Rebirth: I carry a desktop computer inside me

At 9 a.m. on December 9, it is the official time of the inaugural meeting of the Hua Guo Lithography Machine Industry Alliance.

In Hall 2, under the guidance of many staff, Jiang Cheng and the others entered half an hour in advance, found their place and sat down.

Jiang Cheng sat in Area A as a representative of upstream enterprises, surrounded by unknown entrepreneurs.

However, Jiang Cheng glanced at it, and there was contempt in the other party's eyes, and there was no intention of making friends.

With his eyes closed, he continued to use the computer in his body to continue to carry out experiments on the new processor structure.

Although there has been some progress before, this is a desktop-oriented chip after all, and the internal design of the chip is relatively simple when experimenting.

However, the actual processor chip, the internal transistors are tens of billions of calculations, and the logic circuits involved are unknown.

Although Jiang Cheng has made a new chip architecture with RISC-V chip as the central chip and 6 memristor chips as auxiliary chips in the in vivo simulation laboratory, this is only an analog, and it is only a preliminary design.

It's kind of like, in the lab, just a 7008 processor from the 70s and 80s.

It is relatively simple, and the implemented functions are also rudimentary.

There is still a long way to go before commercial use can be realized.

He needs to build on this humble foundation, continue to deepen the design, powerful functions.

After a while, a clear athlete's march sounded.

Oh, it's the meeting that begins.

A group of people came in through the side door, and in front of the line was the courtyard boss.

The meeting was chaired by President Bai Chunhua of the Chinese Academy of Sciences.

“...... Leaders, entrepreneurs, good morning! Today, the rising sun and warm winter, we gathered together to discuss the grand event and discuss the development together, the main purpose is to hold the inaugural meeting of the China Lithography Machine Industry Alliance. Bai

Chunhua, who was on the podium, dyed his gray hair black, combed it very stylishly, and his voice was loud and powerful.

Next, the Minister of Industry notified two documents: "Notice on the Establishment of the China Lithography Machine Industry Alliance" and "Opinions on Supporting the Development of the China Lithography Machine Industry Chain".

Jiang Cheng listened carefully at the venue, and like everyone else, he looked at the information in his hand.

There are 73 members of the first batch of lithography machine industry alliances, including 22 upstream enterprises including Maple Fire Group, Excellent Precision, OPPLE Optoelectronics, Qingyi Optoelectronics, Han's Laser, etc.; The midstream enterprises are 4 enterprises such as Modu Microelectronics and Huaxin Micro; The maximum number of downstream enterprises includes Warwick and Excellent Micro and so on.

In addition, there are a number of official investment funds and insurance, as well as state-owned enterprise investment enterprises that have actively signed up to participate in investment in various localities, totaling more than 120, with an estimated investment capital of more than 60 billion yuan.

At the same time, the "Opinions" proposed that 20 billion yuan will be arranged every year for five consecutive years as an incentive and support fund, and incentives will be given in tax incentives, listing incentives, product research and development, etc.

And encourage the majority of private enterprises to participate in the investment and financing of the lithography machine industry to accelerate industrial development.

Jiang Cheng looked at these measures and felt that the high-level of Hua Guo was really determined and introduced powerful policies.

The first Bureau and the Executive Chairman and Vice-Chairman will be elected later.

But of course, the CAS has already prepared a preliminary list of recommendations.

Jiang Cheng is on the list of members of the Bureau.

Immediately after, the big guy began to speak.

His speech did not completely follow the script, some improvisation

, "Lithography machine technology, has always been in the hands of some countries in Omi, and with the exponential development of science and technology, the chip manufacturing process continues to improve, in this piece is very likely to be the key link that stuck our neck."

“...... To be honest, after seeing this list drawn up by the Ministry of Industry and the Chinese Academy of Sciences, I was very shocked. It turns out that in our country, many enterprises have been silently fighting in the lithography machine industry for many years. Some enterprises, I have been to investigate, I feel that there I see the path and hope of our Chinese manufacturing transformation and upgrading.

"Supporting the development of lithography machine industry and integrated circuit industry has always been our wish and direction of efforts, I believe that under the leadership of the presidium of our alliance and the joint efforts of all member enterprises, our pure independent lithography machine in China will definitely be able to manufacture, whether it is a DUV or EUV lithography machine, absolutely can not stop the Chinese people who are diligent in research and good at innovation!"

The splendid speech inspired everyone's enthusiasm.

Warm applause salutes Yuan Cheng's speech.

Around eleven o'clock, member companies begin to elect their presidiums.

The results are not much different from the list that was brewed.

The first Hua Guo Lithography Machine Industry Alliance has a total of 13 members.

Among them, the honorary chairman is Zhao Yang, Minister of Industry.

Chairman: Bai Chunhua, President of the Chinese Academy

of SciencesExecutive Vice Chairman: He Ming, Vice Chairman of Modu Microelectronics:

Gao Xiaogang of Huaxin International, Xian Zhufeng of OPPLE Optoelectronics;

Member companies: representatives of 7 enterprises such as Warwick, Han's Laser, Excellent Precision, and Maple Fire Group.

This is the first time that Jiang Cheng has appeared widely in front of many entrepreneurs.

But when he and Ren Fei and the others arrived at the front desk, everyone was slightly surprised by his youth and handsomeness.

Someone in the audience whispered.

"Oh, he is Jiang Cheng of the Maple Fire Group!"

"I heard that Fenghuo's mobile phone is also his, young and promising."

"A while ago, I developed a mobile phone SOC chip, and it is estimated that I will grow into a large enterprise like Warwick in the future."

"The future is promising, and when the time comes, there will be more friendships."

In his first appearance, Jiang Chengcheng received everyone's surprised and admiring eyes.

This is based on Jiang Cheng's ownership of the Maple Fire Group, which has several extremely profitable and prestigious subsidiaries.

Even if he is young, even if he is only a direct doctoral student, no one on the field dares to look down on him.

Not to mention tens of billions, a net worth of 120 billion, Jiang Cheng still has it.

The newly elected officers were issued letters of appointment on the spot for a period of three years.

The group photo was followed by warm applause.

The end of the election also means the official end of the founding assembly.

Dean Bai Chunhua also preached with excitement on the stage, "... Under the great attention and personal participation of the leadership, the Hua Guo Lithography Machine Industry Alliance was officially established today, which means that from now on, our upstream, middle and downstream industrial chains are tightly twisted into a rope, and strive for the development of nationally independent advanced lithography machines!

"In the afternoon, according to the arrangement of the meeting, first of all, Comrade He Ming of Modu Microelectronics will make a report first, please attend on time." Below, I announce that the inaugural meeting of the Hua Guo Lithography Machine Industry Alliance is over! Meeting! The

applause continued until the big guy left.

After the meeting, Ren Fei stretched out his hand and shook Jiang Cheng, "President Jiang, congratulations!" "

Thanks for your love." Jiang Cheng said modestly.

In terms of fame, he is still a lot worse.

But this list, which was drawn up by the Chinese Academy of Sciences and the Ministry of Industry, naturally also considered a lot.

Among them, the most important thing is to see Jiang Cheng's sincerity to rush and work hard for the development of the lithography machine industry!

With this heart, the future of Hua Guo lithography machine will not be far away.