My Galaxy Technology

Speaking of BE Company, many Chinese people will feel very unfamiliar.

In addition to people in the industry, there is only one place where many people who are familiar with BE Company are: the leek farm, where the leeks are green and green, and they are cut over and over again. The leek farm has tortured me thousands of times, but we, the leek, still treat it like first love. Well, that’s right, the leek market is the stock market.

The stock price of BE Company has been very strong and low, which is outrageous!

From the time it was listed to the present, it can also be said that it has been decades. Except for a small increase when it was first listed, it has never risen until now. It has been falling to the limit. I don’t know how many retail investors have been trapped.

I think back then, when Zhou Feiyu just graduated, he heard that BE Company had invested in building the world's highest 10.5th generation TFT-LCD production line in Luzhou, and the future was promising, so he bought a stock of BE Company, and ended up losing money. , successfully had his tail cut off, and reluctantly quit.

Later he figured out that he was still too naive.

BE Company has not yet reached a high point, and is far from being a rival to Samsung, the mobile phone glass manufacturing giant in the country, so it is not yet time to report high profits.

Every time there is financing or good news, most of it is that BE Company is short of money again and needs to raise funds from the stock market to replenish its blood. Otherwise, it will not be able to find the money to invest in so many advanced production lines. Each production line, whether it is a TFT-LOLED production line, requires tens of billions of funds.

In addition to BE's own revenue and state subsidies, only the stock market can raise so much funds.

It is difficult for other investment banks or the companies of the richest man to switch to BE operations.

Looking at those Internet companies, burning hundreds of millions, billions, or tens of billions of money, it sounds very huge and prohibits countless people. But comparing the operation of BE, it can only be said that it pales in comparison and is completely inadequate. A production line only costs tens of billions to start, and the subsequent labor, raw materials, research and development, investment, etc. have not yet been calculated.

This is the horror of high-end industry!

Therefore, industrial upgrading, the third industrial revolution, and smart manufacturing 2025 can only really happen in China or Yingjiang. It can even be said that the progress of larger-scale industrial systems in the future can only happen in China. The investment is really too huge. In addition to funds, this huge amount of human resources also requires mountains and seas.

Without hundreds of billions or trillions of funds, and without millions of engineers worth over RMB 100 million, how can you carry out higher-level industrial system changes?

Luzhou, BE Company.

In a large office, a group of people were having a fierce quarrel.

...There are so many defective products in recent trials. The display effect is not good and there are residual images. There must be something wrong. It cannot be defective for no reason. Have your R\u0026D personnel looked at the raw materials? Your process department has Haven’t you checked whether there is a problem with the process?”

Qin Wei, the boss of the project, is very annoyed. A newly developed dual-hole screen project developed by Zhongzheng Company uses their own glass, and he is responsible for the docking.

I thought that this kind of mid-to-low-end project would be within reach for them. After all, BE Company in Luzhou has the world's top production lines. He never expected that there was no problem with the supply during the sample stage, but now that it was in the trial production stage, defects occurred continuously during the trial production stage. He was suddenly under great pressure.

For a mobile phone glass, during the sample or trial production stage, a certain number of samples will be produced first, and only after confirmation that there are no problems will the remaining quantity be released. This kind of first production is called trial delivery.

According to past experience, a lot of double-hole screens have been made, and there should be no continuous problems.

But it happened this time, and I tried casting four or five times in a row, but couldn't solve it.

The head of the R\u0026D department said with some helplessness: All the raw materials are consistent with the samples. We verified the same materials, different brands and different batches one by one, but the result was that we could not solve this afterimage problem. I wonder if it is the equipment or the process. There is something wrong with the parameters.

As soon as these words came out, the person in charge of the process department immediately stood up with a look of displeasure on his face and retorted: It's impossible. We've checked it all. The equipment and process parameters are all the same as the samples. We also I have verified different process parameters and wire bodies, but the results are the same. I think this must be the batch difference of the PI film. The problem of image retention is that the performance of the PI film is not up to par, and it occurs when it passes through the wire body. Changes caused problems in the liquid crystal molecules, so it appeared.

The quality manager who participated in the review looked at the three of them and continued to lower his head to watch the operation of the mobile phone.

It has nothing to do with him, so it's better not to get involved so as not to get angry.

As the person in charge of the project, Qin Wei felt annoyed and helpless when he heard that the two men were talking about the public's reasons and the mother-in-law's talking about the reasons.

They are professionals in R\u0026D and craftsmanship. They are much more professional in glass R\u0026D and production than he was in this project. They all said it was no problem and made sense, so he just took it easy.

No matter what, as the project leader, he is ultimately responsible for the performance of the project on the client side.

R\u0026D and technology are within the factory, not externally.

Just now you said there are batch differences in the incoming materials of PI films?

After all, Qin Wei was clear-headed and did not mess up his position. He noticed the words of the person in charge of the process department, and he tended to believe the person in charge of the process department. After all, R\u0026D is just design, and the product is made by technology. The opinion of the technology department is undoubtedly More substantial.

Yes.

The person in charge of the craft department nodded.

Qin Wei immediately asked the person in charge of the R\u0026D department: Have you tried other batches of PI films?

When the head of the R\u0026D department heard what he said, he immediately knew that Qin Wei believed in craftsmanship and not him. His expression immediately changed and he said angrily: Of course I tried it. Didn't I just say that? It still doesn't work. It's the same. Problem.

Qin Wei was scratching his head now: Then what should we do now? Let's talk to everyone. Things can't come out, and the delivery date is delayed. We have to give an explanation to Zhongzheng Company. Everyone has not hired anyone, so we can only make one up. Please reply to Zhongzheng Company with the reason first.

The person in charge of the R\u0026D department was startled when he heard this, and then smiled bitterly.

The person in charge of the process department was not in the mood to argue with the R\u0026D people at this moment. Zhongzheng Company was not easy to deal with.

It was the person in charge of the quality department who broke the deadlock. He coughed and said, Let's talk to Zhongzheng directly and ask for their opinion.

Qin Wei looked at everyone present and saw that no one else had anything to say, so he said, Does everyone agree? If so, I will...

The head of the R\u0026D department interrupted him: Wait a minute, I remember that Zhongzheng Company recommended a PI film and said it wanted to verify it on this project. How about we try it first?

Qin Wei's eyes suddenly lit up and he said quickly: Since it is recommended by Zhongzheng Company, let's try it first.

The person in charge of the craft department twitched his lips slightly, wanting to voice his objections, but he hesitated and decided not to give it a try first.

Under normal circumstances, any new material must be developed and the process verified before it can be used in BE's projects, even if it is given by the customer.

But now, they have run out of options and can only give it a try first.