God-level industrial master

Chapter 221 Opportunity Comes
If you can't find a breakthrough from the Demark Group, you can only find another way, and the system's tasks must be completed.

"Well, I see." Tang Fei waved his hand with a little interest.

Yang Chenglin seemed to have felt the boss's feelings, and he didn't say any more, but just stayed by Tang Fei's side, walking around and taking a look.

Tang Fei stayed in Shenhai City for a total of three days.

It can be said that this trip to Shenhai City was unsuccessful, and his goal was not achieved.However, it was not a waste of time. At least he went to see his own chip base, and he also contacted a relatively powerful planning company in Shenhai City.

Tang Fei told some of his ideas to the planners of the planning company, and they planned and designed the factory area for themselves.

Maybe one or two months later, when the land leveling of this factory area is completed, and the planning and design are also completed, I can start the construction of this factory area by myself.

After returning to Qingjiang City, Tang Fei focused on the design and development of his own servo motor, as well as production preparations.

Tang Fei understands that opportunities are often reserved for those who are prepared. Only when he is prepared early can he firmly grasp the opportunity once it comes.

Servo motors will be serialized to form multiple series, including many types of motors.Zhao Ke and the others are designing and developing it.

With the foundation of successful research and development of the first servo motor, other series of motors are basically "following the gourd", the core technology involved is the same, the difference lies in the power of the motor, the shape is different, and some other parameters are different etc.

Design progress has been relatively smooth.The preparations for the production of the electric motors are gradually getting ready. Under Liu Jiang's specific responsibility, it is estimated that it will be at least a week earlier than the originally expected one month.

Tang Fei knew that only by producing real servo motors by himself, and having real ones, could he truly conquer those foreigners with high eyesight.

This is the passage of time day by day, and Tang Fei is secretly anxious. One-third of the one-month deadline is about to pass.

There was a countdown behind the task released by the system, and every time he saw this countdown, Tang Fei felt a little anxious in his heart.

What to do, what to do!

Tang Fei just came back from the servo motor manufacturing plant. After seeing that many manufacturing equipments were almost debugged, and even the assembly line of the motor was almost ready for use, he felt a little better.

Sitting in his own boss chair, he watched the countdown to the task unintentionally, and felt a little anxious and angry.

Yang Chenglin must know Tang Fei's urgency, and has been paying attention to some things. No, he noticed a news that the capital will hold an international machine tool exhibition, and the opening date will be at the beginning of next month, which is only about half a month from now.

He thought this was an opportunity, so he quickly called from Shenhai City to tell Tang Fei about the situation. Tang Fei's eyes lit up when he heard the news.

Right!

With the development of the domestic economy, especially the gradual improvement of the industrial level, some big cities have begun to hold some international exhibitions, and some foreign companies will also be invited to participate in order to increase the popularity of the exhibition. You can seize these opportunities yourself.

Didn't I taste the sweetness of the last Deep Sea International Industrial Exhibition, and I can also try it at the Beijing International Machine Tool Exhibition this time.

This time the Beijing International Machine Tool Exhibition is also the first.

Because there has never been such an exhibition before, and the current information is far from as developed as it will be more than ten years later, and the Internet has just begun to develop. The dissemination of information mainly depends on newspapers and TV, not the Internet. The exhibition is not surprising.

Yang Chenglin also happened to see the propaganda in the newspaper, so he immediately called to remind him, and Tang Fei immediately realized that this was a good opportunity.

Finally, Tang Fei found a report on the Beijing International Machine Tool Exhibition in a newspaper on the newspaper rack in his office. There was almost an entire page with the introduction of the machine tool exhibition, as well as the contact number and address of the organizer.

Without further ado, Tang Fei picked up his mobile phone and called the phone number on it. It was obvious that Jiuzhou Industrial Co., Ltd. wanted to participate in this exhibition.

The other party asked some information about Jiuzhou Industrial Co., Ltd., such as annual output value, product structure, existing scale and so on.

Jiuzhou Industrial Co., Ltd. does not manufacture machine tools, but it does have things related to machine tools.Such as servo motors, which are exactly what CNC machine tools need, and IGBTs.

IGBTs are also used on CNC machine tools, but generally IGBTs of medium and low voltage levels are the main ones. Now Jiuzhou Industrial Co., Ltd. not only produces IGBTs of high voltage levels, but also IGBTs of medium and low voltage levels.

After the other party asked about Tang Fei's situation, it was probably because this was the first machine tool exhibition and exhibitors needed to be invited to participate in this exhibition. The other party immediately agreed, but they also made it clear that if they participated in the exhibition, they would need to pay a certain fee.

It doesn't matter to pay the fee, Tang Fei understands, after all, this is a commercial exhibition, the organizer can't lose money, right?

After making the phone call, Tang Fei called Wang Hailong over and told him to go to the capital himself to settle the matter of participating in the exhibition.

Wang Hailong went to the capital the next day and returned after only staying in the capital for one night. He successfully completed the exhibition.

Not only did they successfully obtain a booth for Jiuzhou Industrial Co., Ltd., but they also brought back far more detailed information than what was introduced in newspapers.

Several of the top ten well-known machine tool groups in the world will participate in the first international machine tool exhibition in Beijing. As for those generally well-known machine tool manufacturers, such as Japanese and Korean machine tool manufacturers, many will participate.

Domestic machine tool manufacturers, as long as they have a certain scale, have basically received the invitation letter from the organizer, and it is estimated that most of them will participate.

After listening to Wang Hailong's speech, Tang Fei smiled and said, "It seems that there are not many companies participating in this exhibition?"

Wang Hailong said: "There are hundreds of companies, large and small. In addition to machine tool companies, many supporting companies related to the machine tool industry will also participate."

Tang Fei's heart suddenly brightened, as if he saw the hope of completing the task, he waved his hand and said, "Then we are also ready to participate in this International Machine Tool Exhibition."

Wang Hailong said: "Boss, what are the main products we are going to exhibit?"

Tang Fei has already thought about this point. The IGBT products that the machine tool industry needs are his own servo motors.

....
Inside the manufacturing plant of servo motors.

After such a long period of technical preparation and production preparation, we can finally start to try to manufacture servo motors.The initial stage is trial production, and the batches are not large.

There are two types of servo motors in total, and several sets of each will be manufactured first.

There are already many models of servo motors that have been designed. These two models are trial-manufactured first, and after success, the third or even fourth model is trial-manufactured.

All kinds of accessories are already in place, most of them are purchased parts, or manufactured by outside suppliers and sent over, only the more critical parts are manufactured by Jiuzhou Industrial Co., Ltd.

The technology patent belongs to oneself, and it is enough to have a firm grasp of the technology, and there is no need to manufacture some general parts by oneself.

The assembly of the first two types of motors started today. Zhao Ke was at the production site in person, not to mention some key technicians. They have basically been soaking in the factory building since one or two months ago.

On the assembly line, the workers are not very proficient in operation, but it doesn't matter, it is only in the trial production stage, after a period of time, the workers will gradually become proficient in the operation.

As for the trial production, the cycle must be longer than the formal mass production, but it did not take too long. In just a few days, a total of two types of motors, each with several models, were successfully rolled off the production line and the trial production was completed.

The motor is done!

Hearing the great news, Tang Fei excitedly went to the production site and saw the servo motors being made in person.

Excellent quality and excellent performance!

This is Tang Fei's evaluation of these motors. As the chief designer of the first servo motor, Tang Fei only saw the test data of these motors, and gave the above conclusion in his heart.

Jiuzhou Industrial Co., Ltd. has its own motor testing and inspection center. These motors were sent to the comprehensive test bench for testing, and various data came out, which fully confirmed the conclusion given by Tang Fei.

At this time, the start of the International Machine Tool Exhibition in Beijing was approaching. Jiuzhou Industrial Co., Ltd. began to make some preparations before the exhibition, such as transporting its exhibited products to the capital, and then sending people to the capital to deploy its own booth and so on.

Demark Group is also one of the exhibitors at the International Machine Tool Exhibition. In addition to Demark, there are several other well-known companies.

As the saying goes, peers are enemies, which is true.Demark Group has always regarded other well-known machine tool groups as its competitors. Seeing that several competitors will participate in this exhibition, the senior management of Demark attaches great importance to it, and there are quite a few machine tools that will be exhibited. Taiwan is still a relatively advanced CNC machine tool.

The day to participate in the Beijing International Machine Tool Exhibition finally arrived. Tang Fei, Wang Hailong, and Zhao Ke took the plane to the capital.

The booth of Jiuzhou Industrial Co., Ltd. has also been arranged. With the experience of last time, the booth of Jiuzhou Industrial Co., Ltd. is in a better position this time, almost a golden position. This is just a little extra cost.

It doesn't matter if you spend a little more money, you can definitely earn back twice as much.

In addition to various IGBT products, the most important thing to exhibit is the servo motor. Several models have been placed on the booth.

After arriving in the capital, Tang Fei and others stayed in a hotel not far from the exhibition center. After arriving at the hotel, Tang Fei was full of anticipation when he thought that the International Machine Tool Exhibition, which would start tomorrow, would be attended by many international machine tool companies.

.........

Today is the third update, the third update is over, good night everyone!
(End of this chapter)