Rebirth: I carry a desktop computer inside me

At noon, Jiang Cheng took a pat of the appointment letter and sent it to Yu Xinran to read.

"Awesome, actually entered the presidium!" Yu Xinran sent a text, accompanied by a series of thumb likes.

Jiang Cheng: It's okay, it's worth it.

Yu Xinran: But I guess you will have more things.

Jiang Cheng: Well, I still want to put out the Hua Guo immersion lithography machine as soon as possible, only in this way will chip manufacturing not be stuck in the neck in the future.

Yu Xinran: Looking forward to that day. / Hugs

....

However, just as many participants took a quiet lunch break, the news of the establishment of the Hua Guo Lithography Machine Industry Alliance was quickly released by the official media.

One stone stirred up a thousand waves.

In the vicissitudes of Weibo, the comments below are varied.

[AmriGreat: Yo, the alliance has been established again, I remember the establishment of the Integrated Circuit Alliance a few years ago, what are the results?

Young Hua Guoqiang: Hua Guo finally attaches importance to the lithography machine, and I believe that the country will be able to succeed.

I never believed in those laborers: it seems to be good for Big A, so why is it still down 5%!

Big A needs ICU: upstairs, people big A gave face, didn't they take a few steps up in the morning?

......

Of course, this news, on the whole, is still exciting.

Some of the long-term ones are already digging at the bottom.

Zhang Wumou received a telephone interview from the media at noon.

"Mr. Zhang, I just received the news that the mainland held a conference today to establish the Lithography Machine Industry Alliance, what is your comment on this?" As soon as he spoke, the reporter asked directly.

Zhang Wumou was very unhappy and replied directly, "They are just using the power of the mainland, and they are not capable of manufacturing EUV lithography machines." Please don't ask me this question again in the future, OK? Then

he hung up the phone.

In the windmill country, ASMAL, the person in charge of Asian market information reported the news to the company's CEO Daina for the first time.

"Hua Guo, they have always done everything themselves." Dana sneered, "But they don't know that the lithography machine is the crown jewel of the semiconductor industry, and it takes endless money to succeed."

"Mr. Dana, you need to know that since 2010, China has been the world's second largest economy, and with their huge size, there is enough money for the research and development of lithography machines." The person in charge continued to remind.

"No, immersion lithography machines, I believe they may be able to make them in five or six years, but EUV lithography machines, even if they give them drawings, they can't make them." Dana shook his head and smiled.

"EUV

lithography machine, is it really so terrifying?"

Others may not know, but Daina knows.

That's really the limit of human intelligence.

---- (* ̄〈 ̄)

---- Not to mention the disturbances on the Internet outside, after the establishment of the Huaguoguang Science and Technology Industry Alliance, exchanges and discussions began in the afternoon.

Each member company has the right and opportunity to report on the stage, publicize their current research results, communicate frankly on related issues, and conduct in-depth discussions to promote the lithography machine industry.

The first person to report on stage this afternoon was He Ming of Modu Microelectronics.

"Dear leaders, entrepreneurs, I am He Ming, chairman and CEO of Modu Microelectronics, first of all, thank you very much for your trust, and elected me as the vice chairman of the presidium of the alliance, here, I solemnly promise, fully support and cooperate with the lithography machine industry alliance cause, and strive to achieve the successful research and development of IC front-end manufacturing lithography machine with 28nm process in the shortest possible time."

Subsequently, He Ming publicized the products currently developed by the company in the PPT report.

Including the newly developed 90nm resolution front-end manufacturing lithography machine, using four-fold reduction magnification projection objective, process adaptive focus leveling technology, and high-speed and high-precision self-vibration damping six-degree-of-freedom workpiece table mask technology.

At present, only one FAB company in China adopts such a one.

It is said that it is not particularly mature, and the yield rate is not comparable to Asmail's second-hand old lithography machine.

In addition, there is a packaging lithography machine, which can reach 40/50nm process, and after successful research and development, it has forced foreign related types of lithography machines to reduce the price by more than 1/3.

Then, in terms of problems, He Ming cried poverty.

“...... The research and development of advanced process front-end lithography machine has always been the direction of our company's efforts, but at present, due to the extremely high cost of research and development, the important components required for the immersion lithography machine of the 28nm process have not yet been developed, which affects our next research and development......"

After the debriefing, there is a direct discussion and questions.

"May I ask Mr. He, has your company's 28nm front-end manufacturing lithography machine been approved, and how much money is expected to be needed for research and development?"

He Ming took the microphone and replied, "At present, the project has been established, and it is estimated that more than 10 billion research and development funds are required, and it is necessary to see the product research and development of various important component suppliers." But

the next business representative spoke a little sharper.

"Mr. He, let me be honest, I have doubts about your company's research and development capabilities. The 90nm resolution front-end process lithography machine also has many problems. How to make us believe that you can definitely develop a new lithography machine? "

Straight to the point, very sharp.

Even He Ming's face on the stage was not good.

Jiang Wei was a little drowsy, but when he heard this, he was not sleepy like everyone else, and looked at the person who asked the question.

But it is Wang Yunfei, the boss of Huaxing Micro, who has always been known for his straightness.

He Ming paused and said, "If any company's products only stay in research and development, and are not used by manufacturers, they cannot solve the problems encountered in actual production, let alone continuous research and development and improvement." It is believed that the establishment of the alliance will definitely be able to gather forces and jointly promote the pace of research and development of higher process lithography machines. "

What he said is that the product I developed, no one uses it, no one responds to the problem, how to continue to develop it?"

Of course, lack of money and motivation are the key reasons.

Packaging lithography machines are more advanced, occupying more than 70% of the domestic market, but they also stay at making this money, but they are not so enthusiastic about the front-end manufacturing lithography machine.

A few questions followed, but it was normal, and some people asked about open financing.

However, on the last day of the meeting, a special financing matchmaking meeting was arranged.

After He Ming, Xian Zhufeng of OPPLE Optoelectronics reported on the research progress and products of their Ivy Optical Machine Factory and enterprise.

But when reporting and publicizing, it is natural to hype up your best place, and the problem is shallow and skimmed.

Even if they have developed 100-watt-level micro-small vertical cavity surface emitting semiconductor laser modules, high-beam quality semiconductor laser cutting light sources and other products, they are still in the laboratory stage.

At present, OPPLE Optoelectronics is still more famous in opto-mechanical and electrical instruments, photoelectric measurement and control instruments, optical components and other aspects.

Some eye-popping research and development results are more like publicity to increase the market value of stocks.

However, Jiang Cheng was still very interested in several newly developed products of the experimental device they mentioned.

If you need to skip the immersion lithography machine and directly develop the EUV extreme ultraviolet lithography machine, then the important breakthrough is still above OPPLE Optoelectronics, or the Ivy Light Machine.

After the meeting, Jiang Cheng patted Ren Fei's shoulder,

"Chen Mansion Private Chef."