God-level industrial master

Chapter 222 International Machine Tool Show

Today, the Beijing International Machine Tool Exhibition officially opened.

The exhibition was grandly held at the Beijing International Exhibition Center. Because it was the first session, the organizer specially organized a grand opening ceremony. Many important officials, guests, and executives from well-known international companies participated in the opening ceremony.

There are also quite a few companies participating in the exhibition. The number of domestic machine tool manufacturers and some companies related to the machine tool industry has reached two to three hundred.There are also many foreign exhibitors, including several of the top ten internationally renowned machine tool manufacturers.

The whole exhibition center is very lively.

After the opening ceremony, the venue gradually became lively, with a stream of people. There were managers of various companies, people who needed machine tools, some scholars who researched machine tools, and some were technicians from various manufacturing companies. Students in colleges and universities, ordinary citizens in the capital, and so on.

There are many participating companies and many booths.

Among these exhibitors, there is Zhang Jianxiang and his company. After all, it is a well-known old state-owned machine tool manufacturer in the north, and they have also received an invitation letter.

For such a grand international machine tool exhibition, Zhang Jianxiang and the others will definitely participate.

The exhibition area of ​​each exhibitor is not small, because this is a machine tool exhibition, and the space is too small to even accommodate machine tools, so there is still a woolen exhibition.

Zhang Jianxiang’s exhibition area is more than 100 square meters by visual inspection. There are several exhibiting machine tools, including lathes, ordinary machine tools such as milling machines and drilling machines. In the most conspicuous position, there is also a CNC lathe.

This should only be called a semi-finished lathe.

But this is beyond his control. Zhang Jianxiang knows that if there is no CNC lathe to support the facade, then his exhibition area will be too shabby.

The CNC lathe under development is placed here, and a person-high publicity board is erected next to the CNC lathe, with the introduction of this lathe written on it with pictures and texts.

At his booth, Zhang Jianxiang saw that the exhibitors around him, especially those foreign companies, were almost all CNC machine tools, and there were almost no ordinary machine tools. He felt very stressed.I thought to myself, the gap between our domestic machine tool manufacturing level and developed countries is really big.

Under such pressure, Zhang Jianxiang knew that the only way to do it was to work hard, catch up head-on, and narrow the gap with them.

Well, fortunately, the problem with the servo motor has been perfectly solved, and it is still the most outstanding servo motor in the world. There will be much fewer obstacles in the development of our own CNC machine tools.

If, as Mr. Tang said, they can develop advanced industrial control chips within one or two years, then there will be fewer obstacles in the development of their own CNC machine tools.

"Boss, look over there!"

His subordinates pointed to an exhibition area in the distance, which was the exhibition area of ​​a foreign machine tool company. All of their exhibits were CNC machine tools, and one of the CNC machining centers was processing some workpieces for the people next to them to watch.

Zhang Jianxiang glanced enviously, and secretly said in his heart, one day, we will be able to develop and produce all kinds of CNC machine tools, which will not be inferior to this foreign company.

Japan's Salim Group is also one of the exhibitors this time.

To be precise, Sanlin Electric, a subsidiary of Sanlin Group, participated in the International Machine Tool Exhibition and displayed various motors related to CNC machine tools at their booth, among which servo motors were the main ones.

Masao Mitsui was there, talking with a Japanese man. Judging from this situation, the Japanese man should have a higher position than Masao Mitsui, and he might be one of the managers of Sanlin Electric.

Mitsui Masao said: "Your Excellency Inoue, the China International Machine Tool Exhibition is quite large. For us, this is an excellent opportunity. I have a hunch that there will definitely be many machine tool manufacturers who will take the initiative to come. Order our motors."

"Yoshi!" Taro Inoue said happily, "Mitsui-kun, last time you approached John Breuvel from the Demark Group, how was the situation?"

Mitsui Masao said: "I am going to report to your Excellency that John Brewer has personally agreed to order our motors, but the final decision is made by his boss, who has already sent the order application and related materials to his boss, This matter should not be a big problem, we can just wait for good news.”

"Yoxi!" Inoue Taro was satisfied.

Masao Mitsui thought for a while, and continued: "However, I saw people from Jiuzhou Industrial Co., Ltd., and they seemed to be selling their motors to Demark Group."

"Is it Jiuzhou Industrial Co., Ltd.? A small company in Qingjiang City, Jiangnan Province, China? Are they selling motors to Demark Group?"

After finishing speaking, Taro Inoue laughed so hard that tears almost came out, he quickly took out a handkerchief and wiped it lightly, "Don't worry, such a small company is not worthy of being our competitor at all, they can make What kind of motor, it will not pose any threat to us."

"Hi!"

Masao Mitsui immediately nodded and bent over.

Inoue Taro was a little too arrogant. As one of the directors of Sanlin Electric, he didn't pay attention to ordinary companies at all.

He has always believed that the products of Sanlin Electric are the best in the world, even the top electric motor companies in Europe and America are basically on par with them, and it is difficult to beat them.

A small-scale company in Huaxia, he didn't pay attention to it. When he heard that Jiuzhou Industrial Co., Ltd. was selling motors to John Brewer, he immediately laughed.

Whether their motors can be ordered by the Demark Group, we will know in the future, maybe not as optimistic as he thought, Jiuzhou Industrial Co., Ltd. has really become their strong competitor.

Demark Group is also one of the exhibitors at the International Machine Tool Exhibition.

There are several world-renowned machine tool companies like Demark Group participating in this exhibition.Knowing that several of its competitors have participated in this machine tool exhibition, Demark Group also paid more attention to it and sent an executive over.

The headquarters of Demark Group's Huaxia Branch is located in Shenhai City, and John Brewer also came to the capital from Shenhai City. He is the specific person in charge of Demark Group's participation in this international machine tool exhibition. The executive is just a symbol Just come and have a look.

Kraft, as an executive of the Demark Group, could not arrange the exhibition by himself. John Breuwer was basically in charge of everything. He didn't come over until after the exhibition started to take a look at the booth.

Kraft looked around at the Demark Group's exhibition area and asked some questions about John Breuwer, feeling quite satisfied.

He also knows that this exhibition is a good publicity for Demark Group in China. With the acceleration of China's economic development and the gradual increase in industrial strength and scale, China is a huge market for CNC machine tools.Demark Group's strategy is to enter some of its medium and low-end machine tools into the Chinese market.

After inspecting his exhibition area, Kraft said: "John, there is one thing you need to know. According to very reliable news, our competitor Hamilton Machine Tool Group has ordered a motor manufacturer with excellent performance. It is said that it is the most advanced servo motor in the world, if this is true, it will pose too great a threat to us."

Hearing this, John Brewer was stunned. Is it the most advanced servo motor in the world?It's really not good news to let your opponent have such a motor.

Originally, the technical strength of the Demark Group and the Hamilton Machine Tool Group was about the same. If the opponent suddenly had such a good servo motor, would the CNC machine tools manufactured by the opponent win in terms of performance and surpass their own machine tools?

This is very possible.

John Brewer looked solemn, suddenly, he thought of the introduction about servo motors that Tang Fei left on his desk, if that introduction is true, then the servo motors manufactured by Jiuzhou Industrial Co., Ltd. Absolutely the best in the world.

No, absolutely impossible.John Brewer immediately ruled out this matter in his mind. He didn't believe that a company in Huaxia could manufacture such a good servo motor.

Perhaps it is a powerful motor manufacturer in Europe and the United States, or a motor manufacturing company in Japan, is it Sanlin Electric? Could it be that they have quietly successfully developed the best servo motor in the world.John Brewer thought so in his heart.

"Boss, I will investigate this matter secretly immediately, and will reply to you as soon as possible." John Brewer replied.

"Yes." Kraft nodded, and then said: "We need IGBT products with excellent performance for several advanced machine tools. There is a company in the United States that has developed the fourth-generation IGBT. Go and contact this American company. Let’s see if we can order their IGBT products.”

"Okay, BOSS." John Brewer agreed.

.........

Today, Tang Fei entered the exhibition relatively early, watched the opening ceremony, and saw the appearance of several heavyweight officials.

Seeing that the International Machine Tool Show is so grand and grand, I am filled with joy all of a sudden.Last time at the industrial exhibition in Shenhai City, I received nearly [-] million orders. How many orders can I receive this time at the International Machine Tool Exhibition.

In addition, the task released by the system has entered a countdown, and the task must be completed with the help of this International Machine Tool Show. My own servo motors must enter the European and American markets and win orders from European and American companies.

"Boss, this exhibition is bigger than the last industrial exhibition." Wang Hailong said happily.

Tang Fei said: "Well, this is a good opportunity for us, let's go, let's go to our own exhibition area now."

"Boss, this way, follow me." Wang Hailong led the way. He came here once, and he chose the location of the booth himself. In front of the company's booth.

When Tang Fei saw his booth, Tang Fei was obviously taken aback. It was very different from what he imagined!

.........

Today is the third update, and the first update is here!

(End of this chapter)