up, and he held it in his hand.

He picked up the wooden ruler that every apprentice in the institution must have, compared it, and said with a smile: "Fifty centimeters and three millimeters, it's still within the required range."

The middle-level mechanism engineer glanced at him, and his face immediately changed.

The higher the level of the organist, the higher the requirement for accuracy.However, as a ruler for accuracy standards, it is not easy to make.

It is said that in the earliest days, although the gods taught mechanism skills, the various rules were chaotic, and everyone used different weights and measures, and it was almost impossible to communicate with each other.At this time, a celestial creator named "Michi" and the most senior mechanism division at that time discussed together and determined the length unit of the mechanism.After that, units such as meters, centimeters, and millimeters became popular and became the standard.

How long should a meter be, how to divide a meter into [-] centimeters, how to divide a centimeter into ten millimeters in more detail... This wooden ruler alone has countless knowledge.

At that time, Master Michi passed down a steel ruler made of meteorite, called "Qingtian Ruler".The Optimus Ruler is exactly one meter, with centimeters and millimeters equally divided on it.Afterwards, this Optimus Ruler became the standard for all meter rulers. These wooden rulers that must be lowered in the factory were "invited" samples from the agency guild at a high price, and then copied them.

High-level mechanism masters have their own sense of length accuracy, but like Chang Ming, who can saw the crossbar almost without hesitation, and the gap between them is less than half a centimeter, which is by no means the ability of ordinary mechanism apprentices!

The manager of the middle-level mechanism engineer weighed himself, and found that if he looked at it for two seconds, he probably could do it.But so fast, it's almost impossible to see...

He looked at Chang Ming, and suddenly asked: "Can you guarantee such precision with each short log?"

Chang Ming didn't speak, and glanced lightly at the pile of wood beside him.Indeed, although they have not been measured, it can be seen that the piles are stacked together in this way, and the lengths of the piles are the same, as if they were sawn off...

The mid-level mechanism engineer pondered and said: "Such a big one can be so accurate, but what about a small one...you know how to make basic accessories?"

Chang Ming nodded and said heartily, "I can do it!"

The middle-level organ engineer asked: "What is the success rate, what is the ratio of standard parts?"

Chang Ming touched his nose, and there were some white sawdust on the tip of his nose, which was quite funny.But no one would make fun of him at this time, everyone was waiting for his answer.

Chang Ming said: "The success rate is 100%, and the ratio of standard parts... 40%."

When he heard the 100% in the front, the middle-level mechanism engineer's eyes lit up, and he shook his head in disappointment when he heard the 40% in the back. 40% of the standard parts, that is to say, there are still 60% rough or inferior.As a mechanism apprentice, this result is certainly good, but there is still some gap with the expectations of the intermediate mechanism teacher.

He nodded and said, "That's right, you're new to the factory, so take your time according to the rules. We're going to finish processing this batch of long logs today..."

Seeing his expression, Chang Ming was taken aback for a moment.He knows that there are a lot of skilled workers in the factory. Could it be said that 60% excellent workers are nothing here?
The intermediate mechanism engineer misunderstood Chang Ming's level and didn't bother to pay attention to it. He glanced at the workers standing beside him blankly: "Don't stand there and watch, work honestly, and don't be lazy!"

Chang Ming smiled and said, "Hey, don't worry, it will be over soon!"

The intermediate mechanism engineer was just about to walk away, when he heard his words, he was suddenly taken aback.

It's over soon?

He couldn't help but look at the sky, it was only three poles in the sun, how could a day's workload be "finished soon"?

As soon as he came here, Chang Ming's movements attracted all his attention, and he hadn't had time to look at the progress of the work.At this time, I took two more steps, and immediately saw a large amount of wood piled up in the corner.

These timbers, the original and the sawn ones are placed in the same place, one on the left and one on the right.Now there are very few on the left, and the right is almost full!
This, is this done? !
"My lord, all these have been dealt with, what should I do next? Shall I ship another batch to the warehouse?" Chang Ming asked with a smile.

The steward reflexively reprimanded: "What kind of luck? These are enough for the whole day..."

Only then did he come to his senses, looked Chang Ming up and down, and after a while, a smile appeared on the corner of his mouth: "Good boy, you are waiting for me!"

Chang Ming said with a smile: "Don't dare, this is really not enough work!"

The manager hesitated for a moment. Since he came to the factory, such a thing has never happened.The number of people involved in each process and the amount of workload are all particular.Basically keep these people in this process busy from morning till night.Generally speaking, the materials prepared in front are a little more, and there will be some wood left after working every day.No matter how much you deal with, you can only save it for tomorrow.But there is another day tomorrow...

Now there is an extra one for ten people in this link, and the work of this link is finished first, what should I do?Put these workers on leave?How is this possible, there is still most of the day!
Moreover, each worker’s salary is a basic salary plus a piece-rate commission. Chang Ming does 80% of the work, and the rest of the workers can only get 20% of the piece-rate salary. For them, even vacations cannot make up for it.

The steward looked at this guy who broke the rules. This guy had a sunny smile on his face, and it was hard to be offensive.Moreover, his purpose is clearly revealed...

Just break the factory rules like this and promote him before the time?
A smile suddenly appeared on the corner of the steward's mouth, and he said, "That's right, you're done with the work in this area, you can go to the polishing area to do it. Now, you can do the rest!"

He said the last sentence to the workers in Limu District.They were stunned by Chang Ming's craftsmanship, and after listening to the steward's words, they quickly nodded and bowed in agreement.

Chang Ming greeted them with a smile, and whispered a few words to Lu Ding.

Lu Ding was also in a daze, but when he heard Chang Ming's words, he looked at him thoughtfully, and finally nodded.

The steward looked at Chang Ming maliciously, shook his head and walked away. Chang Ming scratched his head, winked at Lu Ding, and walked towards the polishing area.

Lu Ding turned to the workers and said, "Everyone..."

He has always been taciturn and rarely communicates with such people.At this time, I just got stuck when I opened my mouth.But thinking of Chang Ming's smile and the attitude of facing strangers like a fish in water, he collected himself and said again: "Everyone, Brother Chang just said that he is sorry for robbing everyone of your work just now. In the cafeteria tonight, he treats you!"

Some of the workers were whispering, and when they heard Lu Ding's words, they immediately smiled: "Everyone eats according to their skills, so there is no one who can't grab it. There are seven or eight people here, how can Xiao Chang spend money?" .”

Lu Ding laughed suddenly: "It's okay, he's a good crafter and earns a lot of money, so we'll eat him!"

His words made the workers laugh, and they all nodded: "Yes, eat his!"

Lu Ding looked at everyone's smiling faces, took a deep breath, and laughed too.

Wood sorting is the first link in the wood factory, and polishing is the last link, and it is also the most labor-intensive link.

All kinds of accessories in the wood workshop are made of wood. After cutting, the knife marks and burrs on the surface must be cleaned by grinding.After polishing, a layer of glue paint called "Luojiao" is applied, and the production is completed, waiting for sorting.

Grinding is more skillful than Limu.Because if the hands are heavy or distracted, it is very likely that the original standard accessories will be rough or even inferior.Therefore, there are supervisors to supervise the front and back of this link.If you make a mistake and damage the accessories, not only will you not be able to get the piece-rate salary, but you may also have to deduct it backwards.

The steward had already greeted him in advance, and when Chang Ming came over, the person in charge of this link arranged a position for him and briefly introduced the requirements of this link.The person in charge is an old worker who has worked in the factory for seven years. He repeatedly emphasized to Chang Ming that the accessories must not be damaged.Chang Ming listened carefully and nodded repeatedly.

The tool for grinding accessories is a kind of animal fur called sand rhinoceros.Sand rhinoceros is not a strange beast. Its skin is hard and rough, as if countless sandstones have been glued to it. It is as useful as sandpaper, but it is much more durable than sandpaper.This is a special tool for the grinding area, and it is strictly forbidden to bring it to the factory area.

Chang Ming took the sand rhinoceros skin and observed it carefully.He didn't start polishing right away, but asked the foreman for a discarded part, and tried the hardness and feel of the sanded rhinoceros.The foreman's eyes were a little strange, but he still met his request.

Chang Ming tried for about 5 minutes, and there were three parts waiting to be polished in front of him, so he picked them up and started working.

The foreman had been paying attention to his actions, and now he came over to take a look, and asked the supervisor in a low voice, "What grade is the quasi-part assigned to him?"

The supervisor also replied in a low voice: "Rough..."

Since the batch in charge of cutting are all the most proficient mechanism apprentices, most of the factory produces standard parts, and very few low-quality parts.Assigning rough parts to Chang Ming for production is obviously worried about this newcomer who just entered the factory.

In just two sentences, Chang Ming had already polished a part and threw it out. The foreman frowned: "So fast...it's too hasty!"

The supervisor didn't speak, and immediately went to pick it up for testing.With this detection, he immediately widened his eyes——

"standard--!"

____________________________________________________________
The rice was all steamed, and I was about to finish the meal, but was called out by Lin Hai, Hua Da, Guo Nu, and went out to eat.Mianji is gone!Come back and work hard!Please recommend, please collect, please click~~~~~~~~~
(End of this chapter)