Black Technology: Start with Ten Thousand Times Speed

Not only Longguo netizens are paying attention to this.

Many netizens overseas also followed the press conference through the live broadcast room.

After all, Su Xin is the most famous scientist in the world today, and he single-handedly triggered the economic crisis in Sakura Country a few days ago, and even caused economic turmoil around the world. He is definitely the most high-profile figure during this period.

Even if the press conference he holds in person is not publicized, many people will pay attention immediately.

However, most overseas netizens are not optimistic about Su Xin’s upcoming lithography machine.

Longguo's lithography machine industry chain is still too backward, and it cannot be changed by one person.

Even though Su Xin has developed so many advanced supporting technologies, those supporting technologies still represent advanced industrial chains, rather than independently developed technological products.

I don't believe it. No matter how powerful Su Xin is, he can open up all the relevant industrial chains at once? He can reach the top in one step?

That's just not realistic.

I am optimistic that Su Xin can lead the rise of Longguo's semiconductor industry, but that is by no means something that can be achieved in a year or two.

In my opinion, what Su Xin is going to release now is probably one of the core technologies in lithography machine manufacturing. Perhaps it is just this technology that has reached the world's top level.

If the lithography machine is released directly, the process should not exceed 20nm.

At this moment, the semiconductor industry around the world is paying attention to this conference.

Netizens at home and abroad are constantly discussing it.

Practitioners in the industry are also speculating, and a few people are worried.

Under such a lot of attention.

The press conference officially began.

Su Xin, as usual, dressed in a clean and tidy casual suit, walked up to the stage and announced the official opening of the press conference.

Just before I took the stage, I saw a lot of people talking. Everyone seemed to have guessed what product I was going to release today.

Then I won't tell you anything.

Su Xin smiled and pressed the remote control in his hand.

On the big screen behind him, a pattern of a huge mechanical equipment suddenly appeared.

That's right, it's a photolithography machine.

This is the first lithography machine product independently developed by Tianqixin Technology, and it is also the first major achievement hatched by Tianxin Industrial Park. I named it Tianqi No. 1.

This is the result of the joint efforts of all enterprises in the entire Tianxin Industrial Park, and it is also Longguo's first self-developed and self-produced cutting-edge lithography machine.

Hearing this, many people's expressions changed slightly.

In the lithography machine industry, there is actually no clear division into the so-called low-end, mid-range, high-end, and cutting-edge. They are just the conventional names used by people in the industry.

According to the current industry technical standards, usually only processes above 10nm can be called cutting-edge.

At this stage, the only cutting-edge lithography machines that can be called are ASML’s 5nm, 7nm, and 10nm process models.

Although no one prohibits other manufacturers from claiming to be cutting-edge, in the face of ASML's absolute leading advantage, other lithography machine companies still want to save face and will not humiliate themselves.

But now, Su Xin actually claims to have developed a cutting-edge photolithography machine?

Based on everyone’s understanding of Su Xin, Su Xin is definitely not a braggart. So, has he really developed a lithography machine above 10nm?

Think of this.

Many people took a breath.

The Internet is also abuzz.

Su Xin looked calm, pressed the remote control in his hand, and the screen behind him switched to another screen.

Tianke-1 uses extreme ultraviolet lithography technology, using extreme ultraviolet light with a wavelength of 13.5nm...

Following Su Xin's introduction, everyone gradually came to their senses and listened carefully to each parameter.

Of course, ordinary people don't understand these things. They only know whether they are advanced or not depends on the manufacturing process.

The smaller the process, the higher the precision and advanced the photolithography machine.

After a few minutes.

While many netizens were waiting anxiously, Su Xin finally introduced the technical principles and main performance parameters of Tianke-1.

Finally, Su Xin pressed the remote control again.

The screen switched on the big screen behind them, and several of the values ​​made everyone's eyes widen in an instant, and they couldn't help but stop breathing.

Su Xin smiled and read out the number: Its manufacturing process is... 3nm.

When Su Xin finished these words, everyone at the scene felt as if they had just woken up from a dream. The whole place was in an uproar. Some of the semiconductor industry executives present were so shocked that they stood up.

3nm?!!

Are you kidding me?!

How is it possible to reach the sky in one step, directly breaking through from 90nm to 3nm?!

This is too exaggerated!

This TM suddenly bridged the gap of several generations and directly surpassed ASML's most advanced lithography machine products. How is this possible?

If it wasn't Su Xin who said this, I would have started to curse. This is simply treating everyone like a monkey. However, since he is Su Xin, does this mean that all of this is true?

It's incredible.

3nm! Dragon Kingdom finally broke through the blockade and finally has its own cutting-edge lithography machine!

The semiconductor industry in Dragon Country is about to rise!

Some Longguo semiconductor industry executives at the scene couldn't help but feel excited. They didn't care that the press conference was not over yet, and they didn't care that Su Xin was still standing on the stage. They shouted excitedly on the spot.

Some people even burst into tears and took out their mobile phones on the spot to share the exciting news with other executives of the company.

As everyone knows, almost the entire semiconductor industry's top executives are paying attention to this conference. When Su Xin mentioned the 3nm process, everyone else also knew the news.

In addition to the excitement on the faces of Longguo semiconductor industry executives, the executives from major overseas semiconductor companies also had solemn faces.

Especially as a direct competitor of Apocalypse Technology, ASML is currently the only company on the market with cutting-edge lithography machine manufacturing capabilities. Their vice president Marcello Rimbaud also attended this new product launch conference as a guest.

At this time, Marcello's face was gloomy, and his eyes showed deep uneasiness and panic.

If the data Su Xin just said is true, then ASML will face unprecedented severe challenges.

Apocalypse Technology Co., Ltd.

Behind it are Tianqi Group, which has the world's largest financial strength, Su Xin, which has the world's largest research and development capabilities, Longguo's entire industrial chain, and the world's largest semiconductor market.

Whether it is capital, technology, cost or market, it is the world's number one. As long as the production scale increases, it will immediately become the world's largest lithography machine manufacturer.

The only question is, are the various parameters Su Xin said true?

If it were someone else standing on the stage, Marcello might have thought the other person was bragging.

But Su Xin...

There is no doubt about it.

Tianqixin Technology Company must have really developed a 3nm process lithography machine, which is a level higher than ASML's 5nm process.

And it is a level that cannot be surpassed in the short term.

The most important thing is that Apocalypse Technology Company has just started, and Su Xin has just set foot in the photolithography machine manufacturing industry, and has achieved such amazing achievements. After he stabilizes and has sufficient industry experience, with Su Xin's With its terrifying R\u0026D capabilities, it will surely be able to easily secure its position as the strongest lithography machine manufacturer, and no one can shake it.

And Asmai will be reduced to second rate from now on.

This is not a possibility, but a necessity.

Thinking again, judging from the past history of Longguo, whenever they break through an industry, the price of this industry will be quickly reduced to cabbage prices due to their advantages in the entire industry chain.

Then, with its strong production and manufacturing capabilities and the cost advantages brought by the entire industry chain, it has swept the world unrivaled.

Make those manufacturers who once made easy money miserable.

When he thought of this, Marcello's breathing stopped for a moment.

He had a strong premonition that Asmai's life would be difficult in the future.

Without high profits, not only will their lives be much more difficult than before, but they will also have much less money for research and development. Their competitiveness will become worse and worse in the future, and they may even continue to fall to the bottom in such a vicious cycle.

In the end, everyone disappeared.