Otherworld's Organ Master

Chapter 30 God Man!

Sanding is the most labor-intensive job in the wood factory, and it is relatively technical, so the salary is much higher than that of wood.

Generally speaking, it takes 3 minutes for a skilled hand to polish a fitting, and 30 seconds for gluing.The requirement of qualified workers is to maintain the precision of parts, and some masters can polish parts with higher precision.

The reason is simple, the lack of precision may be due to less or more.If there is less, there is no way to make up, but if there is too much, it can be cut.

Therefore, the foreman and supervisor were surprised to see that Chang Ming could polish standard-quality accessories with rough quality, but they didn't think it was too much.But the key point is that it took about 2 minutes before and after Chang Ming. This speed is terribly faster than that of experienced craftsmen!

It's luck...

The foreman and supervisor looked at each other and couldn't help but think so.

The two of them stared at Chang Ming's movements at the same time. Sure enough, Chang Ming spent a full 5 minutes on this accessory, but the result was still rough and rough, without any improvement.

It really is luck...

The foreman and the supervisor breathed a sigh of relief at the same time, and watched the others go.

Chang Ming was also muttering in his heart at this time.

For the first part, he could tell at a glance that the precision was rough because the cutter was too careful, leaving too many places.And although this cutter is careful, his basic skills are not bad, and most places are smooth.In this case, he does not need to polish the whole, but only needs to modify the incomplete places, especially the places that are too much, and grind away some, so as to improve its accuracy.

Therefore, for him, this accessory is equivalent to the prototype of an accessory. According to his level, if it is improved, it can be regarded as excellent.

But as soon as he started, it didn't feel right.

This piece of sand rhinoceros leather looks relatively hard, but when rubbed on it, it feels harder than expected.He wiped it and thought to himself: It's broken!There is no way for this accessory to be refined by polishing, it can only be changed to a standard part.Fortunately, there are not many places that need to be modified, and it is completed with a little modification.

With a sound of "ding", the points increase by 1 point.

This is a first-class material. Originally, standard parts could increase five points, but Chang Ming only completed one step, and the points did not increase much.

Sure enough, I still have to continue to be promoted...

However, being promoted is one thing, and now he is more concerned about the tools in his hand.

His main work before was done in the dilapidated alchemy room of the institution.Although this organ room is dilapidated, the various tools inside are excellent.It's just that these tools can only be used inside the mechanism room and cannot be brought outside.Chang Ming is used to making accessories in the machine room, and he is a little uncomfortable with the unfamiliar tools outside.

It was okay when I was straightening the wood just now, after all, it was a rough job, and it was enough to test the sharpness of the ax a little.But now polishing is a delicate job, and the difference is a thousand miles away. The feel of the sanded rhinoceros leather is a little bit worse, which makes the quality of this accessory drop by a level.

The next accessory, while rough in quality, is actually close to inferior.The cutting workmanship is very sloppy, the basic skills are not good, and the flaws are particularly large.While Chang Ming got used to the feel of the sand rhinoceros skin, he polished it meticulously, and it turned out to be much slower than before.

The foreman only looked at it at first, and then ignored Chang Ming.He is responsible for managing the workers in the grinding area, but he is also a skilled craftsman himself, and he is immersed in it as soon as he gets busy.In fact, this kind of delicate work is like this, and it is especially easy to make mistakes if you are not paying attention.

When it was almost noon, the foreman put down the parts that had just been glued and painted with his right hand, and reached for the original parts with his left hand. He looked up and thought to himself: It’s almost time for lunch, isn’t it?
Just as he was thinking, he was taken aback suddenly, and his left hand was empty!

He reached into the box to check, and it was empty!
How is this going?Cutting is also fine work, but it is much faster than grinding.Generally speaking, the arrangement of personnel at the back is tighter than that at the front, just to prevent the situation that there is no work to do.He had never seen a situation where there was nothing to do.

Problems in the cutting zone?The foreman raised his head suspiciously, glanced at the cutting area, and looked through the gap between them. Everyone there was working normally with their heads down.

At this time, a fifteen or sixteen-year-old worker hurried past him, and he stopped him and said, "Xiao Hong, what's going on?"

In fact, not all workers in the factory are apprentices.There are also children like Xiao Hong who have not been admitted to the office as apprentices and have some connections with the factory. They come in and are responsible for some work that does not require technical content such as transportation and distribution.Xiao Hong is in charge of arranging the accessories in the cutting area and grinding area, and his hands and feet have always been quick.

Xiao Hong said: "Boss, the accessories in the grinding area are used up, I have to go to the cutting area to get them!"

The foreman frowned: "How could it be used up? You were lazy just now, didn't you? You dare to be lazy in the finished product department, be careful to demote your post!"

Xiao Hong said aggrievedly: "Boss, I am not lazy, look at the sweat on my head!"

Sure enough, he was sweating profusely, and his face was also red, and he was obviously tired.

The foreman frowned and said: "You are not lazy, how can there be not enough accessories in our district?"

Xiao Hong said, "Boss, don't you know? There's a genius in our district!"

The foreman was stunned: "God man, what god man?"

Xiao Hong pointed to the corner: "There!"

The seating arrangement in the grinding area is very particular, with skilled workers near the aisle and novices near the inside.For example, the foreman is in the aisle closest to the cutting area.

This is normal. Skilled workers do a lot of work and require more original accessories. Of course, the sitting position should be more convenient for transportation.Newbie... just take your time.

What Xiao Hong was referring to was the corner of the polishing area. Generally speaking, the newcomers were sitting there!

The latest rookie in our district?

The foreman suddenly realized that it was the young man who was specially greeted by the steward just now!

What's going on, is there something wrong with him?
The foreman stood up, frowning, and walked over there.At this time, more grinders found that the original accessories were not enough, and a middle-aged worker with a beard shouted: "What's the matter with Xiao Hong! Why is the gear out of stock!"

After a while, many people began to ask questions. Seeing the foreman frowning and walking towards the corner, their eyes followed.

The foreman went to the corner and saw the young man sitting with his head bowed, the box on the right was empty, and the box on the left contained two original accessories.

Damn, everyone is gone, why is there still here!What the hell is Xiao Hong doing!

When there were still ten steps away from the young man, he just finished painting an accessory, threw it into the box on the right, and grabbed another one in the box on the left.At this time, a hand stretched out and grabbed the finished product just now like lightning.The foreman saw that the supervisor was standing next to him, and he grabbed a finished product.

When he was five steps away from the young man, he reached out to the box on the left again...

What?how so fast!
No wonder the original accessories are not enough, they are all messed up by him like this!

The foreman quickened his pace, walked behind the young man, and shouted: "What are you doing! The accessories are not for you to play with, and you have to pay for them if they are worn out!"

The young man didn't seem to notice him coming at all, and still lowered his head, concentrating on the work in hand.The foreman became even angrier, and raised his hand to grab the young man's shoulder.

Before catching it, the young man threw the accessories in his hand into the finished product box on the right, and reached out to grab it on the left.

When he grabbed it, he caught nothing like the foreman just now, and immediately shouted: "There are no accessories!"

Xiao Hong trotted over with a bamboo basket in his arms, and said, "Come on, come on!"

He didn't stay in other positions at all, and rushed directly to Chang Ming's seat, grabbed a few handfuls, and filled the box of original accessories to the brim.

Chang Ming started the next stage of work without hesitation. During the whole process, he didn't look up at the foreman except for turning his head and yelling when he found that the accessories were gone.

The foreman gave Xiao Hong a hard look.This kid has also been working in the factory for more than a year, and has always been very sensible, so how come he doesn't know the seriousness at this time?How can we see who is doing fast and increase the amount?Depends on quality, quality!What good products can be produced so quickly?
He turned his head and scolded the supervisor: "How do you supervise? Don't stop him if the quality is not good! Just let him be so nonsense?"

The supervisor was holding the accessories in his hand in a daze. Hearing what the foreman said, he turned around in confusion: "The quality is not good? What is not good quality?"

The foreman pointed at Chang Ming, and shouted: "This kid's job! Doing so fast is a complete waste of accessories!"

The supervisor stretched out his hand and handed over the two parts that he had just made. The foreman took it suspiciously and looked down.Seeing this, he widened his eyes again: "What? Standard parts? Is this also a standard part?"

The supervisor looked at him with a wry smile, and whispered, "Do you know why I'm here? So far today, the standard rate in the grinding area has increased by 10 points compared to usual!"

The foreman did some calculations, then immediately "hissed" and said, "Ten o'clock?"

Their factory is relatively large near Jintan City, and one advantage is that the quality of the accessories is good.Just like all factories, their factory is mainly based on institutional apprentices.If the standard rate of accessories produced by apprentices in institutions can reach 40%, they are already qualified apprentices.But their factory has relatively high requirements on technical standards, and the standard rate of accessories can reach 65%.It is precisely because of this that the manager only showed a disappointed expression when the standard rate of misunderstanding Chang Ming was only 40%.

The standard rate is already high, and it is very rare to increase it by a single cent on this basis.And Chang Ming actually improved by ten points, it's unbelievable!
The two looked at Chang Ming together, and the foreman remembered what Xiao Hong said just now, and murmured: "A man of God, indeed a man of God..."

The supervisor whispered: "Even if Fu Hai comes back, it's almost like this, right?"

The foreman pondered for a while: "Hey, it's really hard to say!" He looked up at Chang Ming, "But it's really a pity that this kid is released to our district..."

——————————————————————————————

Ask for collection, please recommend, please click~~~~~
(End of this chapter)